Search

Transition metal selenides have attracted enormous research attention as anodes for lithium-ion batteries (LIBs) due to their high theoretical specific capacities. Nevertheless, the low electronic conductivity and dramatic volume variation in electrochemical reaction processes result in rapid capacity fading and poor rate capability. Herein, a metal–organic framework is used as a template to in situ synthesize Sb2Se3 nanoparticles encapsulated in N-doped carbon nanotubes (N-CNTs) grafted on reduced graphene oxide (rGO) nanosheets. The synergistic effects of N-doped carbon nanotubes and reduced graphene oxide nanosheets are beneficial for providing good electrical conductivity and maintaining the structural stability of electrode materials, leading to stable cycling performance and superior rate performance. Kinetic analysis suggests that the electrochemical reaction kinetics is dominated by pseudocapacitive contribution. Notably, a high discharge capacity of 451.1 mA h g−1 at a current density of 2.0 A g−1 is delivered after 450 cycles. Even at a high current density of 10.0 A g−1, a discharge capacity of 192.6 mA h g−1 is maintained after 10 000 cycles. When coupled with a commercial LiFePO4 cathode, the full batteries show an excellent discharge specific capacity of 534.5 mA h g−1 at 0.2 A g−1. This work provides an effective strategy for constructing high-performance anodes for Li+ storage.

Developing the highly efficient and low-cost electrocatalysts for the oxygen evolution reactions (OERs), as vital half reactions of water splitting, is crucial for renewable energy technology. The electrocatalysts based on multi-component and hierarchically structured non-noble metal hydr(oxy)oxide materials are of great prospects. Herein, we report an efficient strategy at low temperatures for synthesizing amorphous iron-doped cobalt-molybdenum ultrathin hydroxide (Fe-CoMo UH) nanosheets. Benefiting from the ultrathin amorphous structure and multi-metal coordination, Fe-CoMo UH nanosheets exhibit outstanding performance for OERs with a low overpotential of 245 mV at 10 mA cm−2, a small Tafel slope of 37 mV dec−1 and an excellent stability for 90 h. The mass activity of Fe-CoMo UH is higher than that of commercial Ir/C and most of the transition metal hydroxide catalysts. This work provides a feasible consideration for the construction of promising efficient non-noble metal catalysts.

Metallic sulfides have emerged as highly active, durable, and robust electrocatalysts for the electrocatalytic hydrogen evolution reaction (HER) due to their intriguing electronic and catalytic properties. One of the important strategies to further enhance their HER performance is to build multimetallic nanostructures by tuning the electronic state. Here we combine multimetallic structures and metal sulfides, and report an efficient strategy for the in situ surface-derivation of molybdenum sulfide nanosheets (MoS2 NSs) on Ag–Pd–Mo alloy nanowires (AgPdMo NWs) to form AgPdMo/MoS2 NWs. The heterostructure incorporates AgPdMo NWs with high conductivity and MoS2 NSs with abundant active sites, which act synergistically in alkaline solution. The as-tuned AgPdMo/MoS2 NWs exhibit Pt-like electrocatalytic performance for the HER, with a small overpotential of 54 mV at a current density of 10 mA cm−2 and a low Tafel slope of 72 mV dec−1. The present work demonstrates a potential strategy for designing heterostructures with multimetallic composition by in situ surface-derivation with enhanced performance in water splitting.

Over the past decades, metal selenides have drawn considerable attention due to their high theoretical specific capacity. However, huge volume changes and sluggish electrochemical transfer kinetics hinder their applications in energy storage and conversion. In this work, we demonstrate an efficient and ingenious synthesis strategy to regulate nickel selenide electrodes by the introduction of copper and in situ coating with carbon (Cu-NiSe2@C). When used as anodes for lithium-ion batteries, the as-synthesized Cu-NiSe2@C delivered a high capacity of 1630 mA h g−1 at 1.0 A g−1 after 200 cycles and excellent rate performance as well as long-term cycling stability with a high capacity of 489 mA h g−1 at 10 A g−1 after 20 000 cycles. When coupled with a commercial LiFePO4 cathode, the full cells showed a high capacity of 463 mA h g−1 at 0.2 A g−1. Their superior electrochemical performance can be attributed to the synergistic effect of the in situ carbon coating and copper doping, which can promote the electron/ion transfer kinetics, as well as alleviate the volume expansion during cycling. This work will open new opportunities for the development of high-performance anodes for lithium storage.

Molybdenum selenide is a potential alternative to counter electrode of a platinum-free dye-sensitized solar cell (DSSC). In this work, an in situ magnetron sputtering method is developed to prepare MoSe2 electrodes. The MoSe2 electrodes obtained at various temperatures from 300 and 550 °C are used as counter electrode for a dye-sensitized solar cell. Photovoltaic measurement results indicate that the MoSe2 electrodes prepared at 400 °C has the optimized performance, and the corresponding DSSCs provide an energy conversion efficiency of 6.83% which is comparable than that of the reference DSSC with platinum as counter electrode (6.51%). With further increas-ing the preparation temperature of the MoSe2 electrodes, the corresponding DSSCs decrease gradu-ally to 5.96% for 550 °C. Electrochemical impedance spectra (EIS) reveal that charge transfer resis-tance (Rct) of MoSe2 electrodes is rising with increase of the temperature from 400 to 500 °C, sug-gesting a downward electrocatalytic activity. Though the MoSe2 electrode prepared at 550 °C show a reduced Rct, its series resistance (Rs) and diffusion resistance (Zw) increase obviously. Considering that MoSe2 phase cannot be formed at 300 °C, it can be concluded that the prepared temperature as low as possible is favored for its final electrochemical performance. The results are very significant for developing low-cost and responsible counter electrodes for dye-sensitized solar cells

One-dimensional multimetallic nanotubes with mesoporous walls are promising electrocatalysts for fuel cells on account of their distinct morphology and tunable composition. In the present work, we ...

The rational-design and synthesis of transition-metal compounds with outstanding electrochemical activity and durability for renewable energy systems have attracted tremendous research interest in recent years. Herein, we report a facile and unique strategy to synthesize N-doped carbon nanotube-encapsulated Ni nanoparticles on reduced graphene oxide (Ni@NC-rGO). The optimized nanostructure determines the synergetic effects among the Ni nanoparticles, N-doped CNTs and graphene nanosheets, thus resulting in extraordinary electrochemical performances. When applied as an anode for lithium-ion batteries (LIBs), the Ni@NC-rGO electrode displayed high reversible capacity, stable cycling performance and superior rate capability. Moreover, the resulting Ni@NC-rGO nanocomposites exhibited low overpotential and considerable durability for the hydrogen evolution reaction (HER). Our study may provide a feasible methodology for the preparation of high-performance nanostructured materials for practical energy storage and conversion applications.

The development of high-efficiency nonprecious electrocatalysts based on inexpensive and Earth abundant elements is of great significance for renewable energy technologies. Group VIII transition metal phosphides (TMPs) gradually stand out due to their intriguing properties including low resistance and superior catalytic activity and stability. Herein, we adopt a unique MOF-derived strategy to synthesize transition metal phosphide nanoboxes which can be employed as electrocatalysts for the hydrogen evolution reaction. During this process, we converted a Co-MOF to a CoNi-MOF by ion exchange and low-temperature phosphating to achieve CoNiP nanoboxes. The CoNiP nanoboxes can reach a current density of 10 mA cm-2 at a low overpotential of 138 mV with a small Tafel slope of 65 mV dec-1.

Metal-organic frameworks (MOFs)-derived catalysts exhibit highly-efficient hydrogen or oxygen evolution performance on water splitting. However, it is an urgent problem to construct bifunctional electrocatalysts for both hydrogen and oxygen evolution performance. Herein, we adopted Ag nanowires as templates to prepare one-dimensional Ag nanowire@ZIF-8@ZIF-67 precursors (1D AgNW@ZIF-8@ZIF-67). Through pyrolysis, AgNW@ZIF-8@ZIF-67 precursors transformed into nitrogen-doped carbon frameworks (NCF) embedded with zinc-cobalt (ZnCo) nanoparticles on the surface of Ag NWs (denoted as Ag@ZnCo/NCF nanohybrids). The nanohybrids were consisted of Ag NWs with good conductivity and ZnCo/NCF nanohybrids with rich accessible active sites. Benefiting from their large specific surface area, accessible active sites and synergistic effect among components, Ag@ZnCo/NCF nanohybrids exhibit lower overpotentials of 139 mV and 279 mV at the current density of 10 mA cm−2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline solution, severally. Compared with other catalysts, Ag@ZnCo/NCF nanohybrids possess smaller Tafel slope, indicating their higher catalytic activity. This work provides a new perspective for designing low-cost and highly efficient bifunctional electrocatalysts for overall water splitting.

In this manuscript, we utilize a facile and efficient step-by-step strategy to synthesize three-layered C@TiO2@MoS2 hierarchical nanocomposites. These novel hybrids serve as anode materials in lithium-ion batteries (LIBs). The designed structure, in which MoS2 nanosheets are uniformly grown on TiO2 coated carbon hollow spheres, can enhance the electrical conductivity of electrodes, shorten the diffusion length of Li+ ions, alleviate the expansion of electrode materials and provide more active sites for lithium ion storage. As anode materials for lithium-ion batteries (LIBs), the C@TiO2@MoS2 hierarchical nanocomposites exhibit a high initial specific capacity (1687 mA h g-1) and good cycling performance (993.2 mA h g-1 after 100 cycles at a current density of 0.2 A g-1). Furthermore, the C@TiO2@MoS2 electrode exhibits high rate capacities of 963, 860, 806, 743, 703, 664 and 633 mA h g-1 at different current densities of 200, 500, 1000, 2000, 3000, 4000 and 5000 mA h g-1, respectively. The electrochemical performances stated above prove that the as-prepared C@TiO2@MoS2 nanocomposites can be promising anode materials for high-performance lithium-ion batteries.

Worm-like nanowires are among the most active nanomaterials. In this study, we report the synthesis of dibenzylamine (DBA) motifs from reductive amination of either aldehydes or nitriles catalyzed by entirely new worm-like PtMo nanowires (PtMo WNWs). Under the assistance of H2 gas, PtMo WNWs can be prepared in a facile manner, following which, their structure and composition are characterized by TEM, XRD, XPS, etc. Upon careful optimization of reaction parameters, the as-prepared PtMo WNWs work effectively in the activation of dihydrogen molecules, and both aldehydes and nitriles can be used as starting materials to fabricate DBAs under mild and green conditions. The reaction kinetics has been investigated, which reveals that the PtMo WNWs show superior activity in the conversion of imines into amines. This study provides a practical advancement in the preparation of amines. Moreover, the protocol reported herein is feasible for the synthesis of worm-like nanostructures with designed composition for various catalytic applications.

Carbon nitride (CNx) films supported on fluorine-doped tin oxide (FTO) glass are prepared by radio frequency magnetron sputtering, in which the film thicknesses are 90â100 nm, and the element components in the CNx films are in the range of x = 0.15â0.25. The as-prepared CNx is for the first time used as counter electrode for dye-sensitized solar cells (DSSCs), and show a preparation-temperature dependent electrochemical performance. X-ray photoelectron spectroscopy (XPS) demonstrates that there is a higher proportion of sp2 Cî…C and sp3 Cî¸N hybridized bonds in CNx-500 (the sample treated at 500 °C) than in CNx-RT (the sample without a heat treatment). It is proposed that the sp2 Cî…C and sp3 CâN hybridized bonds in the CNx films are helpful for improving the electrocatalytic activities in DSSCs. Meanwhile, Raman spectra also prove that CNx-500 has a relatively high graphitization level that means an increasing electrical conductivity. This further explains why the sample after the heat treatment has a higher electrochemical performance in DSSCs. In addition, the as-prepared CNx counter electrodes have a good light transmittance in the visible light region. The results are meaningful for developing low-cost metal-free transparent counter electrodes for DSSCs. Keywords: Solar cells, Counter electrodes, Carbon nitride, Electrocatalysis, Magnetron sputtering

Herein, we have developed a facile and effective approach for synthesizing a novel kind of porous nitrogen-doped carbon-coated MnO nanosphere. The porous Mn2O3 nanospheres are initially obtained by the calcination treatment of a coordination self-assembled aggregation precursor (referred to as Mn(OAc)2-C-8). Then, MnO@N-doped carbon composites (MnO@NCs) are obtained by the calcination of the Mn2O3 nanospheres coated with polydopamine (Mn2O3@PDA). The MnO@NCs are evaluated as an anode for lithium ion batteries (LIBs), which exhibit high specific capacity, stable cycling performance (1096.6 mA h g−1 after 100 cycles at 100 mA g−1) and high coulombic efficiency (about 99% over 100 cycles). The unique structure design and synergistic effect not only settle the challenges of low conductivity and poor cycling stability of transition metal oxides but also resolve the imperfection of inferior specific capacity of traditional graphite materials. Importantly, it may provide a commendable conception for developing new-fashioned anode materials to improve the lithium storage capability and electrochemical performance.

Highlights Bimetallic oxides nanoparticles derived from metal–oleate complexes embedded in 3D graphene networks were fabricated by a facile and rational design approach. The unique porous architecture promotes charge transfer so as to enhance the reversible capacity. The synergetic effect between the 0D nanoparticles and 3D graphene networks plays an essential role in the superb electrochemical performance. Electronic supplementary material The online version of this article (10.1007/s40820-019-0247-3) contains supplementary material, which is available to authorized users., In this manuscript, we have demonstrated the delicate design and synthesis of bimetallic oxides nanoparticles derived from metal–oleate complex embedded in 3D graphene networks (MnO/CoMn2O4 ⊂ GN), as an anode material for lithium ion batteries. The novel synthesis of the MnO/CoMn2O4 ⊂ GN consists of thermal decomposition of metal–oleate complex containing cobalt and manganese metals and oleate ligand, forming bimetallic oxides nanoparticles, followed by a self-assembly route with reduced graphene oxides. The MnO/CoMn2O4 ⊂ GN composite, with a unique architecture of bimetallic oxides nanoparticles encapsulated in 3D graphene networks, rationally integrates several benefits including shortening the diffusion path of Li+ ions, improving electrical conductivity and mitigating volume variation during cycling. Studies show that the electrochemical reaction processes of MnO/CoMn2O4 ⊂ GN electrodes are dominated by the pseudocapacitive behavior, leading to fast Li+ charge/discharge reactions. As a result, the MnO/CoMn2O4 ⊂ GN manifests high initial specific capacity, stable cycling performance, and excellent rate capability. Electronic supplementary material The online version of this article (10.1007/s40820-019-0247-3) contains supplementary material, which is available to authorized users.

Developing stable, efficient and economical electrocatalytic materials is still challenging for hydrogen evolution reaction (HER). Hence, we develop a Pd/Ni bimetallic carbon electrocatalyst (Pd/Ni-NC) with outstanding electrocatalytic performance. The catalyst derived from Pd-doped Ni-MOF (Pd/Ni-MOF) has particles and needle-like carbon tubes on its surface and is similar in shape to setaria. Benefiting from the composition and the unique structure, Pd/Ni-NC shows excellent HER catalytic performance with 16 mV at 10 mA cm−2, superior to Pd or Ni single metal-carbon catalyst. Furthermore, it maintains stable catalytic activity under constant current for 25h. These results show the strategy that obtaining Pd and Ni bimetallic MOF by cation exchange and its corresponding bimetallic carbon material with setaria-shaped structure by calcination is powerful for high efficient HER performance.

Herein, we reported a facile route to fabricate carbon and Au treated TiO 2 mesoporous hollow spheres (MHTiO 2 @C–Au) as high performance anode materials for lithium ion batteries. The high porosity of the hollow spheres, together with the inner carbon supporting and superficial Au coating, enhanced the cycling stability and rate performance of the MHTiO 2 @C–Au electrode significantly. The MHTiO 2 @C–Au composite exhibits a high reversible specific capacity of 186.6 mA h g −1 after 200 cycles at the current density of 1.0C, superior rate performances of around 151.0 mA h g −1 at the current rate of 5.0C. The outstanding electrochemical property is attributed to the overall structural features of the MHTiO 2 @C–Au, which can not only shorten the diffusion path of lithium ions and electrons, but also improve the stability of the hollow structures during the lithium ion insertion and extraction process.

Tailoring the morphology of Pt nanocrystals (NCs) is of great concern for their enhancement in catalytic activity and durability. In this article, a novel synthetic strategy is developed to selectively prepare porous dendritic Pt NCs with different structures for oxygen reduction reaction (ORR) assisted by NH3 gas and halides (F−, Cl−, Br−). The NH3 gas plays critical roles on tuning the morphology. Previously, H2 and CO gas are reported to assist the shape control of metallic nanocrystals. This is the first demonstration that NH3 gas assists the Pt anisotropic growth. The halides also play important role in the synthetic strategy to regulate the formation of Pt NCs. As-made porous dendritic Pt NCs, especially when NH4F is used as a regulating reagent, show superior catalytic activity for ORR compared with commercial Pt/C catalyst and other previously reported Pt-based NCs.

An efficient near-infrared (NIR) dowmconversion (DC) has been demonstrated in the CaMoO4:Yb3+ phosphors. Very strong NIR emission around 998 nm from the 2F(7/2) --> 2F(5/2) transition of the Yb3+ has been observed under ultraviolet excitation. A similar broad excitation band due to the absorption of the host CaMoO4 has been recorded when the NIR emission of Yb3+ and the visible molybdate (MoO4(-2)) emission are monitored, which suggests an efficient energy transfer (ET) from the host to the Yb3+. The Yb3+ concentration-dependent luminescence properties and lifetimes of both the visible and NIR emissions have also been studied. The lifetime of the molybdate emission decreases rapidly with the increasing Yb3+ concentration, further verifying the efficient ET from the host to the Yb3+. Moreover, the low temperature measurements have also been carried out to investigate the ET mechanism in the phosphors. A cooperative energy transfer (CET) mechanism has been proposed to rationalize the DC effect. The newly studied CaMoO4:Yb3+ DC phosphors, which can convert the broadband emission of the MoO4(2-) into NIR emission of Yb3+ with a twofold increase in the photon number will have potential application in greatly enhancing the response of silicon-based solar cells with a relatively higher Yb3+ quenching concentration.

The past decade has been marked by a growing interest in the development and use of ecologically friendly dyes. In this paper, a novel non-azobenzene ligand, (Z)-4-amino-2-(4-carboxyphenyl)-5-(hydroxyimino)-2,5-dihydro-1H-imidazole 3-oxide, was synthesized by the reaction of 3,4-diaminoglyoxime with 4-formylbenzoic acid, and characterized by IR, 1H-NMR and MS. The values of the 1H-NMR spectral results were in harmony with previously reported (Z)-4-amino-5-(hydroxyimino)-2,5-dihydro-1H-imidazole 3-oxide derivatives. Its brown ferrous complex has been prepared conveniently and applied to dye silk fabric. From the IR spectra of the complex, the stretching vibration for the ring of imidazole was disappeared, and the C=N absorption was lower than that of the ligand, which indicated that the N,N-chelate coordination bond was formed and the participation of the C=N-OH group in metal coordination. The colour fastness values of the dyed silk fabric to light, washing and rubbing were measured. The washing fastness of dyed silk fabric can reach 4 grade or 4-5 grade; the rub fastness 3-5 grade; the light fastness 3 grade.

In this manuscript, we synthesize a porous three-dimensional anode material consisting of molybdenum dioxide nanodots anchored on nitrogen (N)/sulfur (S) co-doped reduced graphene oxide (GO) (3D MoO2/NP-NSG) through hydrothermal, lyophilization and thermal treatment. First, the NP-NSG is formed via hydrothermal treatment using graphene oxide, hydrogen peroxide (H2O2), and thiourea as the co-dopant for N and S, followed by calcination of the N/S co-doped GO in the presence of ammonium molybdate tetrahydrate to obtain the 3D MoO2/NP-NSG product. This novel material exhibits a series of out-bound electrochemical performances, such as superior conductivity, high specific capacity, and excellent stability. As an anode for lithium-ion batteries (LIBs), the MoO2/NP-NSG electrode has a high initial specific capacity (1376 mAh g-1), good cycling performance (1250 mAh g-1 after 100 cycles at a current density of 0.2 A g-1), and outstanding Coulombic efficiency (99% after 450 cycles at a current density of 1 A g-1). Remarkably, the MoO2/NP-NSG battery exhibits exceedingly good rate capacities of 1021, 965, 891, 760, 649, 500 and 425 mAh g-1 at different current densities of 200, 500, 1000, 2000, 3000, 4000 and 5000 mA g-1, respectively. The superb electrochemical performance is owed to the high porosity of the 3D architecture, the synergistic effect contribution from N and S co-doped in the reduced graphene oxide (rGO), and the uniform distribution of MoO2 nanodots on the rGO surface.

Bimetallic Pt@Ir zigzag nanocomplexes were successfully synthesized with a uniform morphology via the simple reduction of Ir(acac)3 on the surface of Pt nanorods. The novel Pt@Ir nanocomplexes exhibited good catalytic activity in hydrogenation reactions under mild conditions, such as the hydrogenation of nitroaromatic compounds. The highest yield of the obtained product achieved was ∼99.9% using H2 as the sole reductant.

The demand for clean and energy-efficient fuel cell systems requires electrocatalysts with greater activity and stability. Here, we report a facile wet-chemical approach for the synthesis of high-quality three-dimensional (3D) Pt/Pd bimetallic nanodendrites. The simple and unique process developed here used oleylamine as a reducing agent, and hydrogen gas to control the morphology. The as-prepared Pt/Pd nanodendrites were characterized by transmission electron microscopy, x-ray diffraction and energy dispersive x-ray spectroscopy, cyclic voltammetry, linear sweep voltammetry and chronoamperometry. The nanodendrites showed superior electrocatalytic activity (609.565 mA mg(-1) Pt) for the oxidation of methanol compared with Pt nanoparticle electrocatalysts. This method could provide a general approach for the morphology-controlled synthesis of bimetallic Pt-based nanocatalysts, which are promising materials for applications in fuel cells.

Aromatic azos were synthesized using unsupported ultra-thin platinum nanowires as catalysts under mild reaction conditions and the reaction mechanism was proposed.

A simple and scalable coordination-derived method for the synthesis of porous Co3O4 hollow nanospheres is described here. The initially formed coordination-driven self-assembled aggregates (CDSAAs) could act as the precursor followed by calcination treatment. Then the porous hollow Co3O4 nanospheres are obtained, in which the primary Co3O4 nanoparticles are inter-dispersed. When the nanospheres are used as anode materials for lithium storage, they show excellent coulombic efficiency, high lithium storage capacity and superior cycling performance. In view of the facile synthesis and excellent electrochemical performance obtained, this protocol to fabricate special porous hollow frameworks could be further extended to other metal oxides and is expected to improve the practicality of superior cycle life anode materials with large volume excursions for the development of the next generation of LIBs.

Highly-dispersed ultrafine platinum (Pt) nanoparticles supported on graphene sheets were successfully prepared. Various unsaturated compounds were reduced in excellent yields under mild conditions. Higher pressure (4 atm) accelerated the reaction rate, and complete hydrogenation products were obtained in ten minutes.

Aromatic hydrogenation to form cyclohexane derivatives is one of the most important steps in both the petrochemical industry, for clean diesel fuel generation, and the pharmaceutical industry, for safe drug synthesis. We report herein, pure ultra-thin Pt nanowire catalysts with no supporting matrix and their high activities towards the hydrogenation of aromatic compounds (>99% conversion, 1 MPa initial hydrogen pressure, 70 °C). The catalysts can also be recycled up to 40 times with no loss in activity.

We show the anisotropic selective growth of gold particles onto various nanomaterials to form heterodimers, tadpole-like and necklace-like hybrid structures via simple nucleation. The morphology of these hybrid nanostructures can be easily controlled. Necklace-like Pt–Au nanostructures demonstrated high stabilities as electrocatalysts for oxygen-reduction reaction.

A novel FePt@Cu nanowire catalyst was prepared by the reduction of Cu(acac)(2) on the surface of FePt nanowires, in oleylamine (OAm). This nanowire catalyst efficiently epoxidised stilbene in the presence of molecular oxygen, and the conversion and selectivity were maintained with repeated use of the catalyst, compared with recycled catalyst.