Search

Long‐term reliability assessment of photovoltaic (PV) modules is key to ensuring the economic viability of PV systems. This paper presents a multi‐pronged performance degradation analysis of a 62.1 kWp solar PV power plant after 9.5 years of operation. For this purpose, various diagnosis techniques, namely, visual inspection, infrared thermography (IR), ultraviolet fluorescence (UVFL) and current‐voltage (I‐V) characterization, have been performed to evaluate the performance and degradation of the solar PV power plant. The visual characterization results show that the PV strings are affected by different mechanisms with different degrees of occurrences. The degradation mechanisms observed and the level of occurrence among the modules were found to be, encapsulant discolouration (100%), degraded frame adhesive (57%), degraded junction box adhesive (39%), snail trails (30%), burn marks (3%), cell cracks (2%) and delamination (0.4%). Although discolouration of the encapsulant was the most common possible degradation mechanism observed, the main causes of the power loss were snail trails and cracks in the PV cells. Furthermore, the IR thermography and UVFL analysis provided better understanding on snail trails phenomenon and crack mechanism on the affected PV modules. Besides imaging techniques, to assess the electrical performance of the system, we performed current‐voltage (I‐V) and power‐voltage (P‐V) characterization of the entire PV plant from which the degradation rates of the electrical parameters were determined. Our results show that the degradation rates for the maximum power and the fill factor are 0.84%/year and 0.66%/year, respectively, over the operating period of the installation. The estimated maximum power degradation rate for this installation could be considered as a realistic degradation rate for PV modules installed in harsh and hot desert climatic conditions. Additionally, our work has raised doubts about the validity of the warranties proposed by the manufacturers. [ABSTRACT FROM AUTHOR]

This paper proposes an Intelligent Monitoring System (IMS) for Photovoltaic (PV) systems using affordable and cost-efficient hardware and also lightweight software that is capable of being easily implemented in different locations and having the capability to be installed in different types of PV power plants. IMS uses the Internet of Things (IoT) platform for handling data as well as Interoperability and Communication among the devices and components in the IMS. Moreover, IMS includes a personal cloud server for computing and storing the acquired data of PV systems. The IMS also consists of a web monitor system via some open-source and lightweight software that displays the information to multiple users. The IMS uses deep ensemble models for fault detection and power prediction in PV systems. A remarkable ability of the IMS is the prediction of the output power of the PV system to increase energy yield and identify malfunctions in PV plants. To this end, a long short-term memory (LSTM) ensemble neural network is developed to predict the output power of PV systems under different environmental conditions. On the other hand, the IMS uses machine learning-based models to detect numerous faults in PV systems. The fault diagnostic of IMS is based on the following stages. Firstly, major features are elicited through an analysis of Current–Voltage (I–V) characteristic curve under different faulty and normal events. Second, an ensemble learning model including Naive Bayes (NB), K-Nearest Neighbors (KNN), and Support Vector Machine (SVM) is used for detecting and classifying fault events. To enhance the performance in the process of fault detection, a feature selection algorithm is also applied. A PV system has been designed and implemented for testing and validating the IMS under real conditions. IMS is an interoperable, scalable, and replicable solution for holistic monitoring of PV plant from data acquisition, storing, pre-and post-processing to malfunction and failure diagnosis, performance and energy yield assessment, and output power prediction. [ABSTRACT FROM AUTHOR]

Line–line (LL) and line-ground (LG) faults may not be detected by common protection devices in Photovoltaic (PV) arrays as these faults are not detectable under high fault impedance and low mismatch level. In recent years, many efforts have been devoted to overcome these challenges using intelligent methods. However, these methods could not classify the type of faults and diagnose their severity. In this article, we propose a novel and intelligent fault monitoring method to detect and classify LL and LG faults at the dc side of PV systems. For this purpose, the main features of current–voltage curves under different fault events and normal conditions are extracted. The faults are categorized using the hierarchical classification platform. Later, the LL and LG faults are detected and classified by machine learning methods. The proposed method aims to reduce the amount of dataset, which is required for the learning process, and also obtains a higher accuracy in detecting and classifying the fault events at low mismatch levels and high fault impedance compared with other fault diagnostic methods. The experimental results verify that the proposed method precisely detects and classifies LL and LG faults on PV systems under different conditions and severity with the accuracy of 96.66% and 91.66%, respectively. [ABSTRACT FROM AUTHOR]

This work proposes an automated reconfiguration system to manage two types of faults in any position inside the solar arrays. The faults studied are the short-circuit to ground and the open wires in the string. These faults were selected because they severely affect power production. By identifying the affected panels and isolating the faulty one, it is possible to recover part of the power loss. Among other types of faults that the system can detect and locate are: diode short-circuit, internal open-circuit, and the degradation of the internal parasitic serial resistance. The reconfiguration system can detect, locate the above faults, and switch the distributed commutators to recover most of the power loss. Moreover, the system can return automatically to the previous state when the fault has been repaired. A SIMULINK model has been built to prove this automatic system, and a simulated numerical experiment has been executed to test the system response to the faults mentioned. The results show that the recovery of power is more than 90%, and the diagnosis accuracy and sensitivity are both 100% for this numerical experiment. [ABSTRACT FROM AUTHOR]

Early detection of faults in photovoltaic (PV) systems is crucial for improving their lifespan and reliability. Conventional protection devices may not be able to detect electrical faults under critical conditions. This usually occurs due to (i) the current-limiting nature and non-linear output characteristics of PV arrays, (ii) the changing environmental conditions (such as irradiance and temperature variations), and (iii) the influence of the maximum power point tracker (MPPT), particularly in the presence of critical fault impedance values or mismatch levels. Therefore, modern data-driven methods are required for fault detection and classification in PV arrays. However, careful investigation in previous studies reveals the existing gaps and limitations, such as poor accuracy, and incomprehensive models which have not considered various electrical faults, low mismatch levels, and critical fault impedance values. To this end, in this study, a comprehensive multilayer model is proposed which consists of six layers for diagnosis, classification and severity identification of electrical faults in PV arrays. Each layer adopts a weighted ensemble learning (WEL) algorithm consisting of three classifiers namely Support Vector Machine (SVM), Naïve Bayes (NB) and Logistic Regression (LR). Besides, a genetic algorithm (GA) is employed in each layer to find the optimal weights for each classifier (i.e., SVM, NB and LR). The initial dataset is acquired through an investigation into the PV array current–voltage (I-V) characteristic curve and extraction of several features under various faulty and normal conditions. To reduce the dataset dimensionality thus computationally simplifying the training process, the sequential floating forward selection (SFFS) algorithm is utilized in each layer as a powerful feature selection technique. The results show a highly accurate performance in fault diagnosis, classification, and severity assessment, with an average simulation and experimental accuracies of 98.9% and 98.37%, respectively. [ABSTRACT FROM AUTHOR]