Search

Background The screening of biological hazards, chemical contaminants and allergens in food products is a major concern of food industry since they can cause serious illnesses and even lead to death. Therefore, there is a significant interest in developing low-cost, robust, and rapid detection methods for food safety and quality analysis. Conventional methods provide accurate analytical characteristics, but require well-equipped laboratories, trained personnel, costly reagents, and complicated sample preparation procedures prior to the detection in order to obtain reliable results. Hence, they are not always ideal for on-site food surveillance. Scope and approach This paper discusses the fundamentals of microfluidic paper-based analytical devices (μPADs) and reviews the recent progress in their usage for screening biological hazards, harmful chemical residues, and allergens in food products to systematically evaluate the strengths and weaknesses of this technology. It then covers future trends and useful strategies that could be employed in μPADs design and fabrication procedures to address the critical challenges in equipment-free food analysis. Key findings and conclusions μPADs offer promising avenues to revolutionize food safety and quality analysis with merits of equipment-free sample preparation and detection at low-cost. Despite the advancement in the microfluidic technology, the manufacturing of user-friendly sample-to-answer μPADs still requires intensive research studies to be employed for robust and sensitive food safety and quality analysis.

The construction industry had approached a critical limit which led to the increase of cement production. The production of cement would cause a broader environmental implication. Cement production is a major source of carbon dioxide emission. Carbon dioxide gas contributes about 63.33% of global warming since the production of one ton of cement would emit about one ton of carbon dioxide to the environment. To mitigate this issue, the research community has investigated the use of waste materials that possess similar chemical properties with cement content as a material for partial cement replacement. The use of rice husk ash has shown to be a contending candidate in the literature. Therefore, this paper attempts at reviewing the performance of rice husk ash as partial cement replacement. It could be observed from the literature that concrete with 5% up to 15% of rice husk ash showed an equivalent performance to ordinary concrete in compressive, flexural, and tensile strength. Thus, rice husk ash can be used as a material replacement in concrete and reduces pollution that originates from cement production and open burning of rice husk.

Palliative radiation therapy (pRT) is an effective tool for people with incurable cancer, in the treatment of many cancer-related symptoms such as pain, bleeding and dyspnea. As utilization rates for palliative radiation therapy increase, the demands on the healthcare system continue to grow. Radiation Therapists with advanced knowledge, skills and judgements began demonstrating their ability to practice autonomously in 2004, with the development of the Clinical Specialist Radiation Therapist (CSRT) role. Since this time, CSRTs with a specific focus in pRT (pCSRT) have been increasing in both numbers as well as their positive effects on the cancer care system. Integrating a pCSRT into the existing pRT system has resulted in increased access to and quality of pRT being delivered to palliative cancer patients. The benefits of the addition of pCSRTs to the cancer care system include increasing system capacity and increasing quality of care. This white paper provides information related to the improvements that can be realized in a RT program related to the care and treatment of its palliative patients by adding a pCSRT to the interprofessional healthcare team and suggest it as one of many strategies that can be undertaken to make improvements to access and quality of care.

This article discusses Freud’s presentation on telepathy to his close colleagues at the meeting in the Harz mountains in 1921. It considers the fate of his paper and the reasons why he never published it as a single piece. The development of Freud’s ideas about telepathy during the succeeding years and the reasons that prompted him finally to publish his views on thought-transference in 1925 are also considered. The article also discusses the place of the four cases presented in his writings on telepathy over this period, culminating in his new ‘lecture’ on Dreams and Occultism in 1933. It is suggested that Freud’s persuasion that psychoanalysis could credibly account for thought-transference was in part affected by the degree of trust he held in those presenting him with material, but most of all by his own personal experience. Freud held out against opposition from people like Jones on the matter of the worthiness of the subject for investigation, but never succeeded in integrating it more fully into psychoanalysis, and this position is largely unchanged today.

The global reality of the COVID-19/Corona pandemic paradoxically boosted national politics, broadcasting and citizenship. Media coverage, especially initially, praised citizen solidarity and the creative solutions that were pioneered to care for each other. A year later, a lasting social learning curve throughout and after this crisis seems illusory. The pandemic, this paper argues, needs to be understood in a longer timeframe as the working through and coming to terms with neo-liberal governmentality. The (often hilarious) early responses on social media provide a strong entry to do so. Our focus will be on the Netherlands which had a so-called ‘intelligent’ lockdown during the first wave of COVID-19 in the spring of 2020. Using the authors’ own sharing back and forth of toilet paper memes as a starting point, we aim to explore the notion of collective self-reflection and citizen co-education underlying both heated and simply ridiculous posts. Using previous discussion of cultural citizenship, this paper inquires into how pandemic citizenship played out as a vast exercise in disciplining and distinction through jokes and anger. The material suggests a nostalgic turn that might point to an implicitly voiced critique of neoliberal governmentality.

Recent decades have witnessed increasing interest in the concept of the circular economy within both the business world and political circles. The circular economy spans the entire life cycle of products from product design through production, marketing, and consumption, to waste management, recycling, and re-use, and enthusiasm for putting the concept into practice has been identified across different sectors of the economy. This exploratory case study reviews how some of the leading companies in the paper and retail industries, have publicly addressed the circular economy. The case study outlines the nature of the circular economy, provides a cameo literature review of published work on the circular economy, describes the approach adopted for the case study, reports the findings of the review of how the leading companies in the paper and retail industries have addressed the circular economy, and discusses some wider issues. Keywords: circular economy, case study, paper industry, retail industry, greenwash, economic growth

Illicit drug use causes over half a million deaths worldwide every year. Drugs of abuse are commonly smuggled through customs and border checkpoints and, increasingly, through parcel delivery services. Improved methods for detection of trace drug residues from surfaces are needed. Such methods should be robust, fieldable, sensitive, and capable of detecting a wide range of drugs. In this work, commercially produced paper with a pressure-sensitive adhesive coating was utilized for the collection and analysis of trace drug residues by paper spray mass spectrometry (MS). This modified substrate was used to combine sample collection of drug residues from surfaces with rapid detection using a single paper spray ticket. The all-in-one ticket was used to probe different surfaces commonly encountered in forensic work including clothing, cardboard, glass, concrete, asphalt, and aluminum. A total of 10 drugs (acetyl fentanyl, fentanyl, clonazolam, cocaine, heroin, ketamine, methamphetamine, methylone, U-47700, and XLR-11) were evaluated and found to be detectable in the picogram range using a benchtop mass spectrometer and in the low nanogram range using a portable ion trap MS. The novel approach demonstrates a simple yet effective sampling strategy, allowing for rapid identification from difficult surfaces via paper spray mass spectrometry.

The study attempted to assess the water quality around paper mill effluents discharge areas. Several physicochemical parameters and the Canadian Council of Ministers of the Environment (CCME) Water Quality Index (WQI) were considered to determine the pollution level of surface and groundwater in the selected paper mills areas located in Saidpur, Gobindaganj, and Dupchanchia Upazilas of Bangladesh. Physicochemical characterization of the surface water around the paper mills areas showed that the concentration of EC, TSS, BOD5, COD, phenols, NO3−-N, and K+were exceeded the surface water standard, whereas the DO level ranged from 1.63 to 3.5 were found below the Environmental Conservation Rules (ECR), 1997 standard. Besides, the BOD, COD, and Mn ion concentrations of groundwater exceeded the drinking water standard. In most sampling sites, the WQI of the surface water showed ‘marginal’ category, and the groundwater quality showed 'fair' category. The study observed that the toxic effluents discharged from the paper mills caused harm to the aquatic ecosystem.

Chemotherapeutic drugs have been widely used in the treatment of cancer disease for about 70 years. The development of new treatments has not hindered their use, and oncologists still prescribe them routinely, alone or in combination with other antineoplastic agents. However, all chemotherapeutic agents can induce hypersensitivity reactions (HSRs), with different incidences depending on the culprit drug. These reactions are the third leading cause of fatal drug-induced anaphylaxis in the United States. In Europe, deaths related to chemotherapy have also been reported. In particular, most reactions are caused by platinum compounds, taxanes, epipodophyllotoxins and asparaginase. Despite their prevalence and relevance, the ideal pathways for diagnosis, treatment and prevention of these reactions are still unclear, and practice remains considerably heterogeneous with vast differences from center to center. Thus, the European Network on Drug Allergy and Drug Allergy Interest Group of the European Academy of Allergy and Clinical Immunology organized a task force to provide data and recommendations regarding the allergological work-up in this field of drug hypersensitivity reactions. This position paper aims to provide consensus on the investigation of HSRs to chemotherapeutic drugs and give practical recommendations for clinicians that treat these patients, such as oncologists, allergologists and internists. Key sections cover risk factors, pathogenesis, symptoms, the role of skin tests, in vitro tests, indications and contraindications of drug provocation tests and desensitization of neoplastic patients with allergic reactions to chemotherapeutic drugs. Statements, recommendations and unmet needs were discussed and proposed at the end of each section.

This research is an analysis of quality control process on paper production on the soft roll production process of Bel Papyrus Ltd located in Ogba, Lagos State, Nigeria. The research was done with the aim of determining the conformity of the industry’s product to quality standard, identifying and eliminating the possible causes of variation in their production process, with reference to Percentage Elongation. The researchers used primary data in form of periodic laboratory test result done on soft rolls.Data presentations were made using simple statistical tools like Mean, Ranges, Standard Deviations, and Tables reflecting the primary data obtained at equal interval of production. The researchers made use of variable control charts for the purpose of analysis. The

Clear legal content of white papers provides certainty, stability and trust in the relations between all the participants in initial coins offering (ICO) procedures and contributes to the successfu...

European pharmaceutical companies have a legal requirement to provide non-promotional Medical Information (MI) services to support healthcare professionals (HCPs) who are using their medicinal products. While the industry has self-regulating bodies with established Codes of Practice, these mainly focus on promotional messaging and commercial activities. In the absence of similar frameworks for MI, such services struggle to understand how to meet HCP digital expectations, often in fear of breaching the promotional codes. This is limiting access to the wealth of non-promotional patient-focussed information held within the industry. Meanwhile, a large volume of unregulated, low-quality information can be readily found on the internet. To understand the current status, the Medical Information Leaders in Europe (MILE) industry association performed a benchmarking survey which explored the online MI service provision of 13 mid-large pharmaceutical companies across Europe. This highlighted a great diversity in approach in terms of geographical coverage and content. Visibility and access for HCPs is complex, compromising online engagement and website utilisation. This MILE position paper highlights the critical need to establish a clear governance model, which empowers pharmaceutical company MI functions to provide unbranded, non-promotional, medicinal product information sources to support HCP online information needs. It is essential to build confidence, transparency and trust by establishing a practical quality framework with principles and standards for online MI services for HCPs.

Synthetic cannabinoid receptor agonists (SCRAs) are a class of varied compounds that mimic the effects of natural cannabinoids found in cannabis. Because they have a wide range of diverse structures, they vary widely in their potency. The abuse of new psychoactive substances (NPS) in prisons was reported in many European countries and in the USA. In the present study, we have described the identification of SCRAs in 56 infused paper sheet samples, seized mainly in Brazilian prisons between 2016 and 2020. The materials were seized by local or federal law enforcement and analyzed by Sao Paulo State Police or Brazilian Federal Police using gas chromatography–mass spectrometry, attenuated total reflection-Fourier transform infrared spectroscopy, liquid chromatography–high-resolution mass spectrometry or nuclear magnetic resonance spectrometry. Most of these samples (87.5%) were seized in 2019–2020; seven different SCRAs were identified in samples, and the most frequently identified substances were MDMB-4en-PINACA (23.6%) and 5F-MDMB-PICA (36.4%), the newest SCRAs emerging recently. As observed in Europe and the USA, Brazil also shows the prevalence of indazole-3-carboxamides and indole-3-carboxamides among SCRAs seizures in the prison system. This phenomenon is spreading all over the world at this moment. These data on the prevalence could help to alert judicial authorities to shutting down the introduction of NPS, including SCRAs, into prisons to ensure safety and security for avoiding health risks of prisoners and staff, leading to positive effects in this population. To our knowledge, this is the first demonstration of SCRAs smuggling into prisons in Latin America.

Allergo journal international 30(5), 155-168 (2021). doi:10.1007/s40629-021-00178-2, Published by Urban & Vogel, München

International audience; In 2014 leading publishers withdrew more than 120 nonsensical publications automatically generated with the SCIgen program. Casual observations suggested that similar problematic papers are still published and sold, without follow-up retractions. No systematic screening has been performed and the prevalence of such nonsensical publications in the scientific literature is unknown. Our contribution is 2-fold. First, we designed a detector that combs the scientific literature for grammar-based computer-generated papers. Applied to SCIgen, it has a 83.6% precision. Second, we performed a scientometric study of the 243 detected SCIgen-papers from 19 publishers. We estimate the prevalence of SCIgen-papers to be 75 per million papers in Information and Computing Sciences. Only 19% of the 243 problematic papers were dealt with: formal retraction (12) or silent removal (34). Publishers still serve and sometimes sell the remaining 197 papers without any caveat. We found evidence of citation manipulation via edited SCIgen bibliographies. This work reveals metric gaming up to the point of absurdity: fraudsters publish nonsensical algorithmically generated papers featuring genuine references. It stresses the need to screen papers for nonsense before peer-review and chase citation manipulation in published papers. Overall, this is yet another illustration of the harmful effects of the pressure to publish or perish.

In this paper, we present a system for automatic evaluation of the quality of a question paper. Question paper plays a major role in educational assessment. The quality of a question paper is crucial to fulfilling the purpose of the assessment. In many education sectors, question papers are prepared manually. A prior analysis of a question paper might help in finding the errors in the question paper, and better achieving the goals of the assessment. In this experiment, we focus on higher education in the technical domain. First, we conducted a student survey to identify the key factors that affect the quality of a question paper. The top factors we identified are question relevance, question difficulty, and time requirement. We explored the strategies to handle these factors and implemented them. We employ various concepts and techniques for the implementation. The system finally assigns a numerical quality score against these factors. The system is evaluated using a set of question papers collected from various sources. The experimental results show that the proposed system is quite promising.

The aims of this study are to investigate the problems and challenges of university students in writing English scholarly article for an international journal and to elaborate their perceptions toward the importance of writing for the publication. Furthermore, it also explores the certain needs to support their skills in the process of writing the article.The investigation involves 20 students from one of the universities in Indonesia. It uses a questionnaire consisted of 24 items to understand the students‟ problems and perceptions of the issues in relation to writing for the academic publication in English. The findings of this study indicate that claiming knowledge was the most difficult aspect in writing the article. On the other hand, students agree that writing for international publication is considered as a crucial action in academic field, and henceforth, they needs to have university‟s support to prepare students‟ writing. Finally, some suggestions related to students‟ problem in writing for international publicationare are offered.

Feedback is beneficial to students’ learning process and overall achievement, but one of the common complaints from students about college education is regarding feedback. So, this study aimed to examine whether digital written feedback positively influences students’ learning experience and attitude toward learning. Digital written feedback refers to feedback provided through a learning management system as handwritten feedback added to a scanned copy of the student’s paper-based assessment using a smart pad and smart pencil. The study surveyed a diverse set of college students’ (n = 175) perceptions regarding feedback satisfaction, learning satisfaction, the usefulness of digital written feedback, and perceived achievement via an online survey. A one-way analysis of variance found a significant difference between feedback satisfaction and learning satisfaction according to the feedback method. A multiple regression analysis indicated the satisfaction and perceived usefulness of digital written feedback predicted perceived achievement. From the students’ open responses regarding the benefits of digital written feedback, five themes emerged, namely usability, psychological relief, accessibility, self-regulation, and acceptance. The implications for digital written feedback are discussed.

This research presents a solar-blind (UVC) office paper-based photodetector that is self-biased, superflexible, nonwettable, high-performance, and high-voltage stable. In contrast to the traditiona...

Objectives. To investigate the rate of manuscript submission to a major peer-reviewed journal (American Journal of Public Health) by gender, comparing periods before and during the pandemic. Methods. We used data from January 1 to May 12, 2020, and defined the start of the pandemic period by country as the first date of 50 or more confirmed cases. We used an algorithm to classify gender based on first name and nation of origin. We included authors whose gender could be estimated with a certainty of at least 95%. Results. Submission rates were higher overall during the pandemic compared with before. Increases were higher for submissions from men compared with women (41.9% vs 10.9% for corresponding author). For the United States, submissions increased 23.8% for men but only 7.9% for women. Women authored 29.4% of COVID-19–related articles. Conclusions. Our findings suggest that the pandemic exacerbated gender imbalances in scientific research.

Virgin pulp is made by splitting up cellulose fibers from the woods by mechanical and chemical process without adding any recycled pulp content. The demand for trees, which are the basic raw material for making virgin pulp, increasing constantly in enormously growing paper manufacturing industry. The paper, which is made from virgin pulp is called as virgin paper and this is considered as better quality paper than the recycled paper. Now there is a need to increase the quality of recycled paper to equalize the quality of virgin paper, to reduce the demand for trees to make virgin pulp. In recycling, dispersive system is responsible for the de-inking process, which is one of the pulp purifying process which removes the printing ink from fibers. Chemicals are added in this deinking process which causes a serious problem by increasing the chemical concentration level of industrial outlet water. In conventional deinking technology, dispersive system is controlled by DCS which is quite complicated to control complex loop of operations. To overcome these problems, the dispersive system operations are controlled by PLC along with sensors which make the process easier and replacing the chemicals with enzymes will reduce the chemical concentration level of industrial outlet water and increases the quality of paper.

In Nazi Germany (1933–45), reclaiming waste became an intrinsic component of the regime’s economy as well as its ideological, racial, and expansionist ambitions. National Socialist interventions in...

Human trafficking is a pandemic human rights violation with an emerging paradigm shift that reframes an issue traditionally seen through a criminal justice lens to that of a public health crisis, particularly for children. Children and adolescents who are trafficked or are at risk for trafficking should receive evidence-based, trauma-informed, and culturally responsive care from trained health care providers (HCPs). The purpose of this article was to engage and equip pediatric HCPs to respond effectively to human trafficking in the clinical setting, improving health outcomes for affected and at-risk children. Pediatric HCPs are ideally positioned to intervene and advocate for children with health disparities and vulnerability to trafficking in a broad spectrum of care settings and to optimize equitable health outcomes.

The aim of this review is to introduce the information concerning advanced technology of ink-jet printing regarding characteristics and ink-jet paper. It is believed that ink-jet paper having suitable liquid absorption characteristics and drying techniques are required to improve image quality on high-speed inkjet printing. Although the development of high quality ink-jet paper is important, the demand or the dual-purpose coated paper that can be used with offset and ink-jet printing is expected to increase for the time being. Meanwhile, it is important to get cost down and raise the productivity of the inkjet paper to secure competitiveness comparable to that of offset coated paper. For those objectives we think that the development of new technologies is required for pigment development, composition design of the coating ingredients, and rheological characteristics analysis of coating colors.

The main purpose of the living technology curriculum is to cultivate students' interest in learning science and technology, and further to utilize their experience of learning instructions and develop their ability to integrate interdisciplinary knowledge and skills. In recent years, as countries have begun to emphasize the concept of interdisciplinary integration in the school education, STEM (Science, Technology, Engineering, and Mathematics, STEM) focuses on cultivating interdisciplinary talents. With this, STEAM highlights the role of ART because other dimensions of STEM are expected to be effectively integrated through the cultivation of aesthetics; the purpose of this study is to design a STEAM curriculum for elementary school children and to explore the impact of STEAM education on the creativity. The content of this course is based on the PBL (Project-Based Learning) with the teaching activities combining with “Chinese Paper-cutting” and “BBC micro: bit”. The teaching process is used the strategy of creative thinking instruction. The research method adopts a one-group pretest–posttest design based on a purposive sampling of 21 students from one class in an elementary school. The research tools included the records of learning feedback and the creativity assessment. The empirical findings show that the project-based learning incorporating STEAM activity has a positive significant influence on students’ development of creative recognition. Since the empirical results are constricted by the short-term STEAM course, the STEAM course with the art-oriented still benefits the STEAM education and Learning effectiveness of elementary school students. The implication of interdisciplinary interactive Lamp of Paper Carving with Micro:Bit is expected to contribute to further development of STEAM course. Since the curriculum is only last for few weeks, it is too short to affect the emotional facet of creativity. Future researches are suggested to extend the teaching period and evaluate the long-term influence of PBL STEAM on students' learning attitude.

The American Society for Parenteral and Enteral Nutrition (ASPEN) Position Paper focus is on applying the 4 ethical principles for clinician's decision-making in the use of artificially administered nutrition and hydration (AANH) for adult and pediatric patients. These basic principles are (1) autonomy, respect the patient's healthcare preferences; (2) beneficence, provide healthcare in the best interest of the patient; (3) nonmaleficence, do no harm; and (4) justice, provide all individuals a fair and appropriate distribution of healthcare resources. Preventing and resolving ethical dilemmas is addressed, with an emphasis on a collaborative, interdisciplinary approach. Optimizing early communication and promoting advance care planning, involving completion of an advance directive, including designation of a surrogate decision-maker, are encouraged. Clinicians achieve respect for autonomy when they incorporate the patient, family, community, country, geographical, and presumed cultural values and religious belief considerations into ethical decision-making for adults and children with a shared decision-making process. These discussions should be guided by the 4 ethical principles. Hospital committees and teams, limited-time trials, clinician obligation with conflicts, and forgoing of AANH are addressed. Specific patient conditions are addressed because of the concern for potential ethical issues: coma, decreased consciousness, and dementia; advanced dementia; cancer; eating disorders; and end-stage disease/terminal illness. Incorporated in the Position Paper are ethical decisions during a pandemic and a legal summary involving ethical issues. International authors presented the similarities and differences within their own country or region and compared them with the US perspective.

In the today’s context of COVID-19, when a strong need of disposable items without compromising the environmental attributes is being felt, “Paper” is becoming a very mesmerizing and quintessential object. We find paper in our lives so omnipresent and enduring that we take it granted without understanding its complex nature, manufacturing/development process and the significant role, it has actually played in the history of civilization. It is so important that the Per Capita Consumption of paper for a country reflects the development status of its society. Therefore, this article attempts to introduce paper with its historical development, manufacturing process, environmental concerns, ways to address the environmental concerns, global and national status of pulp and paper industry along with the challenges ahead with a coverage of the potential role it is bound to play in future through an overall transformation of the industry itself.

Flexible paper-based sensors may be applied in numerous fields, but this requires addressing their limitations related to poor thermal and water resistance, which results in low service life. Herein, we report a paper-based composite sensor composed of carboxylic carbon nanotubes (CCNTs) and poly-m-phenyleneisophthalamide (PMIA), fabricated by a facile papermaking process. The CCNT/PMIA composite sensor exhibits an ability to detect pressures generated by various human movements, attributed to the sensor's conductive network and the characteristic "mud-brick" microstructure. The sensor exhibits the capability to monitor human motions, such as bending of finger joints and elbow joints, speaking, blinking, and smiling, as well as temperature variations in the range of 30-90 °C. Such a capability to sensitively detect pressure can be realized at different applied frequencies, gradient sagittas, and multiple twists with a short response time (104 ms) even after being soaked in water, acid, and alkali solutions. Moreover, the sensor demonstrates excellent mechanical properties and hence can be folded up to 6000 times without failure, can bear 5 kg of load without breaking, and can be cycled 2000 times without energy loss, providing a great possibility for a long sensing life. Additionally, the composite sensor shows exceptional Joule heating performance, which can reach 242 °C in less than 15 s even when powered by a low input voltage (25 V). From the perspective of industrialization, low-cost and large-scale roll-to-roll production of the paper-based sensor can be achieved, with a formed length of thousands of meters, showing great potential for future industrial applications as a wearable smart sensor for detecting pressure and temperature, with the capability of electric heating.

Objective This study collected randomized controlled trials (RCTs) published in the social sciences in China and assessed their risk of bias and reporting quality. Study Design and Setting Three databases were systematically searched for publications from January 2000 to June 2020 for RCTs in the social sciences published by Chinese researchers. The risk of bias was assessed using the Cochrane Collaboration Risk of Bias Tool (CCRBT), and reporting quality was assessed using the Consolidated Standards of Reporting Trials for Social and Psychological Interventions (CONSORT-SPI). Results A total of 316 RCTs were identified, including 204 articles in English and 112 articles in Chinese. The most frequently researched interventions focused on education (33.9%), and the most frequently studied population were students (32.9%). Eighty-seven percent of RCTs had intermediate reporting quality. Twenty-four of the 43 CONSORT-SPI sub-items had a compliance rate of less than 50%. Most RCTs had an unclear risk of bias for blinding outcome assessors (84.5%), blinding participants and personnel (82.9%), allocation concealment (73.1%), and random sequence generation (68.0%). A low proportion of CONSORT-SPI items were reported and, high proportion of the papers had unclear risk of bias. Conclusion The quality and reporting of RCTs in the social sciences needs improvement in China, especially for reporting methods and results. Most studies had an unclear risk of bias as they lacked important methodological information.

Physical paper puppets are inanimate objects, but when we’re speaking in terms of the production of traditional paper cut out animation, they become the actors and the souls that drive the movie. When shooting and animating traditional paper cut out animation, the puppets are laid flat on a surface so they can only move in limited directions compared to conventional 2D or 3D animation. As we know, each character in animated movie has its own personality and unique to each other. The challenge lays in bringing out the characteristics and personality of the character through the limited medium of paper puppet. In this qualitative research, puppet movements will be applied to quadruped cat characters in a public service announcement titled “Spay & Neuter”. The puppet along with the visual design, segmentations, and joints were done in previous research. Qualitative observations and audio-visual materials are used to collect the data for references. Literature review will study the characteristics of cats, body language, behaviour, and principles of animation especially timing and exaggeration. Observation is conducted by studying the movements of real cats from online videos and direct observations and also studying how other animators animate cat characters in animated films. In the exploration stage, paper puppets will be animated according to the movement design while experimenting with the timing and frame rate of the stop motion to achieve the final results.

Around 60% of the paper worldwide is made from recovered paper. Especially adhesive contaminants, so called stickies, reduce paper quality. To remove stickies but at the same time keep as many valuable fibers as possible, multi-stage screening systems with several interconnected pressure screens are used. When planning such systems, suitable screens have to be selected and their interconnection as well as operational parameters have to be defined considering multiple conflicting objectives. In this contribution, we present a Mixed-Integer Nonlinear Program to optimize system layout, component selection and operation to find a suitable trade-off between output quality and yield.

To date, very few treatments have been demonstrated to reduce the burden of morbidity and mortality from COVID-19. Although corticosteroids have been proven to reduce mortality in severe disease, there has been little convincing evidence on interventions that may prevent disease, reduce hospitalizations, and reduce the numbers of people progressing to critical disease and death. Ivermectin is a well-known medicine that is approved as an antiparasitic by the World Health Organization and the US Food and Drug Administration. It is widely used in lowand middle-income countries to treat worm infections. Also used for the treatment of scabies and lice, it is one of the World Health Organization’s Essential Medicines.1 With total doses of ivermectin distributed apparently equalling one-third of the present world population,1 ivermectin at the usual doses (0.2–0.4 mg/kg) is considered extremely safe for use in humans.1 In addition to its antiparasiticactivity, it has been noted to have antiviral and anti-inflammatory properties, leading to an increasing list of therapeutic indications. South African authorities approved the use of a drug used to control parasites in humans and livestock to treat coronavirus patients. Additionally, in January 2021, the South African Health Products Regulatory Authority (SAHPRA) announced that ivermectin, would be allowedfor use on compassionate grounds in a controlled-access program. Ivermectin locally has been used for the prevention and/or management of Covid-19 infection. This has resulted in a huge black market trade of ivermectin in South Africa as many health professionals and others have taken to social media and other platforms to profile this drug as an effective treatment for the covid-19 viral infection. Roman and colleagues (2021)1 conducted a systematic review and meta-analysis to evaluate treatment effects of Ivermectin (IVM) on clinical outcomes and adverse events (AEs) in people with COVID-19.

Background A proportion of veterans experience post-traumatic stress disorder (PTSD). Research has shown reduced effectiveness of commonly offered psychotherapies in military personnel. Some research suggested the usefulness of art therapy for veterans with PTSD, but its mechanism of operation has been unclear. The current project aimed to establish participants’ perceptions of any impact of group art therapy and some of the perceived mechanisms of change. Method In a grounded theory design, single semi-structured interviews were conducted with nine veterans who had received group art therapy, two art therapists, and a veteran's wife. Interviews were transcribed and analysed. Findings Theorised categories included (a) art therapy group as “the family”, (b) “the gentle conductor”, (c) trust, (d) doing the work, (e) art therapy as "a communication tool", (f) "points of recognition", (g) "making things concrete", and (h) "not a cure". Limitations Shortcomings included a homogenous sample who all attended art therapy alongside other interventions, reliance on subjective and unmeasured symptom change, and researcher effects related to qualitative methodology. Conclusion The developed grounded theory is consistent with existing evidence and neuropsychological theory. Group art therapy may enable some veterans to prepare for verbal-only therapy, by offering a safe space in which to approach non-verbal traumatic and trauma-related contextual material in a controlled way. Artworks may provide a bridge to facilitate communication of experiences within subsequent verbal therapy and with loved-ones. It is suggested to replicate the project at different sites. Elements of the developed theory may be investigated further to establish its transferability.

Perinatal depression can have enduring adverse effects on women and their children and families, incurring substantial ongoing economic and personal costs. A significant proportion of the cost of perinatal depression relates to adverse impacts on the child, most likely mediated through impairment to the mother-infant relationship. In recognition of this problem, Australia has invested in routine perinatal depression screening. Our previous research produced convergent findings suggesting that expected benefits for children have not yet been realised through perinatal depression screening. We question the potential of including a measure of personality in current perinatal depression screening for identifying maternal mental health problems and suboptimal mother-infant relationships. This paper reviews our previous research findings within the broader context of perinatal depression screening. We propose a position, that perinatal depression screening in Australia should be redesigned to more precisely detect vulnerable mother-infant relationships, parenting, maternal mental health, and infant psychosocial and psychological development. Practice change to appropriately target antenatal interventions may more efficiently improve both maternal and child outcomes, thereby contributing to greater efficiency and cost savings for the health system.

This study was carried out in an attempt to evaluate the impact of Broussonetia papyrifera as a roughage substitute at different levels on carcase traits, growth performance, meat quality and immune performance in Hu ram lambs. Sixty Hu rams (5 months of age, 26.70 ± 2.14 kg body weight) were randomly divided into four groups. The treatments comprised B. papyrifera supplementation at levels of 0% (G0), 30% (G30), 60% (G60) and 100% (G100) of roughage feed. The results suggested that diet supplemented with B. papyrifera (G100 group) caused a higher average weight gain (AWG) and average daily gain (ADG) than those of G0 group. The highest carcase weight was observed in the G60 group. The chemical and physical properties of the longissimus dorsi muscle of Hu rams showed no significant differences (p>.05). For fatty acid, the G60 group had significantly lower content of saturated fatty acids (SFAs), higher contents of monounsaturated fatty acids (MUFAs) and polyunsaturated fatty acids (PUFAs) and higher PUFA/SFA ratio than other groups (p

The transperineal approach is preferred to reduce prostate biopsy (PB)-related infections. Fluoroquinolones are suspended for prophylaxis of PB in the European Union; therefore, alternative antibiotics based on local resistance, or targeted prophylaxis, in conjunction with povidone-iodine rectal preparation are recommended for transrectal PB.

Introduction Muscular dystrophies present a group of inherited degenerative disorder that are characterized by progressive muscular weakness. This evidence-based position paper represents the official position of the European Union through the UEMS PRM Section. The aim of the paper is to evaluate the role of the physical and rehabilitation medicine (PRM) physician and PRM practice for people with muscular dystrophies. Evidence acquisition A systematic review of the literature and a consensus procedure by means of a Delphi process have been performed involving the delegates of all European countries represented in the UEMS PRM Section. Evidence synthesis The systematic literature review is reported together with thirty-three recommendations resulting from the Delphi procedure. Conclusions The role of the PRM physician is to assess the functional status of persons with muscular dystrophy and to plan, monitor and lead PRM program in an interdisciplinary setting within a multiprofessional team.

The article examines Soviet paper reuse as an ideological, economic daily practice, implemented through the advanced, but hitherto undescribed Soiuzutil’ waste collecting system by the early 1930s as the reverse side of Stalinist industrialization. It argues that Soiuzutil’ waste paper handling attempted to form a new socialist collective by reworking old print while cultivating citizens as classless scrap-collectors, for the sake of an (ir)rational resource optimization. While World War II intensified recycling efforts among the Allied and Axis powers, invasion and evacuation damaged Soviet waste collection to a point where no return of paper into a centralized system was possible. War forced printers and consumers to retreat to local self-supply networks, as paper remained a crucial, yet scarce resource. By analyzing technical-educational literature and correspondence of the reutilization offices, the article demonstrates the changing attitudes in the Stalinist war economy, the industries, and the population towards mobilizing and saving paper.

International audience

Washi is paper made by hand from the bark of native Japanese shrubs. Washi is a common medium used for printmaking and paper crafts. Artists who have studied nagashi-zuki, a sheet-forming method un...

This study aims to analyze the factors that influence firm value, where the independent variables consist of ownership structure, capital structure and gender diversity, and financial performance as a mediation. The research used is Pulp & Paper companies listed on the Indonesia Stock Exchange for the period 2015 – 2019. Using samples from 7 manufacturing companies. By using a sample of 7 manufacturing companies. The test analysis used is the SmartPLS 3.0 program. Based on the results of the study, ownership structure and gender diversity have no significant effect on firm value, capital structure and financial performance have a significant positive effect on firm value, and financial performance has no significant effect on mediating ownership structure and capital structure on the firm. The limitation of this study is to use financial reports sourced from the Indonesia Stock Exchange (IDX) for the pulp and paper sector from 2015-2019 and have financial reports for 5 consecutive years. The implications of this research are expected to provide information for investors on things that can affect the value of the company, especially the paper industry sector.How to Cite:Fernando, W., & Setiawan, T. (2021). Analisis Model Atas Faktor Penentu Nilai Perusahan (Studi Pada Perusahaan Pulp and Paper yang Terdaftar di BEI 2015-2019). Akuntabilitas: Jurnal Ilmu Akuntansi, 14(2), 231-242.

Purpose This paper aims to present the components' characterization and condition assessment of an important deteriorated Mamluk-illuminated paper manuscript housed in Al-Azhar Library, Egypt. Design/methodology/approach Different analytical techniques used in this study were the portable digital optical microscope, stereomicroscope, scanning electron microscope with EDX (SEM.EDX), portable X-ray fluorescence (pXRF), X-ray diffraction (XRD), pH measurement and Fourier transform infrared spectroscopy (FTIR). Findings The results obtained by different microscopes showed that the gilding in the surface of illuminated paper sheets was performed with gold leaves. Additionally, these microscopes revealed that the illuminated paper manuscript has different aspects of deterioration such as adhered dirt, staining, some micro-cracks, cracks and detachment of some parts in some illuminated areas. The results of elemental analysis by EDX, portable XRF and XRD analysis showed that the orange red pigment is red lead (Pb3O4), blue pigment is azurite (2CuCo3.Cu (OH)2), and the gold layer is has consisted of brass alloy (Cu-Zn) with a small amount of gold element (Au). The pH measurement stated that the historical paper in the acidity level. The ATR-FTIR analysis also revealed the oxidation of cellulose. Moreover, it was found from ATR-FTIR that Arabic gum was used as a binder for the pigments. Originality/value This study presents the important results of analytical methods used for condition assessment and identification of the components of an important Mamluk-illuminated paper manuscript, where these results referred that the studied paper manuscript had different aspects of deterioration. The conservation steps either conservation treatment or preventive conservation are urgently needed in future studies.

PurposeSynergy indicators and social network analysis (SNA), as practical tools, provide the possibility of explaining the pattern of scientific collaboration and visualization of network relations. Recognition of scientific capacities is the basis of synergy. The present study aims to measure and discover the synergistic networks of COVID-19’s top papers at the level of co-authorship, countries, journals, bibliographic couples and titles.Design/methodology/approachThe synergy indicator, co-authorship co-citation network analysis methods were applied. The research population comprises COVID-19’s top papers indexed in Essential Science Indicator and Web of Science Core Collection 2020 and 2021. Excel 2016, UCINET 6.528.0.0 2017, NetDraw, Ravar Matrix, VOSviewer version 1.6.14 and Python 3.9.5 were applied to analyze the data and visualize the networks.FindingsThe findings indicate that considering the three possible possibilities for authors, countries and journals, more redundancy and information are created and potential for further cooperation is observed. The synergy of scientific collaboration has revealed that “Wang, Y,” “USA” and “Science of the Total Environment” have the most effective capabilities and results. “Guan (2020b)” and “Zhou (2020)” are bibliographic couplings that have received the most citations. The keywords “CORONAVIRUS DISEASE 2019 (COVID-19)” were the most frequent in article titles.Originality/valueIn a circumstance that the world is suffering from a COVID-19 pandemic and all scientists are conducting various researches to discover vaccines, medicines and new treatment methods, scientometric studies, and analysis of social networks of COVID-19 publications to be able to specify the synergy rate and the scientific collaboration networks, are not only innovative and original but also of great importance and priority; SNA tools along with the synergy indicator is capable of visualizing the complicated and multifaceted pattern of scientific collaboration in COVID-19. As a result, analyses can help identify existing capacities and define a new space for using COVID-19 researchers’ capabilities.

The study aims to find the quality of research papers published in the domain of entrepreneurship in India. This study covers 100 research papers. A standardized measurement tool developed by the earlier researchers was used to evaluate the research quality. The data compiled using the measurement tool were analyzed with the support of the SPSS. The statistical tools such as descriptive statistics, Friedman’s test, factor analysis, two-sample ‘t’ test, and ANOVA are applied to analyze the data. The study findings reported that the quality of research papers published in the field of entrepreneurship is not up to the quality standards. The quality of multiple-author papers is better than single-author papers. Similarly, the quality of papers published by foreign authors is comparatively better than Indian authors. Further, the quality of papers published with the combination of foreign and Indian authors is substantially good. The quality of papers published in foreign journals is higher as compared with Indian journals. Further, the standard of papers published under the qualitative approach was comparatively better than the quantitative approach. The authors developed a Conceptual Model of Process and Product of Research (YOVA model). This model clearly shows that the whole research process yields six levels of research products. The study recommended that the researchers need to go for international collaborations to improve the quality of the publication. The funding agencies, higher learning institutions and research institutions should focus on enhancing research infrastructure. The study examined the validity of research articles searched by novice researchers in India in Google by using keywords related to entrepreneurship and, as such this non-focused approach is a big impediment to quality research.

The article deals with matla‘ (first she‘r – two-line couplet – in a ghazal) of the first ghazal in the Divan by Mirza Asadulla-khan Ghalib (1792–1869) written in Urdu. One of the items usually commented there is the garment made of paper (kāġhażī peirahan). It used to be worn in ancient times by the complainers who appealed to the ruler. The range of complaints in the poetry of Ghalib as well as by other Urdu and Persian poets was wide, however, stable. “Wearing paper clothes”, the petitioner complained about the Almighty, the ill fate, a cruel girl, a lack of understanding of the petitioner’s poetry and the poor remuneration, and finally, about the poet himself, who “dressed” his poems in the paper. Тhese diverse situations form the elements of the literary motif as well as its context and are common in the Persian verses by the predecessors of Ghalib and also himself. Its analysis helps to understand all levels of meaning inherent in one of the most difficult-to-interpret texts by Ghalib.