Search

Abstract: A mathematical model for structural behavior of timber columns under fire has been proposed. The semi-analytical study has been carried out for evaluating the load-carrying capacity of timber columns exposed to fire. Particular emphasis has been given to critical buckling loads. For this purpose, a parametric study has been performed by which the influence of slenderness ratio, load level, and water content on critical buckling loads of timber columns have been investigated. The results of this preliminary study showed that the present semi-analytical method is conservative compared to the two simplified calculation methods offered by Eurocode 5 if the transfer of water is neglected, while, on the other hand, the results agree well for a water content of 12%. Moreover, for higher water contents, the present semi-analytical model is non-conservative compared to the Eurocode 5 methods. [Copyright &y& Elsevier]

Abstract: To assess the long-term safety of a radioactive waste disposal system, mathematical models are used to describe groundwater flow, chemistry, and potential radionuclide migration through geological formations. A number of processes need to be considered, when predicting the movement of radionuclides through the geosphere. The most important input data are obtained from field measurements, which are not available for all regions of interest. For example, the hydraulic conductivity as an input parameter varies from place to place. In such cases, geostatistical science offers a variety of spatial estimation procedures. Methods for solving the solute transport equation can also be classified as Eulerian, Lagrangian and mixed. The numerical solution of partial differential equations (PDE) has usually been obtained by finite-difference methods (FDM), finite-element methods (FEM), or finite-volume methods (FVM). Kansa introduced the concept of solving partial differential equations using radial basis functions (RBF) for hyperbolic, parabolic, and elliptic PDEs. The aim of this study was to present a relatively new approach to the modeling of radionuclide migration through the geosphere using radial basis function methods in Eulerian and Lagrangian coordinates. In this study, we determine the average and standard deviation of radionuclide concentration with regard to variable hydraulic conductivity, which was modelled by a geostatistical approach. Radionuclide concentrations will also be calculated in heterogeneous and partly heterogeneous 2D porous media. [Copyright &y& Elsevier]

Abstract: A mathematical model for slip-buckling has been proposed and its analytical solution has been found for the analysis of layered and geometrically perfect composite columns with inter-layer slip between the layers. The analytical study has been carried out to evaluate exact critical forces and to compare them to those in the literature. Particular emphasis has been placed on the influence of interface compliance on decreasing the bifurcation loads. For this purpose, a preliminary parametric study has been performed by which the influence of various material and geometric parameters on buckling forces have been investigated. [Copyright &y& Elsevier]

Abstract: A new mathematical model and its finite element formulation for the non-linear analysis of mechanical behaviour of a two-layer timber planar beam is presented. A modified principle of virtual work is employed in formulating the finite element method. The basic unknowns are strains. The following assumptions are adopted in the mathematical model: materials are taken to be non-linear and can differ from layer to layer; interacting shear and normal contact tractions between layers are derived from the non-linear shear contact traction–slip and the non-linear normal contact traction–uplift characteristics of the connectors; the geometrically linear and materially non-linear Bernoulli’s beam theory is assumed for each layer. The formulation is found to be accurate, reliable and computationally effective. The suitability of the theory is validated by the comparison of the numerical solution and the experimental results of full-scale laboratory tests on a simply supported beam. An excellent agreement between measured and calculated results is observed for all load levels. The further objective of the paper is the analysis of the effect of different normal contact traction–uplift constitutive relationships on the kinematic and static quantities in a statically determined and undetermined structure. While the shear contact traction–slip constitutive relationship dictates the deformability of the composite beam and has a substantial influence on most of the static and kinematic quantities of the composite beam, a variable normal contact traction–uplift constitutive relationship is in most cases negligible. [Copyright &y& Elsevier]