Search

We present a spectroscopic study of the structure of two peptides deposited on Au and TiO2: – PeptA, (EAK16-RGD) bringing the adhesive RGD sequence linked to EAK16; – PeptB, having RGD linked to a “scrambled” sequence of the EAK16 peptide. Previously reported NEXAFS investigations on thin films of the self-assembling peptide EAK16 deposited on Au and TiO2, revealed molecular order and orientation for both substrates. IR spectra show a β-sheet conformation for PeptA and a random structure for PeptB. Angular-dependent NEXAFS measurements reveal an ordered structure with preferential molecular orientation only for PeptA. XPS analysis indicates that PeptA is adsorbed on TiO2 in a larger amount than PeptB.

A properly engineered biomaterial for dental/orthopaedic applications must induce specific responses from the osteoblasts at the implant site. A most desirable response is an efficient adhesion, as it represents the first phase in the cell/material interaction and the quality of this phase will influence the cell's capacity to organize into a new functional tissue. The four osteoblast-adhesive peptides discussed in this paper are mapped on the 339–364 sequence (339MAPRPSLAKKQRFRHRNRKGYRSQRG364) located in the primary heparin-binding site of human vitronectin (HVP). Adsorbed on a polystyrene scaffold, these peptides display different adhesive activities towards osteoblasts. In this paper we report on the structural analysis in solution of the peptides through NMR and computational techniques. We find that the peptides with the highest adhesive activities display a hydrophobic patch opposite to the charged surface candidate to interact with heparin. These findings suggest that the peptides might adsorb on the polystyrene support in a favourable orientation for their activity. Furthermore, molecular models obtained for the four peptides in solution were used in rigid docking simulations with a heparin model. Assuming that the peptide solution conformations are not very different from the polystyrene-adsorbed structures, the simulations reveal that peptide adhesive activity is also affected by the number of ionic interactions and spacing between charged residues.

A fundamental goal in the field of implantology is the design of innovative devices suitable foil promoting, implant-to-tissue integration. This result can be achieved by means of surface modifications aimed at optimizing tissue regeneration. In the framework of oral and orthopedic implantology, surface modifications concern both the optimization of titanium/titanium alloy surface roughness and the attachment of biochemical factors able to guide cellular adhesion and/or growth. This article focuses on the covalent attachment of two different adhesive peptides to rough titanium disks. The capability of biomimetic surfaces to increase osteoblast adhesion and the specificity of their biological activity due to the presence of cell adhesion signal-motif have also been investigated. In addition, surface analyses by profilometry, X-ray photoelectron spectroscopy, and time of flight-secondary ion mass spectrometry have been carried out to investigate the effects and modifications induced by grafting procedures.

Bioactive molecules have been proposed to promote beneficial interactions at bone-implant interfaces for enhancing integration. The main objective of this study was to develop novel methods to functionalize oxidized titanium surfaces by the covalent immobilization of bioactive peptides, through selective reaction involving single functional groups. In the first protocol, an aminoalkylsilane was covalently linked to the Ti oxide layer, followed by covalent binding of glutaric anhydride to the free NH(2) groups. The carboxylic group Of glutaric anhydride was used to condense the free N-terminal group of the side-chain protected peptide sequence. Finally, the Surface was treated with trifluoroacetic acid to deprotect side-chain groups. In the second protocol, the peptide was directly anchored to the Ti oxide surface via UV activation of an arylazide peptide analogue. X-ray photoelectron spectroscopy analyses confirmed that modifications induced onto surface composition were in agreement with the reactions performed. The peptide density of each biomimetic Surface was determined on the basis of radiolabeling and XPS derived reaction yields. The in vitro cellular response of the biomimetic surfaces was evaluated using a primary human osteoblast cell model. Cell adhesion, proliferation, differentiation, and mineralization were examined at initial-, short-, and long-time periods. In was shown that the biomimetic surface obtained through photoprobe-marked analogue that combines an easily-performed modification provides a favorable surface for an enhanced cellular response.

Peptides consisting of an alternation of hydrophobic and hydrophilic (positively and negatively charged) amino acids can generate extended ordered structures by self-assembling (SA) from aqueous solutions. In this paper we present XPS, near-edge X-ray absorption fine structure (NEXAFS) and Fourier transform infrared (FTIR) investigations on a series of SA peptides with the aim of determining the effect of side-chain length on molecular arrangement and orientation. Peptides were immobilised on the surface of titanium, a well-known biocompatible material, or deposited as thick films on inert gold surfaces. FTIR analysis yields information on the backbone conformation. XPS spectroscopy was used to investigate the peptide adsorption on the TiO 2 surface. The orientation of the peptide chains was investigated by angular-dependent NEXAFS.

The covalent attachment of an adhesive peptide, reproducing the 351–359 sequence of human vitronectin, to oxidized titanium surfaces was investigated by XPS spectroscopy. The peptide enhances osteoblast adhesion to titanium, the most used biomaterial for implants and prostheses. Core level spectra of the TiO2 surface and of the biomimetic surface were investigated. Novel selective covalent immobilization of (351–359) HVP was carried out by treatment of the TiO2 surface with (3-aminopropyl) triethoxysilane, glutaric anhydride and a side chain protected peptide sequence presenting only a free terminal amino group, followed by side chain deprotection. An alternative strategy for covalent attachment consists in photoactivation of physisorbed (351–359) HVP directly on the TiO2 surface; samples were incubated with HVP solution and subsequently irradiated with UV light. A comparison with the results previously obtained for non-selective HVP immobilization will be discussed.

EAK16 is a 16 amino acid peptide consisting of an alternation of polar and non-polar pending groups and of positively and negatively charged residues, that makes this material capable of self-assembling, producing an extended ordered structure. Thin films of EAK16 were prepared on TiO2, and An surfaces and investigated by surface-sensitive techniques such as XPS (X-ray photoelectron spectroscopy), NEXAFS (near edge X-ray absorption fine structure) and IR spectroscopies. XPS analysis allowed to check the chemical structure of the samples and to determine the film thickness. IR experiments yielded evidence of the beta-sheet conformation of the peptide backbone. Polarization dependent NEXAFS measurements allowed estimating the angle between the axis of the peptide backbone and the sample surface. (c) 2005 Elsevier B.V. All rights reserved.

The quality of the early cell/material interactions is responsible for the long-term functional properties of any implanted device. Accordingly, "next generation" dental/orthopedic biomaterials should be able to promote osteoblast adhesion thus improving the integration process between surgically placed implants and biological tissues. Recent studies have identified a wide range of biochemical signals that can be exploited to promote adhesion, migration, proliferation and differentiation of cells. The clinical use of natural factors to promote osteoblast adhesion is complicated because those are often insoluble and unstable macromolecules and, in addition, it is difficult to obtain them in high quantities, with good purity grade and at low cost. A valid alternative could be the use of short peptides carrying the minimum active sequence of the natural macromolecular factor. This paper describes the properties of two classes of peptides, promoting different adhesion mechanisms, to enhance rat bone marrow osteoblast adhesion both to polystyrene and to acellular bone matrix.

Next generation dental/orthopedic biomaterials must be designed to enhance and support osteoblast adhesion. The osteoblasts use different ways to adhere, that is, integrin- and proteoglycan-mediated mechanisms. The present study reports on the synthesis and osteoblast-adhesive properties of peptides carrying RGD motifs and of sequences mapped on human vitronectin. Our data suggest that osteoblast adhesion on polystyrene plates modified with a linear peptide, in which the GRGDSP sequence is repeated four times, was significantly higher when compared to the adhesion obtained using branched peptides, interestingly containing the same motif. Osteoblast adhesion assays on acellular bone matrix using this active peptide gave very promising results. We also demonstrated that a novel peptide, carrying the X-B-B-B-X-B-B-X motif (where B is a basic amino acid and X is a nonbasic residue), promotes proteoglycan-mediated osteoblast adhesion more efficiently with respect to the KRSR sequence that was recently proposed as heparan-sulfate binding peptide.