Search

Hydrogels are 3D polymeric networks, which exhibit properties such as softness, viscoelasticity and their ability to absorb large amounts of water. These characteristics make them exceptionally suitable in biomedicine as e.g. tissue scaffolds, drug delivery systems, wound dressings or contact lenses. One of these hydrogels is the biocompatible, hydrophilic and photopolymerizable poly(ethylene glycol) diacrylate (PEGDA). It is used in different biomedical applications due to its tunable mechanical characteristics. In our study, the mechanical properties of different PEGDA hydrogel compositions with variyng molecular masses and contents of water/methanol, were investigated. Different compositions containing 20 m%, 30 m% or 40 m% of PEGDA4K(4,000 g/mol), PEGDA10K(10,000 g/mol) or PEGDA20K(20,000 g/mol) in ultrapure water/methanol (1:2) were produced. Dumbbell-shaped samples were prepared in molds via photopolymerization in a UV chamber. Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) was used as photoinitiator (0.5% w/w). The mechanical testing was performed using a uniaxial testing system. The obtained results showed averagely 78% higher tensile strength (σmax) values for 30 m% and 40 m% samples in comparison with 20 m% samples for all of the tested polymers. PEGDA20K30 m% samples showed the highest σmax among all of the samples with 12.8 MPa. All of the PEGDA20K samples exhibited the highest elongation at break (εB) values (up to 958%), whereas the lowest values were found for PEGDA4K(up to 105%). The obtained stress-strain curves for most of the samples were typical for deformable, amorphous polymers with a deformation upon reaching a critical stress point. The PEGDA materials showed variable mechanical characteristics according to changing molecular mass or polymer concentration. These promising results showed that it should be possible to compose scaffolds with desired mechanical stability according to the needed application.

Polymer materials can be manufactured with high reproducibility and do offer the potential for chemical modification. This enables matrix property modification and fine-tuning of several material characteristics, such as tissue-implant interaction, inflammatory potential or susceptibility to biofilm formation. Whereas manufacturing protocols are crucial for the resulting material properties, also the evaluation in terms of performance and safety has to be considered. Regarding this, both, temperature and composition of test medium may affect the physicochemical properties of implant materials. The present study addresses the influence of test medium compared to dry test conditions, each at two different temperatures, on the mechanical properties of elastomeric film and nonwoven materials.

Current research activities focus on personalized, comfortable and safe products for systemic or local drug application in patients. Poly(ethylene glycol) diacrylate is in particular interest as a drug delivery material, as it shows appropriate biological properties such as hydrophilicity and low toxicity. Additionally, as an easily photopolymerizable compound it can be also utilized for the production of scaffolds with the use of different techniques such as stereolithography. Even though it is often used as a biomaterial or as a copolymer in many photopolymer systems for drug delivery, thermomechanical analysis and basic understanding are rare.

At present, a main focus in the field of stent technologies is on the development of biodegradable polymeric stents. Due to inferior material characteristics of polymers compared to permanent metals stents require thicker stents struts to accomplish adequate mechanical properties. Therefore, a thermo-mechanical treatment of polymeric stents was tested, which showed a positive effect on mechanical stent characteristics.

Abstract Resorbable magnesium scaffolds are used for the treatment of atherosclerotic coronary vascular disease and furthermore, for vascular restoration therapy. Recently, the first-in-man clinical studies with Magmaris showed promising results regarding the target lesion failure as well as vasomotion properties after 12 and 24 month. The consistency of in vivo degraded magnesium alloys in a cardiovascular environment is qualitatively described in literature, but only little has been disclosed about the actual change in mechanical properties and the behavior of the magnesium alloy degradation products. In the present study, uncoated magnesium scaffolds 3.0 × 20 mm were implanted in coronary arteries of two healthy Goetinnger mini-swine. The scaffolds were explanted to evaluate the mechanical properties of the degraded magnesium scaffolds after 180 days in vivo. Ex vivo sample preparation and test conditions were adapted to a customized compression test setup which was developed to investigate the micro-scale scaffold fragments (width 225 ± 75 µm, thickness 150 µm). As reference bare undegraded magnesium scaffold fragments were tested. Mechanical parameters relating to force as a function of displacement were determined for both sample groups. The undegraded samples showed no fracturing at the maximum applied force of 8 N, whereas the in vivo degraded test samples showed forces of 0.411 ± 0.197 N at the first fracturing and a maximum force of 0.956 ± 0.525 N. The deformation work, calculated as area beneath the force-displacement curve, of the in vivo degraded test samples was reduced by approximately 87–88% compared to the undegraded samples (5.20 mN mm and 40.79 mN mm, both at 7.5% deformation). The indication for a complete loss of structural integrity through a reduction of mechanical properties after a certain degradation time increases the chance to restore vascular function and physiological vasomotion in the stented vessel compartment. [ABSTRACT FROM AUTHOR]