Search

In this study, we present improved power characteristics and suppressed phase transition by incorporating elemental doping into a P2-type cathode of sodium ion batteries. A Cu-doped Fe–Mn based P2-type Na0.67Cu0.125Fe0.375Mn0.5O2 cathode was designed based on the calculations of the electronic structure and then examined experimentally. Using first principles, we introduced instrinsic p-type conductivity by elemental doping with Cu. Introduction of Cu generated electron holes above the Fermi level in the electronic structure, which is typical of p-type semiconductors. Charge analyses suggested that the hole generation was driven primarily by the greater reduced characteristics of Cu as compared with those of Fe and Mn. In addition, introduction of Cu retaining high reduced property also suppressed phase transition from the P2 to Z phase by Fe migration to empty Na layers mainly. Electrochemical experiments revealed improved power characteristics upon the introduction of p-type conductivity. This could be attributed to the increase in the electronic conductivity by hole generation in the valence band. This study suggests that the introduction of p-type conductivity could be a rational tactic for the development of promising cathode materials for high performance sodium ion batteries.

Summary The realization of lithium-ion battery (LIB) anodes with high volumetric energy densities and minimal Li plating at high rates remains a key challenge for emerging technologies, including electric vehicles and grid-level energy storage. Here, we present graphene-functionalized Li2TiSiO5 (G-LTSO) as a high volumetric energy and power density anode for LIBs. G-LTSO forms a dense electrode structure with electronically and ionically conductive networks that deliver superior electrochemical performance. Upon lithiation, in situ transmission electron microscopy reveals that graphene functionalization yields minimal structural changes compared with pristine LTSO, resulting in high cycling stability. Furthermore, G-LTSO exhibits not only high charge and discharge capacities but also low overpotentials at high rates with minimal voltage fading due to reduced formation of a solid-electrolyte interphase. The combination of highly compacted electrode morphology, stable high-rate electrochemistry, and low operating potential enables G-LTSO to achieve exceptional volumetric energy and power densities that overcome incumbent challenges for LIBs.

Through a simple gelation-solvothermal method with graphene oxide as the additive, a Cu4SnS4-rich composite of nanoparticles and nanotubes is synthesized and applied for thin and flexible Li-metal batteries. Unlike the Cu2SnS3-rich electrode, the Cu4SnS4-rich electrode cycles stably with an enhanced conversion capacity of ∼416 mAh g-1 (∼52% of total capacity) after 200 cycles. The lithiation/delithiation mechanisms of Cu-Sn-S electrodes and the voltage ranges of conversion and alloying reactions are informed by in situ X-ray diffraction tests. The conversion process of three Cu-Sn-S compounds is compared by density functional theory (DFT) calculations based on three algorithms, elucidating the enhanced conversion stability and superior diffusion kinetics of Cu4SnS4 electrodes. The reaction pathway of Cu-Sn-S electrodes and the root cause for the unstable capacity are revealed by in situ/ex situ characterizations, DFT calculations, and various electrochemical tests. This work provides insight into developing energy materials and power devices based on multiple lithiation mechanisms.

A GeP 3 compound is introduced here for the first time as a promising anode for sodium-ion batteries (SIBs). The compound shows a high capacity and good cyclic stability, which well agree with the first-principle calculation results regarding its soft bonding nature and related innovative mechanical endurance. The binding energies of Ge–P and P–P verify that Ge–P has softer bonding feature with smaller energy variations compared to P–P when the bonding length is changed. In order to confirm the bonding natures and their effect on the mechanical and electrochemical properties, two layered GeP n compounds with different Ge–P content (i.e., GeP 3 and GeP 5 ) have been synthesized using a high energy mechanical ball-milling (HEMM) method. GeP 3 maintains high discharge and charge capacities of 1.274 and 1.269 Ah g −1 even after 150 cycles, respectively, which correspond to capacity retentions of 87.6% and 88.0% from the 5th cycle, respectively. A comparative study on the elastic moduli of GeP 3 and GeP 5 demonstrates how the superior electrochemical performance of GeP 3 is correlated with its more softened bonding feature compared to GeP 5 both in the pristine state and during charge/discharge. The elastic modulus of GeP 3 shows significantly softer features than that of GeP 5 , implying that mechanical stress or strain can be more easily alleviated in GeP 3 than in GeP 5 during charge/discharge. A morphological comparison between GeP 3 and GeP 5 electrodes reveals that GeP 5 electrode undergoes very serious morphology and volume changes, whereas GeP 3 electrode does not show any significant change in good accordance with the elastic modulus comparison from the first-principle calculations.

Ni-rich layered oxides have been identified as promising candidates for commercial cathodes in Li-ion batteries. However, the commercialization has been hindered by severe cyclic degradation and mechanical failure induced by severe phase transformations and fractures. To resolve these challenges by understanding their fundamental mechanisms, we present mechanics-based multiscale investigations to elucidate the fundamental mechanisms of mechanical failure including deformations and fractures. We have also suggested a practical solution to the failure, which involves enhancing electronic interactions between transition metal layers. The methodological framework for our investigations was developed from first-principles atomic calculations, electronic structure, thermodynamics and kinetics for combined phase transformation, phase field modeling, finite element methodology for mechanical deformation, and phase field crack modeling. Our practical solution addresses the electronic interactions that can be strengthened when O ions are reduced by substituting strongly oxidizing elements such as Ti. Our multiscale framework shows that the reduced O ions are responsible for higher fracture toughness, reduced volume changes, stable deformation, mitigated stress generation, and suppressed fractures. Thus, this study proposes a practical solution for the improvement and design of Ni-rich layered oxide cathode materials. Furthermore, the mechanics-based multiscale methodology employed herein could be applied to a number of other solid-state energy materials suffering from mechanical failures.

Phase transformations in most electrodes used for electrochemical energy storages follow the conserved dynamics of combined one- and two-phase reactions, which leads to complicated charge–discharge processes with various voltage plateaus; this could affect an electrochemical performance as a generic phenomenon in electrochemical system. In order to fully describe the combined-phase reactions from the atomic scale to the mesoscale, we propose a multiscale-based phase transformation model that also considers electrochemical states and mechanical deformations. This model predicts the miscibility gap, spinodal region, voltage profile, phase transformation, and stress generations of the combined-phase electrodes in the electrochemical reactions. We apply this multiscale model to high-rate cathode material Li x FePO 4 to fundamentally understand the experimental phase transformation behaviors (Yamada et al., 2006). This model is applicable to various electrodes for phase behaviors too complex to be detected experimentally due to combined-phase reactions.

By preventing electrical contact between anode and cathode electrodes while promoting ionic transport, separators are critical components in the safe operation of rechargeable battery technologies. However, traditional polymer-based separators have limited thermal stability, which has contributed to catastrophic thermal runaway failure modes that have conspicuously plagued lithium-ion batteries. Here, we describe the development of phase-inversion composite separators based on carbon-coated hexagonal boron nitride (hBN) nanosheets and poly(vinylidene fluoride) (PVDF) polymers that possess high porosity, electrolyte wettability, and thermal stability. The carbon-coated hBN nanosheets are obtained through a scalable liquid-phase shear exfoliation method using ethyl cellulose as a polymer stabilizer and source of the carbon coating following thermal pyrolysis. When incorporated within the PVDF matrix, the carbon-coated hBN nanosheets promote favorable interfacial interactions during the phase-inversion process, resulting in porous, flexible, free-standing composite separators. The unique chemical composition of these carbon-coated hBN separators implies high wettability for a wide range of liquid electrolytes. This combination of high porosity and electrolyte wettability enables enhanced ionic conductivity and lithium-ion battery electrochemical performance that exceeds incumbent polyolefin separators over a wide range of operating conditions. The hBN nanosheets also impart high thermal stability, providing safe lithium-ion battery operation up to 120 °C.

Irreversible phase transformation of layered structure into spinel structure is considered detrimental for most of the layered structure cathode materials. Here we report that this presumably irreversible phase transformation can be rendered to be reversible in sodium birnessite (NaxMnO2·yH2O) as a basic structural unit. This layered structure contains crystal water, which facilitates the formation of a metastable spinel-like phase and the unusual reversal back to layered structure. The mechanism of this phase reversibility was elucidated by combined soft and hard X-ray absorption spectroscopy with X-ray diffraction, corroborated by first-principle calculations and kinetics investigation. These results show that the reversibility, modulated by the crystal water content between the layered and spinel-like phases during the electrochemical reaction, could activate new cation sites, enhance ion diffusion kinetics and improve its structural stability. This work thus provides in-depth insights into the intercalating materials capable of reversible framework changes, thereby setting the precedent for alternative approaches to the development of cathode materials for next-generation rechargeable batteries., The irreversible layered-to-spinel phase transformation is detrimental for many cathode materials. Here, the authors show that reversibility can be realized in crystal water containing sodium birnessite by controlled dehydration, leading to enhanced ion diffusion kinetics and improved structural stability.

Solid-state electrolytes based on ionic liquids and a gelling matrix are promising for rechargeable lithium-ion batteries due to their safety under diverse operating conditions, favorable electrochemical and thermal properties, and wide processing compatibility. However, gel electrolytes also suffer from low mechanical moduli, which imply poor structural integrity and thus an enhanced probability of electrical shorting, particularly under conditions that are favorable for lithium dendrite growth. Here, we realize high-modulus, ion-conductive gel electrolytes based on imidazolium ionic liquids and exfoliated hexagonal boron nitride (hBN) nanoplatelets. Compared to conventional bulk hBN microparticles, exfoliated hBN nanoplatelets improve the mechanical properties of gel electrolytes by 2 orders of magnitude (shear storage modulus ∼5 MPa), while retaining high ionic conductivity at room temperature (1 mS cm

The power characteristics of lithium-ion batteries (LIBs) are crucial for the advent of commercialized, high-power applications, such as electric vehicles. Through both first-principles multiscale simulations and experiments, here, we present fundamental understanding on the power characteristics of the high-voltage spinel cathode correlated with its elastic softness and phase transformation in nanodomains for high-power LIBs. Atomic models of LiNi0.5Mn1.5O4 and LiNi0.5Mn1.5−xTixO4 are developed for multiscale phase field modeling based on structural information for the as-prepared nanopowders. The combined computational and experimental investigations suggest that the thermodynamic phase stability of LiNi0.5Mn1.5O4 can be effectively enhanced by the incorporation of Ti into the structure without any change to the redox mechanism. Ti incorporation provides a faster ionic mobility and the improved phase stability because of the reinforced Ti4+–O bonds. Based on the multiscale phase transformation kinetics, LiNi0.5Mn1.5−xTixO4 exhibits an enhanced elastic softness and slower phase separation than LiNi0.5Mn1.5O4 in the nanodomain during Li+ insertion and extraction. Such characteristics are mainly responsible for the improved electrochemical performance at higher current rates, as confirmed by electrochemical experiments. This fundamental understanding of the power characteristics with respect to the correlations with elastic softness and phase transformation will provide a guideline to develop and design advanced materials for high-power LIBs.

We report the introduction of p-type conductivity in high-Mn, Li-rich oxides (HMLOs) by the introduction of Cu doping to improve intrinsic electronic conduction. The study is based on experimental observations and a fundamental understanding through first-principles electronic structure analysis. Although the Cu-doped HMLO (CuHMLO) has a crystal structure identical to the original HMLO, the electrochemical performance of CuHMLO is superior in terms of specific energy and power characteristics. Specifically, CuHMLO exhibits a larger specific capacity with enhanced rate capability, and could be charged at lower voltages and discharged at higher voltages. For the first-principles calculations, HMLO and CuHMLO structures are modeled based on Rietveld refinement of the powder X-ray diffraction data of the powders synthesized herein. The electronic structure of CuHMLO reveals the generation of an electron hole in the valence band, above the Fermi level, indicating p-type conductivity and improving the electroni...

In lithium-ion batteries (LIBs) comprising spinel cathode materials, the dissolution of transition metals (TMs) in the cathodes causes severe cyclic degradation. We investigate the origin and mechanism of surface TM dissolution in high-voltage spinel oxide (LiNi0.5Mn1.5O4) nanoparticles to find a practical method for its mitigation. Atomic structures of the LiNi0.5Mn1.5O4 surfaces are developed, and the electronic structures are investigated by first-principles calculations. The results indicate that titanium is a promising dopant for forming a more stable surface structure by reinforcing metal–oxygen bonds in LiNi0.5Mn1.5O4. Experimentally synthesized LiNi0.5Mn1.5O4 with titanium surface doping exhibits improved electrochemical performance by suppressing undesirable TM dissolution during cycles. The theoretical prediction and experimental validation presented here suggest a viable method to suppress TM dissolution in LiNi0.5Mn1.5O4.

Layered, nickel-rich lithium transition metal oxides have emerged as leading candidates for lithium-ion battery (LIB) cathode materials. High-performance applications for nickel-rich cathodes, such as electric vehicles and grid-level energy storage, demand electrodes that deliver high power without compromising cell lifetimes or impedance. Nanoparticle-based nickel-rich cathodes seemingly present a solution to this challenge due to shorter lithium-ion diffusion lengths compared to incumbent micrometer-scale active material particles. However, since smaller particle sizes imply that surface effects become increasingly important, particle surface chemistry must be well characterized and controlled to achieve robust electrochemical properties. Moreover, residual surface impurities can disrupt commonly used carbon coating schemes, which result in compromised cell performance. Using x-ray photoelectron spectroscopy, here we present a detailed characterization of the surface chemistry of LiNi0.8Al0.15Co0.05O2 (NCA) nanoparticles, ultimately identifying surface impurities that limit LIB performance. With this chemical insight, annealing procedures are developed that minimize these surface impurities, thus improving electrochemical properties and enabling conformal graphene coatings that reduce cell impedance, maximize electrode packing density, and enhance cell lifetime fourfold. Overall, this work demonstrates that controlling and stabilizing surface chemistry enables the full potential of nanostructured nickel-rich cathodes to be realized in high-performance LIB technology.

Through a gelation–solvothermal method without heteroadditives, Cu–Sn–S composites self-assemble to form nanotubes, sub-nanotubes, and nanoparticles. The nanotubes with a Cu3–4SnS4 core and Cu2SnS3 shell can tolerate long cycles of expansion/contraction upon lithiation/delithiation, retaining a charge capacity of 774 mAh g–1 after 200 cycles with a high initial Coulombic efficiency of 82.5%. The importance of the Cu component for mitigation of the volume expansion and structural evolution upon lithiation is informed by density functional theory calculations. The self-generated template and calculated results can inspire the design of analogous Cu–M–S (M = metal) nanotubes for lithium batteries or other energy storage systems.

Ni-rich LiNi0.8Co0.1Mn0.1O2 layered oxide cathodes have been highlighted for large-scale energy applications due to their high energy density. Although its specific capacity is enhanced at higher voltages as Ni ratio increases, its structural degradation due to phase transformations and lattice distortions during cycling becomes severe. For these reasons, we focused on the origins of crack generation from phase transformations and structural distortions in Ni-rich LiNi0.8Co0.1Mn0.1O2 using multiscale approaches, from first-principles to meso-scale phase-field model. Atomic-scale structure analysis demonstrated that opposite changes in the lattice parameters are observed until the inverse Li content x = 0.75; then, structure collapses due to complete extraction of Li from between transition metal layers. Combined-phase investigations represent the highest phase barrier and steepest chemical potential after x = 0.75, leading to phase transformations to highly Li-deficient phases with an inactive character. Abrupt phase transformations with heterogeneous structural collapse after x = 0.81 (~220 mAh g−1) were identified in the nanodomain. Further, meso-scale strain distributions show around 5% of anisotropic contraction with lower critical energy release rates, which cause not only micro-crack generations of secondary particles on the interfaces between the contracted primary particles, but also mechanical instability of primary particles from heterogeneous strain changes.

A combined study involving experiments and multiscale computational approaches is conducted to propose a theoretical solution for the suppression of the Jahn-Teller distortion which causes severe cyclic degradation. As-synthesized pristine and Al-doped Mn spinel compounds are the focus to understand the mechanism of the cyclic degradation in terms of the Jahn-Teller distortion, and the electrochemical performance of the Al-doped sample shows enhanced cyclic performance compared with that of the pristine one. Considering the electronic structures of the two systems using first-principles calculations, the pristine spinel suffers entirely from the Jahn-Teller distortion by Mn(3+), indicating an anisotropic electronic structure, but the Al-doped spinel exhibits an isotropic electronic structure, which means the suppressed Jahn-Teller distortion. A multiscale phase field model in nanodomain shows that the phase separation of the pristine spinel occurs to inactive Li0Mn2O4 (i.e., fully delithiated) gradually during cycles. In contrast, the Al-doped spinel does not show phase separation to an inactive phase. This explains why the Al-doped spinel maintains the capacity of the first charge during the subsequent cycles. On the basis of the mechanistic understanding of the origins and mechanism of the suppression of the Jahn-Teller distortion, fundamental insight for making tremendous cuts in the cyclic degradation could be provided for the Li-Mn-O compounds of Li-ion batteries.

2D materials have shown great promise to advance next-generation lithium-ion battery technology. Specifically, tin-based chalcogenides have attracted widespread attention because lithium insertion can introduce phase transformations via three types of reactions-intercalation, conversion, and alloying-but the corresponding structural changes throughout these processes, and whether they are reversible, are not fully understood. Here, the first real-time and atomic-scale observation of reversible phase transformations is reported during the lithiation and delithiation of SnSe2 single crystals, using in situ high-resolution transmission electron microscopy complemented by first-principles calculations. Lithiation proceeds sequentially through intercalation, conversion, and alloying reactions (SnSe2 → Lix SnSe2 → Li2 Se + Sn → Li2 Se + Li17 Sn4 ) in a manner that maintains structural and crystallographic integrity, whereas delithiation forms numerous well-aligned SnSe2 nanodomains via a homogeneous deconversion process, but gradually loses the coherent orientation in subsequent cycling. Furthermore, alloying and dealloying reactions cause dramatic structural reorganization and thereby consequently reduce structural stability and electrochemical cyclability, which implies that deep discharge for Sn chalcogenide electrodes should be avoided. Overall, the findings elucidate atomistic lithiation and delithiation mechanisms in SnSe2 with potential implications for the broader class of 2D metal chalcogenides.

Critical degradation mechanism of many cathode materials for Li-ion batteries is closely related to phase transformations at the surface/interface. Li2MnO3 in x Li2MnO3 ⋅(1-x) LiMO2 (M=Ni, Co, Mn) provides high capacity, but the Li2MnO3 phase is known to degrade during cycling through phase transformation and O2 evolution. To resolve such degradation problems, it is critical to develop a fundamental understanding of the underlying mechanism. Using first-principles calculations, we identified the surface delithiation potential (4.5 V vs. Li/Li(+) ) of Li2MnO3, which is significantly lower than the bulk redox potential. A lower Mn oxidation state at the surface would reduce the delithiation potential compared with the fully oxidized Mn(4+) in the bulk. As a result, the delithiation would be initiated from the surface, which induces a phase transformation of Li2MnO3 into a spinel-like structure from the surface. These theoretical findings have been confirmed by experimental analyses. Based on these detailed mechanistic understanding, it would be possible to develop rational approaches to modify and coat the surface to suppress degradation mechanisms.