Search

Abstract Due to the limited hydrophobic properties of porcelain insulators, applying anti-pollution flashover coatings is crucial to enhance their functionality. This research outlines a classification system for assessing contamination levels on 22 kV porcelain insulators, both with and without coatings. It synthesizes six classification criteria derived through both numerical simulations and experimental studies to effectively gauge contamination severity. The study examined insulators treated with Room Temperature Vulcanizing (RTV) silicone under three different conditions: uncoated, partially coated, and fully coated. Additionally, the research assessed the effects of humidity on these polluted insulators to understand environmental impacts on their performance. The criteria, which are the flashover voltage (x1), fifth to third harmonics of leakage current (x2), maximum electric field (x3), total harmonic index (x4), insulation resistance (x5) and dielectric loss (x6), were proposed for evaluating the insulator’s string condition. The finite element method (FEM) was used to simulate an electric field. Then, based on the proposed criteria, the performances of the Random Forest (RF), Support Vector Machine (SVM), K-Nearest Neighbor (KNN), and Multi-layer Perceptron (MLP) have been trained and compared to classify polluted insulator conditions with and without coating. The established criteria facilitate precise monitoring of the condition of high-voltage insulators, ensuring quick and effective responses that support the stability of the electrical power system.

Abstract The monitoring of leakage current (LC) and voltage characteristics in transmission line insulators is regarded as a good technique for anticipating the physical state of in-service insulators. In the current work, the temporal and frequency characteristics of LC and voltage under various situations were derived for assessing the health condition of porcelain, glass, and silicone rubber insulators. The contamination severity indicated by soluble deposit density, wetting level (Wt), non-soluble deposit density, and uneven pollution distribution (Pu/PL) were chosen as the environmental factors that impact the insulators. Six criteria were utilized to evaluate the physical state of the insulators, with four of those derived from the LC signal in the time domain, namely, the LC signal peak (C1), the phase shift between applied voltage and LC (C2), the LC signal slope between two consecutive peaks (C3), and the crest factor (C4). The remaining two indices, namely, the total harmonics distribution (C5) and the harmonics ratio indicator (C6), were obtained from the frequency domain of the LC signal. In addition, the flashover voltage index (C7) was also employed. The LC indicators were then classified based on the laboratory test results to reflect the physical state of the insulators. The findings revealed that the proposed indicators had an important impact in determining the physical state of the insulators. Furthermore, a confusion matrix was created for the test and prediction data using the suggested indicators to determine the effectiveness of each indicator.

SONAR signal processing plays an indispensable role when it comes to parameter estimation of Direction of Arrival (DOA) of acoustic plane waves for closely spaced target exclusively under severe noisy environments. Resolution performance of classical MUSIC and ESPRIT algorithms and other subspace-based algorithms decreases under scenarios like low SNR, smaller number of snapshots and closely spaced targets. In this study, optimization strength of swarm intelligence of Cuckoo Search Algorithm (CSA) is accomplished for viable DOA estimation in different scenarios of underwater environment using a Uniform Linear Array (ULA). Higher resolution for closely spaced targets is achieved using smaller number of snapshots viably with CSA by investigating global minima of the highly nonlinear cost function of ULA. Performance analysis of CSA for different number of targets employing estimation accuracy, higher resolution, variance analysis, frequency distribution of RMSE over the monte Carlo runs and robustness against noise in the presence of additive-white Gaussian measurement noise is achieved. Comparative studies of CSA with Root MUSIC and ESPRIT along with Crammer Rao Bound analysis witnesses better results for estimating DOA parameters which are further endorsed from the results of Monte Carlo simulations.