Search

A hybrid of halloysite nanotubes decorated with titanium dioxide nanoparticles (HNTs@TiO2) was synthesized by the sol–gel method and then mixed with ultra‐high molecular polyethylene (UHMWPE) by melt compounding to enhance its wear resistance properties. The incorporation of HNTs@TiO2 increased the crystallinity as well as the hardness of UHMWPE nanocomposites, which benefited less prone to plastic deformation during the friction process. In addition, the UHMWPE/HNTs@TiO2 maintained a high ductility character with a slight decrease in tensile strength compared to pure UHMWPE. With the addition of 3 wt% HNTs@TiO2, the UHMWPE nanocomposite achieved a remarkably low friction coefficient of 0.073 and a reduced wear rate of 6.67 × 10−6 mm3/N·m. These values represented a 32.4% decrease in friction coefficient and a 43.9% decrease in wear rate compared to pure UHMWPE. The improvement in wear resistance was due to the dislodged TiO2 and HNTs had good synergistic rolling effects at the counterface. Furthermore, the wear scan morphology observation revealed that the transferred HNTs@TiO2‐based materials could help to improve the quality of the tribofilms, which alleviated the abrasive wear from the metallic counterpart. This work offers a feasible way to enhance the wear resistance of UHMWPE nanocomposite without sacrificing the high ductility for expanding its engineering applications. Highlights: TiO2‐decorated halloysite nanotubes were synthesized by the sol–gel method.The addition of HNTs@TiO2 maintained the high ductility character of UHMWPE.The UHMWPE composite with 3 wt% HNTs@TiO2 had the best wear resistance. [ABSTRACT FROM AUTHOR]

Poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) (P34HB) copolyester is a new type of biodegradable polymer material, but it cannot meet the market requirements because of its poor thermal stability. In this work, P34HB with a low degree of cross‐linking was successfully prepared by incorporating a small amount of a multiple epoxy chain extender, known as Joncryl ADR‐4380 (styrene‐methacrylic acid glycidyl ester copolymer), through reactive extrusion. The rheological properties, thermal stability, thermal behavior, and mechanical properties of the materials were investigated. Fourier transform infrared spectroscopy and gel content test showed that there was a significant chemical interaction between P34HB and ADR4380, and a cross‐linked structure was produced. Compared with pure P34HB, the samples after chain extension showed improved rheological properties, with increased viscosity and melt elasticity due to the formation of a gel network. Thermogravimetric analysis, dynamic time scanning experiment, and melt flow index (MFI) provided strong evidence for the enhanced of thermal stability of P34HB. The onset decomposition temperature of P34HB increased by 13.5°C, and its MFI decreased from 23.30 to around 5 at 170°C, and the complex viscosity remained relatively stable with time after modification. In terms of mechanical properties, the maximum elongation at break increased by 88.08% due to the improvement of toughness. [ABSTRACT FROM AUTHOR]

The advancement of the microelectronics industry necessitates the use of interlayer insulation materials with low dielectric constants and high mechanical properties. In this paper, a new type of copolymerized fluorinated polyimide (PI) is synthesized, and mixed with polyhedral oligomeric silsesquioxane (POSS) functionalized mesoporous silica (MCM‐41@POSS). The PI/MCM‐41@POSS composites exhibit good hydrophobicity. With the addition of 3 wt% MCM‐41@POSS, the PI composite attained an ultralow dielectric constant (k = 1.88) and low dielectric loss (0.01) at 1 MHz, which is attributed to the mesoporous structure of MCM‐41 and the restriction of polarization in the bonded region. The decorated POSS effectively prevents the penetration of PI molecular chains into the mesopores of MCM‐41. In addition, the PI composites containing 3 wt% of MCM‐41@POSS obtain the highest maximum stress of 104.03 MPa with an elongation at break of 13.73%. The hydrophobic PI composites with ultralow‐k are expected to be good candidates as interlayer materials in microelectronics devices. [ABSTRACT FROM AUTHOR]

Polylactide (PLA)/halloysite nanotube (HNT) nanocomposites with different HNT contents were prepared by melt compounding. The morphology, crystallization behavior, as well as thermal and mechanical properties of the nanocomposites were studied. The results showed that HNT were well dispersed in PLA matrix. Thermogravimetric analysis data revealed that the thermal stability of PLA was decreased with the increasing of HNT content. Differential scanning calorimetry analysis indicated that the presence of HNT could promote cold crystallization and lead to different crystalline phase formation. The flexural and tensile modulus of PLA/HNT nanocomposites improved significantly with the incorporation of HNT. Compared with neat PLA foam, PLA/HNT nanocomposite foams showed much higher cell density and smaller cell size due to HNT serving as the heterogeneous nucleating agents. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

An electromagnetic dynamic plasticating extruder, invented by the authors, was used to prepare isotactic polypropylene (PP) sheets. Tensile and impact tests show that the extruded samples can simultaneously be reinforced and toughened along the flow and transverse directions in a moderate frequency and amplitude range. The microstructures of the obtained samples were characterized by differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and scanning electron microcopy (SEM). The results indicate that the vibration plasticating extrusion affected the morphology of the PP extrudate, it especially resulted in finer spherulites, and move tie molecules, which account for the enhancement of the tensile strength and impact toughness of PP sheets in both extrusion and transversal directions. [ABSTRACT FROM AUTHOR]