Search

This paper presents research results on biocomposites made from a combination of extruded apple pomace (EAP) and potato starch (SP). The aim of this work was to investigate the basic properties of biocomposites obtained from extruded apple pomace reinforced with potato starch. The products were manufactured by hot pressing using a hydraulic press with a mould for producing samples. The prepared biocomposites were subjected to strength tests, surface wettability was determined, and a colour analysis was carried out. A thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and cross-sectioning observed in a scanning electron microscope (SEM) were also performed. The obtained test results showed that the combination of apple pomace (EAP) and starch (SP) enabled the production of compact biocomposite materials. At the same time, it was found that each increase in the share of starch in the mixture for producing biocomposites increased the strength parameters of the obtained materials. With the highest share of starch in the mixture, 40%, and a raw material moisture content of 14%, the material had the best strength parameters and was even characterised by hydrophobic properties. It was also found that materials with a high content of starch are characterised by increased temperature resistance. The analysis of SEM microscopic photos showed well-glued particles of apple pomace, pectin, and gelatinised starch and a smooth external structure of the samples. Research and analyses have shown that apple pomace reinforced only with the addition of starch can be a promising raw material for the production of simple, biodegradable biocomposite materials. [ABSTRACT FROM AUTHOR]

This paper presents the results of a study on the influence of the addition of digestate (DG) sludge from an agricultural biogas plant on the mechanical properties of the coating obtained from thermoplastic starch (TPS). The dried, fragmented digestate, some of which had previously undergone ultrasound treatment, is used in the study. Biocomposites are produced by the pouring method using Teflon moulds as matrices. The physicomechanical study included the determination of the basic parameters of the materials obtained. Strength parameters, the contact angle, thermogravimetric properties (TGA), colour and colour difference and moisture absorption are determined. Photographs of the surface of the samples are taken with a scanning electron microscope (SEM) as well. It is found that the addition of the digestate has an advantageous effect on improving the physical and mechanical parameters. In general, samples with digestate also have a higher strength compared to the pure TPS material. The highest tensile strength and Young's modulus are found in samples with the 14 wt% addition of ultrasound-treated digestate. On the basis of this study, it can be concluded that the addition of digestate is a promising approach for the production of TPS biocomposites with superior mechanical properties. [ABSTRACT FROM AUTHOR]