Search

Halide perovskite/crystalline silicon (c-Si) tandem solar cells promise power conversion efficiencies beyond the limits of single-junction cells. However, the local light-matter interactions of the perovskite material embedded in this pyramidal multijunction configuration, and the effect on device performance, are not well understood. Here, we characterize the microscale optoelectronic properties of the perovskite semiconductor deposited on different c-Si texturing schemes. We find a strong spatial and spectral dependence of the photoluminescence (PL) on the geometrical surface constructs, which dominates the underlying grain-to-grain PL variation found in halide perovskite films. The PL response is dependent upon the texturing design, with larger pyramids inducing distinct PL spectra for valleys and pyramids, an effect which is mitigated with small pyramids. Further, optimized quasi-Fermi level splittings and PL quantum efficiencies occur when the c-Si large pyramids have had a secondary smoothing etch. Our results suggest that a holistic optimization of the texturing is required to maximize light in- and out-coupling of both absorber layers and there is a fine balance between the optimal geometrical configuration and optoelectronic performance that will guide future device designs.

Antisolvent-assisted spin coating has been widely used for fabricating metal halide perovskite films with smooth and compact morphology. However, localized nanoscale inhomogeneities exist in these films owing to rapid crystallization, undermining their overall optoelectronic performance. Here, we show that by relaxing the requirement for film smoothness, outstanding film quality can be obtained simply through a post-annealing grain growth process without passivation agents. The morphological changes, driven by a vaporized methylammonium chloride (MACl)-dimethylformamide (DMF) solution, lead to comprehensive defect elimination. Our nanoscale characterization visualizes the local defective clusters in the as-deposited film and their elimination following treatment, which couples with the observation of emissive grain boundaries and excellent inter- and intragrain optoelectronic uniformity in the polycrystalline film. Overcoming these performance-limiting inhomogeneities results in the enhancement of the photoresponse to low-light (

Inorganic-organic hybrid perovskite materials have been a topic of interest for the last few years due to their superior optoelectronic properties. However, the optical properties of perovskite materials are strongly dependent on the film morphology. A textured film morphology is expected to have higher light absorption as well as light out-coupling efficiency compared to a smooth film. There have been numerous methods for controlling and optimizing the film morphology to achieve high efficiency in solar cells and light emitting diodes. Here we have demonstrated that controlled anti-solvent treatment at low temperature can lead to Stranski-Krastanov growth in CH3NH3PbBr3 thin films with superior optical and electronic properties for light emitting diode applications. We have studied their photoluminescence properties at the micro- to nano-scale via fluorescence microscopy, hyper-spectral imaging and scanning near-field optical microscopy. We have demonstrated that the nanostructured micro-islands are highly emissive because of large quasi-Fermi level splitting (QFLS) due to the localization of free charges in the smaller crystals. We have shown that the photoluminescence as well as electroluminescence can be improved by at least seven-fold due to the presence of micro-islands on a smooth background film enhancing light out-coupling. Photo-induced photoluminescence enhancement is also observed in smooth films while micro-islands show photo-degradation.

Halide perovskites perform remarkably in optoelectronic devices including tandem photovoltaics. However, this exceptional performance is striking given that perovskites exhibit deep charge carrier traps and spatial compositional and structural heterogeneity, all of which should be detrimental to performance. Here, we resolve this long-standing paradox by providing a global visualisation of the nanoscale chemical, structural and optoelectronic landscape in halide perovskite devices, made possible through the development of a new suite of correlative, multimodal microscopy measurements combining quantitative optical spectroscopic techniques and synchrotron nanoprobe measurements. We show that compositional disorder dominates the optoelectronic response over a weaker influence of nanoscale strain variations even of large magnitude. Nanoscale compositional gradients drive carrier funneling onto local regions associated with low electronic disorder, drawing carrier recombination away from trap clusters associated with electronic disorder and leading to high local photoluminescence quantum efficiency. These measurements reveal a global picture of the competitive nanoscale landscape, which endows enhanced defect tolerance in devices through spatial chemical disorder that outcompetes both electronic and structural disorder.

With rapidly growing photoconversion efficiencies, hybrid perovskite solar cells have emerged as promising contenders for next generation, low-cost photovoltaic technologies. Yet, the presence of nanoscale defect clusters, that form during the fabrication process, remains critical to overall device operation, including efficiency and long-term stability. To successfully deploy hybrid perovskites, we must understand the nature of the different types of defects, assess their potentially varied roles in device performance, and understand how they respond to passivation strategies. Here, by correlating photoemission and synchrotron-based scanning probe X-ray microscopies, we unveil three different types of defect clusters in state-of-the-art triple cation mixed halide perovskite thin films. Incorporating ultrafast time-resolution into our photoemission measurements, we show that defect clusters originating at grain boundaries are the most detrimental for photocarrier trapping, while lead iodide defect clusters are relatively benign. Hexagonal polytype defect clusters are only mildly detrimental individually, but can have a significant impact overall if abundant in occurrence. We also show that passivating defects with oxygen in the presence of light, a previously used approach to improve efficiency, has a varied impact on the different types of defects. Even with just mild oxygen treatment, the grain boundary defects are completely healed, while the lead iodide defects begin to show signs of chemical alteration. Our findings highlight the need for multi-pronged strategies tailored to selectively address the detrimental impact of the different defect types in hybrid perovskite solar cells., Hybrid halide perovskites are found to contain multiple types of nanoscale defects that play varied roles in charge trapping – from highly detrimental to relatively benign.

Funder: Engineering and Physical Sciences Research Council; Id: http://dx.doi.org/10.13039/501100000266, Funder: Cambridge Trust Scholarship, Funder: Robert Gardiner Scholarship, Funder: Royal Society; Id: http://dx.doi.org/10.13039/501100000288, Halide perovskite materials offer an ideal playground for easily tuning their color and, accordingly, the spectral range of their emitted light. In contrast to common procedures, this work demonstrates that halide substitution in Ruddlesden–Popper perovskites not only progressively modulates the bandgap, but it can also be a powerful tool to control the nanoscale phase segregation—by adjusting the halide ratio and therefore the spatial distribution of recombination centers. As a result, thin films of chloride‐rich perovskite are engineered—which appear transparent to the human eye—with controlled tunable emission in the green. This is due to a rational halide substitution with iodide or bromide leading to a spatial distribution of phases where the minor component is responsible for the tunable emission, as identified by combined hyperspectral photoluminescence imaging and elemental mapping. This work paves the way for the next generation of highly tunable transparent emissive materials, which can be used as light‐emitting pixels in advanced and low‐cost optoelectronics.

Summary Monolithic [Cs0.05(MA0.17FA0.83)0.95]Pb(I0.83Br0.17)3/Cu(In,Ga)Se2 (perovskite/CIGS) tandem solar cells promise high performance and can be processed on flexible substrates, enabling cost-efficient and ultra-lightweight space photovoltaics with power-to-weight and power-to-cost ratios surpassing those of state-of-the-art III-V semiconductor-based multijunctions. However, to become a viable space technology, the full tandem stack must withstand the harsh radiation environments in space. Here, we design tailored operando and ex situ measurements to show that perovskite/CIGS cells retain over 85% of their initial efficiency even after 68 MeV proton irradiation at a dose of 2 × 1012 p+/cm2. We use photoluminescence microscopy to show that the local quasi-Fermi-level splitting of the perovskite top cell is unaffected. We identify that the efficiency losses arise primarily from increased recombination in the CIGS bottom cell and the nickel-oxide-based recombination contact. These results are corroborated by measurements of monolithic perovskite/silicon-heterojunction cells, which severely degrade to 1% of their initial efficiency due to radiation-induced recombination centers in silicon., Graphical Abstract, Highlights • Halide perovskite sub-cells exhibit strong proton irradiation resiliency • Novel operando characterization distinguishes degradation of individual sub-cells • Perovskite/CIGS tandem solar cells retain 85% of their initial efficiency after irradiation • Perovskite/SHJ tandem solar cells degrade to 1% of their initial efficiency after irradiation, Context & Scale Monolithic perovskite/silicon and perovskite/CIGS tandem solar cells could facilitate large-scale decarbonization of the power sector, provided their long-term stability is proven. In this work, we test the stability of both technologies under high-energy proton irradiation. While this mimics the radiation environment in space, our versatile operando and ex situ methodology is also suitable for studying the long-term stability of multijunction solar cells for terrestrial applications. We find that perovskite/silicon tandem solar cells are unsuitable for space, whereas perovskite/CIGS tandems are radiation-hard, promising cheap, flexible, and ultra-lightweight space photovoltaics. Both the growing demand for smaller, cheaper satellites and the privatization of space exploration are revolutionizing space economics, providing an ideal niche for the commercialization of this new technology until the levelized cost-of-electricity can compete with current terrestrial photovoltaics., We propose and test monolithic perovskite/CIGS tandem solar cells for readily stowable, ultra-lightweight space photovoltaics. We design operando and ex situ measurements to show that perovskite/CIGS tandem solar cells retain over 85% of their initial power-conversion efficiency after high-energy proton irradiation. While the perovskite sub-cell is unaffected after this bombardment, we identify increased non-radiative recombination in the CIGS bottom cell and nickel-oxide-based recombination layer. By contrast, monolithic perovskite/silicon-heterojunction cells degrade to 1% of their initial efficiency due to radiation-induced defects in silicon.

Hybrid perovskites have emerged as exceptional semiconductors for optoelectronic applications. Here, we control the cation alloying to push optoelectronic performance through alteration of the charge carrier dynamics in mixed-halide perovskites. In contrast to single-halide perovskites, we find high luminescence yields for photo-excited carrier densities far below solar illumination conditions. Using time-resolved spectroscopy we show that the charge-carrier recombination regime changes from second to first order within the first tens of nanoseconds after excitation. Supported by microscale-mapping of the optical bandgap and elemental composition, electrically-gated transport measurements and first-principles calculations, we demonstrate that spatially-varying energetic disorder in the electronic states causes local charge accumulation, creating p- and n-type photo-doped regions, which unearths a strategy for efficient light emission at low charge-injection in solar cells and LEDs.

While extensively investigated in thin film form for energy materials applications, this work investigates the formation of APbBr3 structures (A = CH3NH3+ (MA), Cs+) in silicon and oxidized silicon nanotubes (SiNTs) with varying inner diameter. We carefully control the extent of oxidation of the nanotube host and correlate the relative Si/Si oxide content in a given nanotube host with the photoluminescence quantum efficiency (PLQE) of the perovskite. Complementing these measurements is an evaluation of average PL lifetimes of a given APbBr3 nanostructure, as evaluated by time-resolved confocal photoluminescence measurements. Increasing Si (decreasing oxide) content in the nanotube host results in a sensitive reduction of MAPbBr3 PLQE, with a concomitant decrease in average lifetime (τave). We interpret these observations in terms of decreased defect passivation by a lower concentration of oxide species surrounding the perovskite. In addition, we show that the use of selected nanotube templates leads to more stable perovskite PL in air over time (weeks). Taken in concert, such fundamental observations have implications for interfacial carrier interactions in tandem Si/perovskite photovoltaics.

The rapid rise in efficiency and tunable bandgap of metal-halide perovskites makes them highly attractive for use in tandems on silicon. Recently we demonstrated a perovskite–silicon monolithic two...

Metal halide perovskites are attractive candidates for the wide band gap absorber in tandem solar cells. While their band gap can be tuned by partial halide substitution, mixed halide perovskites often have lower open-circuit voltage than would be expected and experience photoinduced trap formation caused by halide segregation. We investigate solar cell performance and photostability across a compositional space of formamidinium (FA) and cesium (Cs) at the A-site at various halide compositions and show that using more Cs at the A-site rather than more Br at the X-site to raise band gap is more ideal as it improves both VOC and photostability. We develop band gap maps and design criteria for the selection of perovskite compositions within the CsxFA1–xPb(BryI1–y)3, space. With this, we identify perovskites with tandem-relevant band gaps of 1.68 and 1.75 eV that demonstrate high device efficiencies of 17.4 and 16.3%, respectively, and significantly improved photostability compared to that of the higher Br-co...

Funder: European Research Council; Id: http://dx.doi.org/10.13039/501100000781, Funder: Engineering and Physical Sciences Research Council; Id: http://dx.doi.org/10.13039/501100000266, Funder: European Union's Horizon 2020, Radiation‐resistant but cost‐efficient, flexible, and ultralight solar sheets with high specific power (W g−1) are the “holy grail” of the new space revolution, powering private space exploration, low‐cost missions, and future habitats on Moon and Mars. Herein, this study investigates an all‐perovskite tandem photovoltaic (PV) technology that uses an ultrathin active layer (1.56 µm) but offers high power conversion efficiency, and discusses its potential for high‐specific‐power applications. This study demonstrates that all‐perovskite tandems possess a high tolerance to the harsh radiation environment in space. The tests under 68 MeV proton irradiation show negligible degradation (22%. Using high spatial resolution photoluminescence (PL) microscopy, it is revealed that defect clusters in GaAs are responsible for the degradation of current space‐PV. By contrast, negligible reduction in PL of the individual perovskite subcells even after the highest dose studied is observed. Studying the intensity‐dependent PL of bare low‐gap and high‐gap perovskite absorbers, it is shown that the VOC, fill factor, and efficiency potentials remain identically high after irradiation. Radiation damage of all‐perovskite tandems thus has a fundamentally different origin to traditional space PV.

International audience; Grain size in polycrystalline halide perovskite films is known to have an impact on the optoelectronic properties of the films, but its influence on their soft structural properties and phase transitions is unclear. Here, temperature-dependent X-ray diffraction, absorption, and macro- and micro-photoluminescence measurements are used to investigate the tetragonal to orthorhombic phase transition in thin methylammonium lead iodide films with grain sizes ranging from the micrometer scale down to the tens of nanometer scale. It is shown that the phase transition nominally at approximate to 150 K is increasingly suppressed with decreasing grain size and, in the smallest grains, the first evidence of a phase transition is only seen at temperatures as low as approximate to 80 K. With decreasing grain size, an increasing magnitude of the hysteresis is also seen in the structural and optoelectronic properties when cooling to, and then upon heating from, 100 K. This work reveals the remarkable sensitivity of the optoelectronic, physical, and phase properties to the local environment of the perovskite structure, which will have large ramifications for phase and defect engineering in operating devices.

Halide perovskites are a versatile class of semiconductors employed for high performance emerging optoelectronic devices, including flexoelectric systems, yet the influence of their ionic nature on their mechanical behavior is still to be understood. Here, a combination of atomic‐force, optical, and compositional X‐ray microscopy techniques is employed to shed light on the mechanical properties of halide perovskite films at the nanoscale. Mechanical domains within and between morphological grains, enclosed by mechanical boundaries of higher Young's Modulus (YM) than the bulk parent material, are revealed. These mechanical boundaries are associated with the presence of bromide‐rich clusters as visualized by nano‐X‐ray fluorescence mapping. Stiffer regions are specifically selectively modified upon light soaking the sample, resulting in an overall homogenization of the mechanical properties toward the bulk YM. This behavior is attributed to light‐induced ion migration processes that homogenize the local chemical distribution, which is accompanied by photobrightening of the photoluminescence within the same region. This work highlights critical links between mechanical, chemical, and optoelectronic characteristics in this family of perovskites, and demonstrates the potential of combinational imaging studies to understand and design halide perovskite films for emerging applications such as photoflexoelectricity.

© 2020 Wiley-VCH GmbH In influencing fundamental properties—and ultimately device performance—of lead halide perovskites, interfacial interactions play a major role, notably with regard to carrier diffusion and recombination. Here anodized porous Si (pSi) as well as porous silica particles are employed as templates for formation of methylammonium lead trihalide nanostructures. This allows synthesis of relatively small perovskite domains and comparison of associated interfacial chemistry between as-prepared hydrophobic hydrideterminated functionalities and hydrophilic oxide-terminated surfaces. While physical confinement of MAPbBr3 has a uniform effect on carrier lifetime, pore size (7–18 nm) of the silicon-containing template has a sensitive influence on perovskite photoluminescence (PL) wavelength maximum. Furthermore, identity of the surface functionality of the template significantly alters the PL quantum efficiency, with lowest PL intensity associated with the H-terminated pSi and the most intense PL affiliated with the oxideterminated pSi surface. These effects are explored for green-emitting MAPbBr3 as well as infrared-emitting MAPbI3. In addition, the role of silicon surface chemistry on the time-dependent stability of these perovskites packaged within a given mesoporous template is also evaluated, specifically, a lack of miscibility between MAPbI3 and the H-terminated pSi template results in a diffusion of this specific perovskite composition eluting from this porous matrix over time.

Metal halide perovskites are promising candidates for the wide band gap top cell in tandem solar cells. By introducing a tin oxide buffer layer via atomic layer deposition, we have improved the efficiency of monolithic, two-terminal, perovskite/silicon tandems to 23.6% by combining an infraredtuned silicon heterojunction bottom cell with the more stable cesium formamidinium lead halide perovskite. We show that further improvements to current and voltage can be made by introducing a PDMS scattering layer to reduce front surface reflection and using compositional engineering to simultaneously increase bandgap and Voc, while mitigating voltage losses arising from photo-induced halide segregation.

Methylammonium lead iodide perovskite (MAPbI3) exhibits long charge carrier lifetimes that are linked to its high efficiency in solar cells. Yet, the mechanisms governing these unusual carrier dynamics are not completely understood. A leading hypothesis—disproved in this work—is that a large, static bulk Rashba effect slows down carrier recombination. Here, using second harmonic generation rotational anisotropy measurements on MAPbI3 crystals, we demonstrate that the bulk structure of tetragonal MAPbI3 is centrosymmetric with I4/mcm space group. Our calculations show that a significant Rashba splitting in the bandstructure requires a non-centrosymmetric lead iodide framework, and that incorrect structural relaxations are responsible for the previously predicted large Rashba effect. The small Rashba splitting allows us to compute effective masses in excellent agreement with experiment. Our findings rule out the presence of a large static Rashba effect in bulk MAPbI3, and our measurements find no evidence of dynamic Rashba effects., The high performance of hybrid perovskite solar cells has attracted significant attention but the nature of the underlying mechanisms remains unclear. Frohna et al. show methylammonium lead iodide perovskite is centrosymmetric, invalidating previous predictions of a large bulk Rashba effect.

Mixed-halide lead perovskites have attracted significant attention in the field of photovoltaics and other optoelectronic applications due to their promising bandgap tunability and device performance. Here, the changes in photoluminescence and photoconductance of solution-processed triple-cation mixed-halide (Cs0.06MA0.15FA0.79)Pb(Br0.4I0.6)3 perovskite films (MA: methylammonium, FA: formamidinium) are studied under solar-equivalent illumination. It is found that the illumination leads to localized surface sites of iodide-rich perovskite intermixed with passivating PbI2 material. Time- and spectrally resolved photoluminescence measurements reveal that photoexcited charges efficiently transfer to the passivated iodide-rich perovskite surface layer, leading to high local carrier densities on these sites. The carriers on this surface layer therefore recombine with a high radiative efficiency, with the photoluminescence quantum efficiency of the film under solar excitation densities increasing from 3% to over 45%. At higher excitation densities, nonradiative Auger recombination starts to dominate due to the extremely high concentration of charges on the surface layer. This work reveals new insight into phase segregation of mixed-halide mixed-cation perovskites, as well as routes to highly luminescent films by controlling charge density and transfer in novel device structures.

Metal halide perovskites have emerged as exceptional semiconductors for optoelectronic applications. Substitution of the monovalent cations has advanced luminescence yields and device efficiencies. Here, we control the cation alloying to enhance optoelectronic performance through alteration of the charge carrier dynamics in mixed-halide perovskites. In contrast to single-halide perovskites, we find high luminescence yields for photoexcited carrier densities far below solar illumination conditions. Using time-resolved spectroscopy we show that the charge carrier recombination regime changes from second to first order within the first tens of nanoseconds after excitation. Supported by microscale mapping of the optical bandgap, electrically gated transport measurements and first-principles calculations, we demonstrate that spatially varying energetic disorder in the electronic states causes local charge accumulation, creating p- and n-type photodoped regions, which unearths a strategy for efficient light emission at low charge-injection in solar cells and light-emitting diodes. Localized photodoping in mixed-cation perovskites is shown to modify charge-carrier recombination and thus offer a route for more efficient light emission.

Quantum-confined CsPbBr3 nanoplatelets (NPLs) are extremely promising for use in low-cost blue light-emitting diodes, but their tendency to coalesce in both solution and film form, particularly under operating device conditions with injected charge-carriers, is hindering their adoption. We show that employing a short hexyl-phosphonate ligand (C6H15O3P) in a heat-up colloidal approach for pure, blue-emitting quantum-confined CsPbBr3 NPLs significantly suppresses these coalescence phenomena compared to particles capped with the typical oleyammonium ligands. The phosphonate-passivated NPL thin films exhibit photoluminescence quantum yields of ∼40% at 450 nm with exceptional ambient and thermal stability. The color purity is preserved even under continuous photoexcitation of carriers equivalent to LED current densities of ∼3.5 A/cm2. 13C, 133Cs, and 31P solid-state MAS NMR reveal the presence of phosphonate on the surface. Density functional theory calculations suggest that the enhanced stability is due to the stronger binding affinity of the phosphonate ligand compared to the ammonium ligand.