Search

This paper investigates the robustness against localized impacts of elastic spherical shells pre-loaded under uniform external pressure. We subjected a pre-loaded spherical shell that is clamped at its equator to axisymmetric blast-like impacts applied to its polar region. The resulting axisymmetric dynamic response is computed for increasing amplitudes of the blast. Both perfect shells and shells with axisymmetric geometric imperfections are analyzed. The impact energy threshold causing buckling is identified and compared with the energy barrier that exists between the buckled and unbuckled static equilibrium states of the energy landscape associated with the pre-loaded pressure. The extent to which the impact energy of the threshold blast exceeds the energy barrier depends on the details of its shape and width. Targeted blasts that approximately replicate the size and shape of the energy barrier buckling mode defined in the paper have an energy threshold that is only modestly larger than the energy barrier. An extensive study is carried out for more realistic Gaussian-shaped blasts revealing that the buckling threshold energy for these blasts is typically in the range of at least 10-40% above the energy barrier, depending on the pressure pre-load and the blast width. The energy discrepancy between the buckling threshold and energy barrier is due to elastic waves spreading outward from the impact and dissipation associated with the numerical integration scheme. Buckling is confined to the vicinity of the pole such that, if the shell is not shallow, the buckling thresholds are not strongly dependent on the location of the clamping boundary, as illustrated for a shell clamped halfway between the pole and the equator. [ABSTRACT FROM AUTHOR]

Dynamic buckling is addressed for complete elastic spherical shells subject to a rapidly applied step in external pressure. Insights from the perspective of nonlinear dynamics reveal essential mathematical features of the buckling phenomena. To capture the strong buckling imperfection-sensitivity, initial geometric imperfections in the form of an axisymmetric dimple at each pole are introduced. Dynamic buckling under the step pressure is related to the quasi-static buckling pressure. Both loadings produce catastrophic collapse of the shell for conditions in which the pressure is prescribed. Damping plays an important role in dynamic buckling because of the time-dependent nonlinear interaction among modes, particularly the interaction between the spherically symmetric 'breathing' mode and the buckling mode. In general, there is not a unique step pressure threshold separating responses associated with buckling from those that do not buckle. Instead, there exists a cascade of buckling thresholds, dependent on the damping and level of imperfection, separating pressures for which buckling occurs from those for which it does not occur. For shells with small and moderately small imperfections, the dynamic step buckling pressure can be substantially below the quasi-static buckling pressure. [ABSTRACT FROM AUTHOR]

The elastic buckling of shell structures such as spherical shells subject to external pressure and cylindrical shells loaded in axial compression is highly sensitive to imperfections and often catastrophic. Recent studies of spherical shells have provided accurate quantitative results for the relation between the buckling pressure and the amplitude and shape of geometric imperfections and, additionally, quantitative results for the energy barrier that must be overcome to buckle the shell by extraneous loadings or disturbances when it is loaded to pressures below the buckling pressure. Results for the simultaneous interaction of imperfections and energy barriers for spherical shells under external pressure will be presented. Numerical studies for probing forces illustrate their use in determining the buckling energy barrier, and new experimental results on energy barriers obtained by others by probing spherical shells will be discussed and compared with predictions. It will be argued that while imperfections determine the buckling load of a shell, the energy barrier at loads below the buckling load supplies important additional information about the relative safety or precariousness of the shell to additional disturbances. Results for the energy barrier for perfect and imperfect spherical shells under external pressure provide important insights into the shell's robustness, or lack thereof, at pressures below the buckling pressure. In particular, the energy barrier trends provide critical insights into the low knockdown factor usually employed in establishing the design load of unstiffened spherical and cylindrical shells. These design loads are shown to correlate with conventional predictions provided that imperfection amplitudes scale as the shell radius. [ABSTRACT FROM AUTHOR]

This paper addresses testing of compressed structures, such as shells, that exhibit catastrophic buckling and notorious imperfection sensitivity. The central concept is the probing of a loaded structural specimen by a controlled lateral displacement to gain quantitative insight into its buckling behavior and to measure the energy barrier against buckling. This can provide design information about a structure's stiffness and robustness against buckling in terms of energy and force landscapes. Developments in this area are relatively new but have proceeded rapidly with encouraging progress. Recent experimental tests on uniformly compressed spherical shells, and axially loaded cylinders, show excellent agreement with theoretical solutions. The probing technique could be a valuable experimental procedure for testing prototype structures, but before it can be used a range of potential problems must be examined and solved. The probing response is highly nonlinear and a variety of complications can occur. Here, we make a careful assessment of unexpected limit points and bifurcations, that could accompany probing, causing complications and possibly even collapse of a test specimen. First, a limit point in the probe displacement (associated with a cusp instability and fold) can result in dynamic buckling as probing progresses, as demonstrated in the buckling of a spherical shell under volume control. Second, various types of bifurcations which can occur on the probing path which result in the probing response becoming unstable are also discussed. To overcome these problems, we outline the extra controls over the entire structure that may be needed to stabilize the response. [ABSTRACT FROM AUTHOR]

Elastic spherical shells loaded under uniform pressure are subject to equal and opposite compressive probing forces at their poles to trigger and explore buckling. When the shells support external pressure, buckling is usually axisymmetric; the maximum probing force and the energy barrier the probe must overcome are determined. Applications of the probing forces under two different loading conditions, constant pressure or constant volume, are qualitatively different from one another and fully characterized. The effects of probe forces on both perfect shells and shells with axisymmetric dimple imperfections are studied. When the shells are subject to internal pressure, buckling occurs as a nonaxisymmetric bifurcation from the axisymmetric state in the shape of a mode with multiple circumferential waves concentrated in the vicinity of the probe. Exciting new experiments by others are briefly described. [ABSTRACT FROM AUTHOR]

The nonlinear axisymmetric post-buckling behaviour of perfect, thin, elastic spherical shells subject to external pressure and their asymmetric bifurcations are characterized, providing results for a structure/loading combination with an exceptionally nonlinear buckling response. Immediately after the onset of buckling, the buckling mode localizes into a dimple at the poles. The relations among the pressure, the dimple amplitude and the change in volume of the shell are determined over a large range of pole deflections. These results allow accurate evaluation of criteria such as the Maxwell condition for which the energies in the unbuckled and buckled states are the same and evaluation of the influences of pressure versus volume-controlled loadings. Nonaxisymmetric bifurcation from the axisymmetric state, which occurs deep into the post-buckling regime in the form of multi-lobed dimples, is also established and discussed. This article is part of the themed issue 'Patterning through instabilities in complex media: theory and applications.' [ABSTRACT FROM AUTHOR]

A study is presented of the post-buckling behaviour and imperfection sensitivity of complete spherical shells subject to uniform external pressure. The study builds on and extends the major contribution to spherical shell buckling by Koiter in the 1960s. Numerical results are presented for the axisymmetric large deflection behaviour of perfect spheres followed by an extensive analysis of the role axisymmetric imperfections play in reducing the buckling pressure. Several types of middle surface imperfections are considered including dimple-shaped undulations and sinusoidal-shaped equatorial undulations. Buckling occurs either as the attainment of amaximum pressure in the axisymmetric state or as a non-axisymmetric bifurcation from the axisymmetric state. Several new findings emerge: the abrupt mode localization that occurs immediately after the onset of buckling, the existence of an apparent lower limit to the buckling pressure for realistically large imperfections, and comparable reductions of the buckling pressure for dimple and sinusoidal equatorial imperfections. [ABSTRACT FROM AUTHOR]

Clamped-clamped compressed wide metal columns with length to thickness ratios such that they undergo plastic buckling are considered. Further, the thickness of the columns is assumed to be in the range of microns to tens of microns, typical of elements comprising some of the small-scale lattice materials currently being produced. The strengthening effects associated with plastic strain gradients are expected to influence buckling behavior, and the columns are analyzed using several versions of the available strain gradient plasticity theories. The columns are assumed to be infinitely wide and subject to plane strain deformations. Approximate one-dimensional and exact two-dimensional analyses are presented. The primary focus is the onset of plastic buckling as predicted by bifurcation from the state of uniform compression. However, a numerical post-buckling study is carried out for one class of strain gradient theories for columns with initial imperfections to ascertain if the buckling predictions stemming from this class of theory are realistic. The paper highlights the fact that one class of strain gradient theories does not appear to be adequate for analyzing plastic buckling. [ABSTRACT FROM AUTHOR]

The role of substrate nonlinearity in the stability of wrinkling of thin films bonded to compliant substrates is investigated within the initial post-bifurcation range when wrinkling first emerges. A fully nonlinear neo-Hookean bilayer composed of a thin film on a deep substrate is analysed for a wide range of the film-substrate stiffness ratio, from films that are very stiff compared with the substrate to those only slightly stiffer. Substrate pre-stretch prior to film attachment is shown to have a significant effect on the nonlinearity relevant to wrinkling. Two dimensionless parameters are identified that control the stability and mode shape evolution of the bilayer: one specifying arbitrary uniform substrate pre-stretch and the other a stretch-modified modulus ratio. For systems with film stiffness greater than about five times that of the substrate the wrinkling bifurcation is stable, whereas for systems with smaller relative film stiffness bifurcation can be unstable, especially if substrate pre-stretch is not tensile. [ABSTRACT FROM AUTHOR]

Abstract: Cylindrical shells under uniaxial compression and spherical shells under equi-biaxial compression display the most extreme buckling sensitivity to imperfections. In engineering practice, the reduction of load carrying capacity due to imperfections is usually addressed by use of a knockdown factor to lower the critical buckling stress estimated or computed without accounting for imperfections. For thin elastic cylindrical shells under uniaxial compression and spherical shells under equi-biaxial compression, the knockdown factor is typically as small as 0.2. This paper explores the alleviation of imperfection-sensitivity for loadings with a reduced circumferential (transverse) membrane stress component. The analysis of on the effect of an axisymmetric imperfection on the elastic buckling of a cylindrical shell under uniaxial compression is extended to both cylinders and spheres for loadings that produce general combinations of biaxial membrane stresses. Increases in the knockdown factor due to a reduction of the transverse membrane component are remarkably similar for cylindrical and spherical shells. [Copyright &y& Elsevier]

Abstract: Motivated by a selection of results on the plastic buckling of column members within a sandwich plate core where one face of the sandwich is subject to an intense impulse, the problem addressed is one where lateral buckling takes place simultaneously as a compressive axial wave propagates down the member. The bucklewave problem is modeled as an infinitely long column (or wide plate) which is clamped against lateral deflection at the end where velocity is imposed and has a moving clamped condition coinciding with the front of the plastic compression wave. The model reveals that a column or plate suddenly compressed into the plastic range is dynamically stabilized against lateral buckling for lengths that are significantly longer than the corresponding length at which the member would buckle quasi-statically. This stabilization has significant implications for energy absorption under intense dynamic loading. The analysis method is benchmarked against a simpler, but mathematically analogous problem, for which closed form solutions are available: the dynamics of a guitar string lengthening at constant velocity. [Copyright &y& Elsevier]

The plastic buckling of columns is explored in a regime where plastic wave propagation and lateral buckling are nonlinearly coupled. Underlying the work is the motivation to understand and quantify the dynamic crushing resistance of truss cores of all-metal sandwich plates where each truss member is a clamped column. Members are typically fairly stocky such that they buckle plastically and their load carrying capacity decreases gradually as they buckle, even at slow loading rates. In the range of elevated loading rates of interest here, the columns are significantly stabilized by lateral inertia, resisting lateral motion and delaying buckling and loss of load carrying capacity to relatively large overall plastic strains. The time scale associated with dynamic axial behavior, wherein deformation spreads along the column as a plastic wave, is comparable to the time scale associated with lateral buckling such that the two phenomena are coupled. Several relevant problems are analyzed using a combination of analytical and numerical procedures. Material strain-rate dependence is also taken into account. Detailed finite element analyses are performed for axially loaded columns with initial imperfections, as well as for inclined columns in a truss core of a sandwich plate, with the aim of determining the resistance of the column to deformation as dependent on the loading rate and the relevant material and geometric parameters. In the range of loading rates of interest, dynamic effects result in substantial increases in the reaction forces exerted by core members on the faces of the sandwich plate with significant elevation in energy absorption. [ABSTRACT FROM AUTHOR]

We study the effect of a dimplelike geometric imperfection on the critical buckling load of spherical elastic shells under pressure loading. This investigation combines precision experiments, finite element modeling, and numerical solutions of a reduced shell theory, all of which are found to be in excellent quantitative agreement. In the experiments, the geometry and magnitude of the defect can be designed and precisely fabricated through a customizable rapid prototyping technique. Our primary focus is on predictively describing the imperfection sensitivity of the shell to provide a quantitative relation between its knockdown factor and the amplitude of the defect. In addition, we find that the buckling pressure becomes independent of the amplitude of the defect beyond a critical value. The level and onset of this plateau are quantified systematically and found to be affected by a single geometric parameter that depends on both the radius-to-thickness ratio of the shell and the angular width of the defect. To the best of our knowledge, this is the first time that experimental results on the knockdown factors of imperfect spherical shells have been accurately predicted, through both finite element modeling and shell theory solutions. [ABSTRACT FROM AUTHOR]