Search

Food composite samples from the Canadian Total Diet Study which was conducted each year from 2008 to 2012 rotating between different cities were analysed for bisphenol A (BPA). The overall levels of BPA in the composite food samples from each of the five years from 2008 to 2012 were similar in general with averages (range) of 7.7 ng/g (0.20-106 ng/g), 7.8 ng/g (0.26-110 ng/g), 6.9 ng/g (0.20-84 ng/g), 7.7 ng/g (0.20-105 ng/g) and 9.0 ng/g (0.15-90 ng/g) for 2008, 2009, 2010, 2011 and 2012, respectively. Levels of BPA in most of the non-canned food composite samples were low and no particular trends were observed. In contrast, the trend of BPA levels in canned food composite samples over the five years (2008-2012) varies. BPA levels in most of the canned food composite samples from 2008 to 2012 were consistent in general (e.g. canned luncheon meat: 10-18 ng/g, canned baked beans: 18-25 ng/g). While BPA levels over the five years were found to decrease for some canned food composite samples (e.g., canned fish: 109 ng/g in 2009 vs. 51 ng/g in 2012), they were also found to increase for some other canned food composite samples (e.g. canned meat soups: 90-104 ng/g in 2011-2012 vs. 29 ng/g in 2008). Thus, recent changes in can coating for food packaging to BPA-free alternatives may have not been fully reflected in all canned food products over the period from 2008 to 2012. Continued monitoring is necessary to more fully assess the potential impact on dietary exposure by the use of BPA alternatives in food contact materials.

Because beef food products are generally cooked prior to consumption, the behavior of chemicals in these cooked foods is important in estimating human exposure. The heat stability of the natural estrogen β-estradiol (β-E2) and its metabolites α-estradiol (α-E2), estrone (E1), and several catechol estrogens was examined in heated vegetable oil and aqueous solutions. The chemicals were also incorporated into regular and extra lean ground beef and subjected to cooking. E1 and E2 were stable in aqueous solutions at 100°C, whereas the catechol estrogens exhibited first-order decay curves with half-lives of 2-10 min. Their stability improved to the same level as the other test chemicals when an antioxidant was added to the solution, suggesting that their disappearance was due to oxidation rather than thermal degradation. E1 and E2 were also stable in heated vegetable oil (160-180°C), whereas catechol estrogen decreased 30-50% over the 2 h duration of the experiments. Chemical losses from cooked beef appear to be related to the fat content of the beef, with greater losses occurring in regular ground beef (25-30%), compared to extra lean ground beef (5-20%). This study shows that cooking reduces but does not eliminate the potential for dietary exposure to growth promoters in ground beef.

In our previous study, bisphenol S (BPS) was detected unexpectedly and at high levels in meat samples from 2016 and 2020 Canadian total diet study (TDS). In this study, samples of meat and meat products from 2008–2015 and 2017–2019 TDS were also analysed to investigate the consistency of BPS occurrence in meat and identify possible trends and provide some information on the potential sources for BPS in meat. BPS was detected again with the highest levels observed in samples of fresh pork (105 ng/g) and veal cutlets (140 ng/g) from the 2008 TDS. This indicates that the occurrence of BPS in meat is not a recent phenomenon but rather an existing one since 2008 or even earlier. BPS concentrations in meat samples from the 2008 to 2020 TDS varied significantly, e.g. 1.2–118 ng/g in roast beef, 1.8–140 ng/g in veal cutlets, but no trend was observed. The lack of trend for BPS over the period of 13 years (2008–2020) does not support the speculation that BPS is being used to replace BPA in food packaging, and sources other than food packaging may be possible and should be investigated for BPS. [ABSTRACT FROM AUTHOR]

In this study, the occurrence of bisphenol S (BPS) in the meat and meat products from a recent Canadian Total Diet Study (TDS) was investigated in more detail. In addition to their composite samples, the individual raw meat and meat products were also analysed for BPS to investigate the variations of BPS levels and provide some information on the potential sources for BPS in meat. BPS was detected in all the 11 composite samples of different meat and meat products, with the highest level in roast beef (118.23 ng/g) and lowest in cured pork (0.14 ng/g) and cold cuts luncheon meats (0.18 ng/g). BPS was also detected in all the 84 individual raw meat and meat products, with the highest level of 257.61 ng/g in roast beef, followed by 190.41 ng/g in organ meats, 110.15 ng/g in beef steak, 27.91 ng/g in veal cutlets, 17.63 ng/g in wieners & sausages, and 15.27 ng/g in ground beef. However, significant variations of BPS levels were observed in the individual meat and meat product samples under the same category collected from different stores. This may indicate that packaging is unlikely the sources for BPS in meat otherwise BPS levels would have been more or less the same with the same type of packaging (Styrofoam and cling film) regardless where they were collected. Thus, sources other than food packaging, such as the contaminated feed and farming environment (e.g. grass) for animals (e.g. cow), may be possible and should be investigated in future studies. [ABSTRACT FROM AUTHOR]

AbstractAs an alternative to bisphenol A (BPA), bisphenol S (BPS) has been used as an ink developer in thermal paper products including price labels on food packaging which have been suggested as the sources of BPS found at high levels in packaged fish samples. BPS in the printed price labels glued onto the outside of plastic film could migrate indirectly from the printed surface through the paper, adhesive and film into the food. In order to investigate if price labels could also be the sources of BPS detected in the meat samples in our previous studies, meat and other food samples packaged under different conditions were collected, and BPS in these samples together with the price labels on the corresponding packaging were extracted with solvent followed by solid phase extraction and stable isotope dilution LC-MS/MS analysis. BPS was detected at very high levels (161.7–222.4 µg/cm2) in all the five sticker type of price labels, indicating BPS being the dominant if not the sole ink developer. BPS was also detected in all the 26 continuous roll type of price labels but at very low levels (0.017–18 ng/cm2), indicating that the dominant ink developer is likely one of the other alternatives, rather than BPS. Despite BPS being detected in all price labels on packaging of fish, meat, and cheese samples, BPS was not detected or detected in only a few fish, meat, and cheese samples at levels considerably lower than the current EU specific migration limit (SML) of 50 ng/g food for BPS authorised under Regulation (EU) 10/2011. [ABSTRACT FROM AUTHOR]

It is already known that bisphenol S (BPS) has been used as a substitute for BPA in thermal papers in recent years. It is not clear, however, if BPS has also been used to replace BPA in can coatings as currently being speculated due to a lack of credible studies on migration of BPS from can coatings and occurrence data of BPS in foods. In this study, an LC-MS/MS method was developed for the analysis of BPS, along with several other bisphenols, and method detection limits for BPS varied from 0.0017 to 3.1 ng/g depending on the type of sample matrix and the amount of sample analysed. This method was used to analyse 159 different food composite samples from a recent Canadian total diet study. Bisphenol E (BPE), bisphenol B (BPB), and bisphenol AF (BPAF) were not detected in any of the 159 food composite samples, bisphenol F (BPF) was detected in only three samples (25–2360 ng/g), and bisphenol A (BPA) was detected in 10 samples (5.3–41 ng/g) which were all prepared from canned foods. BPS was not detected in any of the canned food composite samples but was detected in nine food composite samples prepared from meat and meat products (1.2–35 ng/g), indicating sources for BPS other than can coatings may be possible, which will be investigated in future studies. [ABSTRACT FROM AUTHOR]