Search

Measuring the orientation, mass and body length of migratory insects through entomological radar is crucial for early warnings of migratory pests. The fully polarized entomological radar is an efficient device for observing migratory insects by calculating insect parameters through the scattering matrix obtained from the target. However, the measured target scattering matrix will be affected by system polarization measurement errors, leading to errors in insect parameter calculation, while the related analysis is currently relatively limited. Therefore, the scattering matrix measurement process is modeled, followed by an analysis of the effects of different errors on orientation, mass and body length estimation. The influence of polarization measurement errors on insect scattering characteristics is also analyzed. The results present that for fixed polarization measurement errors, the measurement errors of insect orientation, mass and body length will vary with insect orientation in specific patterns, and the distribution of measured insect parameters will be drastically distorted compared to the true parameter distribution. In addition, polarization measurement errors could seriously disrupt the reciprocity and bilateral symmetry of the measured insect scattering matrix. These analyses and conclusions provide a good basis for eliminating the effects of polarization measurement errors and improving the accuracy of insect parameter measurement. [ABSTRACT FROM AUTHOR]

Entomological radar is a specially designed instrument that can measure the behavioral and biological characteristics of high-altitude migrating insects. Its application is of great significance for the monitoring, early warning, and control of agricultural pests. As an important component of the local migratory biomass, insects fly in the air during the day and night. The fully polarimetric entomological radar was carefully designed with all-day, all-weather, and multi-function measurement capabilities. The fully polarimetric entomological radar measures the mass of a single insect based on the radar cross-sectional (RCS) measurement and then calculates the biomass of migrating insects. Therefore, the measurement accuracy of the insect RCS is the key indicator affecting the accuracy of migratory biomass statistics. Due to the radar's lack of in-beam angle measurement ability, the insect RCS is usually measured based on the assumption that the insect is on the beam center. Therefore, the measured RCS will be smaller than true value if the insect deviates from the beam center due to the gain curve of the antenna. This leads to measurement errors in regard to the insect mass and migratory biomass. In order to solve this problem, a biomass estimation method, reported in this paper, was designed under the assumption of a uniform distribution of migrating insects in the radar monitoring airspace. This method can estimate the individual RCS expectation of migrating insects through a statistical method without measuring the position of the insects in the beam and then obtain the migratory biomass. The effectiveness of the model and algorithm is verified by simulations and entomological radar field measurements. [ABSTRACT FROM AUTHOR]

Measuring migration flux with entomological radar is of great importance to assess the biomass of migratory insects and study the influence of insects on the ecosystem. However, the migration flux is measured with a large quantity of errors for the entomological radar without the ability of in-beam angle measurement, because the insect RCS is measured with the assumption that the insect flies over the beam center. When the insect does not pass through the beam center, the measured RCS is less than the true value. To improve the estimation accuracy of migration flux, a new estimation method of migration flux based on statistical hypothesis is proposed for radars working in the fixed-beam vertical-looking mode. This method avoids the RCS measurement error caused by the offset of the insect trajectory to the radar beam center by assuming that the insect flight trajectory is evenly distributed in the beam and calculating the average value of flux. This method is extended to be used in fixed-beam arbitrary pointing mode and a new proposed scanning mode. The effectiveness of the proposed method is verified by simulations and migration insect data measured by a radar. [ABSTRACT FROM AUTHOR]

For entomological radar, the polarization information of the target is usually used to estimate the biological parameters, such as orientation, body length, and mass, of the insect. Thus, the accuracy of polarization measurement directly affects the performance of the biological parameters' estimation. The polarization measurement error is mainly caused by the imbalance of amplitude and phase between two polarization channels and the crosstalk of the dual-polarization antenna. In order to obtain the correct polarization information of the target, the polarimetric calibration of the entomological radar is required. This paper proposes a new polarimetric calibration technique based on antenna rotation, which does not require the calibrator to have a specific polarization scattering matrix (PSM). Compared with the currently existing calibration techniques, no prior knowledge of the calibrator PSM is required (in fact, any fixed-point target can be used as a calibrator); thus, the errors introduced by the mechanical process can be avoided. Simulations and data measured by radar verify the effectiveness of the method. This method has the potential to be extended to other fully polarimetric radar systems in the future, such as fully polarimetric weather radar, fully polarimetric synthetic aperture radar (SAR), and so on. [ABSTRACT FROM AUTHOR]