Search

Dissolved silica is a major concern for a variety of industrial processes owing to its tendency to form complex scales that severely deteriorate system performance. In this work, we present a pretreatment technology using a Joule-heated sponge to rapidly remove silica from saline waters through adsorption, thereby effectively mitigating silica scaling in subsequent membrane desalination processes. The adsorbent sponge is fabricated by functionalizing two-dimensional layered double hydroxide (LDH) nanosheets on a porous, conductive stainless-steel sponge. With the application of an external voltage of 4 V, the Joule-heated sponge achieves 85% silica removal and 95% sponge regeneration within 15 min, which is much more efficient than its counterpart without Joule-heating (360 min for silica adsorption and 90 min for sponge regeneration). Material characterization and reaction kinetics analysis reveal that electrostatic interactions and "memory effect"-induced intercalation are the primary mechanisms for silica removal by the LDH nanosheets. Moreover, Joule-heating reduces the boundary layer resistance on nanosheets and facilitates intraparticle diffusion of dissolved silica, thereby increasing silica removal kinetics. Joule-heating also enhances the release of silicate ions during the regeneration stage through exchange with the surrounding anions (OH- or CO32-), resulting in a more efficient sponge regeneration. Pretreatment of silica-rich feedwaters by the Joule-heated sponge effectively reduces reverse osmosis membrane scaling by amorphous silica scale, demonstrating great potential for silica scaling control in a broad range of engineered processes.

Membrane separation has enjoyed tremendous advances in relevant material and engineering sciences, making it the fastest growing technology in water treatment. Although membranes as a broad-spectrum physical barrier have great advantages over conventional treatment processes in a myriad of applications, the need for higher selectivity and specificity in membrane separation is rising as we move to target contaminants at trace concentrations and to recover valuable chemicals from wastewater with low energy consumption. In this review, we discuss the drivers, fundamental science, and potential enabling materials for high selectivity membranes, as well as their applications in different water treatment processes. Membrane materials and processes that show promise to achieve high selectivity for water, ions, and small molecules—as well as the mechanisms involved—are highlighted. We further identify practical needs, knowledge gaps, and technological barriers in both material development and process design for high selectivity membrane processes. Finally, we discuss research priorities in the context of existing and future water supply paradigms.

The transport of hydrated ions across nanochannels is central to biological systems and membrane-based applications, yet little is known about their hydrated structure during transport due to the absence of in situ characterization techniques. Herein, we report experimentally resolved ion dehydration during transmembrane transport using modified in situ liquid ToF-SIMS in combination with MD simulations for a mechanistic reasoning. Notably, complete dehydration was not necessary for transport to occur across membranes with sub-nanometer pores. Partial shedding of water molecules from ion solvation shells, observed as a decrease in the average hydration number, allowed the alkali-metal ions studied here (lithium, sodium, and potassium) to permeate membranes with pores smaller than their solvated size. We find that ions generally cannot hold more than two water molecules during this sterically limited transport. In nanopores larger than the size of the solvation shell, we show that ionic mobility governs the ion hydration number distribution. Viscous effects, such as interactions with carboxyl groups inside the membrane, preferentially hinder the transport of the mono- and dihydrates. Our novel technique for studying ion solvation in situ represents a significant technological leap for the nanofluidics field and may enable important advances in ion separation, biosensing, and battery applications.

Hazardous gases threaten human health and the environment due to their toxicity and flammability. Managing such risks requires reliable gas detection techniques. However, accurate detection of target environmental gases remains challenging. Recent advances in materials science have enabled the combination of molecular separation membranes with chemical sensors to achieve high selectivity in the detection of target gas molecules. Herein, we discuss the underlying gas separation mechanisms for different types of membrane overlayers, including graphene oxide, metal-organic frameworks, and metal oxides, as well as their integration with sensing materials. Furthermore, we discuss the relationship between sensing performance and surface chemistry, catalytic properties, and membrane nanostructure. We conclude by highlighting future directions for selective detection of environmental gas species.

Engineered nanoporous materials have been extensively employed in the environmental field to take advantage of increased surface area and tunable size exclusion. Beyond those benefits, recent studi...

Electrified membranes (EMs) have the potential to address inherent limitations of conventional membrane technologies. Recent studies have demonstrated that EMs exhibit enhanced functions beyond sep...

To combat biofouling on membranes, diverse nanostructures of titanium dioxide (TiO2) have emerged as effective antimicrobial coatings due to TiO2's abilities to transport charge and photoinduce oxidation. However, TiO2 composite polymeric membranes synthesized using traditional methods of growing crystals have proven chemically unstable, with loss of coating and diminishing antimicrobial performance. Thus, new fabrication methods to enhance durability and efficacy should be considered. In this work, we propose a stepwise approach to construct a stable, uniform TiO2 nanoarray of regularly spaced, aligned crystals on the surface of a polytetrafluoroethylene ultrafiltration membrane using precisely controlled atomic layer deposition (ALD) followed by solvothermal deposition. We demonstrate that ALD can uniformly seed TiO2 nanoparticles on the membrane surface with atomic-scale precision. Subsequently, solvothermal deposition assembles and aligns a uniform TiO2 nanoarray forest. In the presence of sunlight, this TiO2 nanoarray effectively inactivates any deposited bacteria, increasing flux recovery after membrane cleaning. By systematically investigating this antimicrobial activity, we found that TiO2 both physically damages cell membranes as well as produces reactive oxygen species in the presence of sunlight that inactivate bacteria. Our study provides an effective bottom-up synthesis scheme to optimize and tailor antifouling TiO2 coatings for ultrafiltration and other surfaces for a wide range of applications.

Within the last decade, in addition to water desalination, capacitive deionization (CDI) has been used for resource recovery and selective separation of target ions in multicomponent solutions. In this review, we summarize the mechanisms of selective ion removal utilizing different electrode materials, carbon and non-carbon together with or without membranes, from a mixture of salt solutions, by a detailed review of the literature from the beginning until the state-of-the-art. In this venture, we review the advances made in the preparation, theoretical understanding, and the role of electrodes and membranes. We also describe how ion selectivity has been defined and used in literature. Finally, we present a theory of selective ion removal for intercalation materials that, for the first time, considers mixtures of different cations, evidencing the time-dependent selectivity of these electrodes.

Membrane desalination is a promising technology for addressing the global challenge of water scarcity by augmenting fresh water supply. Continuous progress in this technology relies on development of membrane materials. The state-of-the-art membranes used in a wide range of desalination applications are polyamide thin-film composite (TFC) membranes which are formed by interfacial polymerization (IP). Despite the wide use of such membranes in desalination, their real-world application is still hampered by several technical obstacles. These challenges of the TFC membranes largely stem from the inherent limitations of the polyamide chemistry, as well as the IP reaction mechanisms. In the past decade, we have witnessed substantial progress in the understanding of polyamide formation mechanisms and the development of new IP strategies that can potentially lead to the redesign of TFC membranes. In this Tutorial, we first present a brief history of the development of desalination membranes and highlight the major challenges of the existing TFC membranes. We then proceed to discuss the pros and cons of emerging IP-based fabrication strategies aiming at improving the performance of TFC membranes. Next, we present technical obstacles and recent efforts in the characterization of TFC membranes to enable fundamental understanding of relevant mechanisms. We conclude with a discussion of the current gap between industrial needs and academic research in designing high-performance TFC membranes, and provide an outlook on future research directions for advancing IP-based fabrication processes.

Emerging organic contaminants (EOCs) discharged from wastewater effluents into drinking water resources are of growing concern for human health and the environment. In this study, we demonstrate th...

Surface heating membrane distillation overcomes several limitations inherent in conventional membrane distillation technology. Here we report a successful effort to grow in situ a hexagonal boron nitride (hBN) nanocoating on a stainless-steel wire cloth (hBN-SSWC), and its application as a scalable electrothermal heating material in surface heating membrane distillation. The novel hBN-SSWC provides superior vapour permeability, thermal conductivity, electrical insulation and anticorrosion properties, all of which are critical for the long-term surface heating membrane distillation performance, particularly with hypersaline solutions. By simply attaching hBN-SSWC to a commercial membrane and providing power with an a.c. supply at household frequency, we demonstrate that hBN-SSWC is able to support an ultrahigh power intensity (50 kW m−2) to desalinate hypersaline solutions with exceptionally high water flux (and throughput), single-pass water recovery and heat utilization efficiency while maintaining excellent material stability. We also demonstrate the exceptional performance of hBN-SSWC in a scalable and compact spiral-wound electrothermal membrane distillation module. A hexagonal boron nitride nanocoating grown directly on a stainless-steel mesh enables ultrahigh power input intensity in an electrothermal membrane distillation system to desalinate hypersaline solutions with exceptionally high water flux, single-pass water recovery and heat utilization efficiency.

Chlorination is a common practice to prevent biofouling in municipal water supplies, wastewater reuse and seawater desalination. However, polyamide thin-film composite reverse osmosis membranes—the premier technology for desalination and clean-water production—structurally deteriorate when continually exposed to chlorine species. Here, we use layer-by-layer interfacial polymerization of 3,5-dihydroxybenzoic acid with trimesoyl chloride to fabricate a polyester thin-film composite reverse osmosis membrane that is chlorine-resistant in neutral and acidic conditions. Strong steric hindrance and an electron-withdrawing group effectively prevent direct aromatic chlorination, and residual OH groups capped with isophthaloyl dichloride preclude reaction with active chlorine. The poly(isophthalester) membrane exhibits high salt rejection (99.1 ± 0.2%) and water permeability (2.97 ± 0.13 l m−2 h−1 bar−1), even after demonstrating biofouling prevention with chlorine (50 mg l−1 of NaOCl for 15 min). We anticipate that our chlorine-resistant membrane will greatly advance reverse osmosis desalination as a sustainable technology to meet the global challenge of water supply. Reverse osmosis membranes are the primary technology used for desalination and wastewater recycling, but they are prone to biofouling and subsequent performance deterioration due to poor tolerance to disinfecting agents such as chlorine. Here a chlorine-resistant polyester reverse osmosis membrane is developed to prevent biofouling and increase the sustainability of desalination and wastewater reuse.

Transmembrane protein channels, including ion channels and aquaporins that are responsible for fast and selective transport of water, have inspired membrane scientists to exploit and mimic their performance in membrane technologies. These biomimetic membranes comprise discrete nanochannels aligned within amphiphilic matrices on a robust support. While biological components have been used directly, extensive work has also been conducted to produce stable synthetic mimics of protein channels and lipid bilayers. However, the experimental performance of biomimetic membranes remains far below that of biological membranes. In this review, we critically assess the status and potential of biomimetic desalination membranes. We first review channel chemistries and their transport behavior, identifying key characteristics to optimize water permeability and salt rejection. We compare various channel types within an industrial context, considering transport performance, processability, and stability. Through a re-examination of previous vesicular stopped-flow studies, we demonstrate that incorrect permeability equations result in an overestimation of the water permeability of nanochannels. We find in particular that the most optimized aquaporin-bearing bilayer had a pure water permeability of 2.1 L m-2 h-1 bar-1, which is comparable to that of current state-of-the-art polymeric desalination membranes. Through a quantitative assessment of biomimetic membrane formats, we analytically show that formats incorporating intact vesicles offer minimal benefit, whereas planar biomimetic selective layers could allow for dramatically improved salt rejections. We then show that the persistence of nanoscale defects explains observed subpar performance. We conclude with a discussion on optimal strategies for minimizing these defects, which could enable breakthrough performance.

Increased demand for highly selective and energy-efficient separations processes has stimulated substantial interest in emerging two-dimensional (2D) nanomaterials as a potential platform for next-generation membranes. However, persistently poor separation performance continues to hinder the viability of many novel 2D-nanosheet membranes in desalination applications. In this study, we examine the role of the lamellar structure of 2D membranes on their performance. Using self-fabricated molybdenum disulfide (MoS2) membranes as a platform, we show that the separation layer of 2D nanosheet frameworks not only fails to demonstrate water-salt selectivity but also exhibits low rejection toward dye molecules. Moreover, the MoS2 membranes possess a molecular weight cutoff comparable to its underlying porous support, implying negligible selectivity of the MoS2 layer. By tuning the nanochannel size through intercalation with amphiphilic molecules and analyzing mass transport in the lamellar structure using Monte Carlo simulations, we reveal that small imperfections in the stacking of MoS2 nanosheets result in the formation of catastrophic microporous defects. These defects lead to a precipitous reduction in the selectivity of the lamellar structure by negating the interlayer sieving mechanism that prevents the passage of large penetrants. Notably, the imperfect stacking of nanosheets in the MoS2 membrane was further verified using 2D X-ray diffraction measurements. We conclude that developing a well-controlled fabrication process, in which the lamellar structure can be carefully tuned, is critical to achieving defect-free and highly selective 2D desalination membranes.

Synthetic membranes with pores at the subnanometre scale are at the core of processes for separating solutes from water, such as water purification and desalination. While these membrane processes have achieved substantial industrial success, the capability of state-of-the-art membranes to selectively separate a single solute from a mixture of solutes is limited. Such high-precision separation would enable fit-for-purpose treatment, improving the sustainability of current water-treatment processes and opening doors for new applications of membrane technologies. Herein, we introduce the challenges of state-of-the-art membranes with subnanometre pores to achieve high selectivity between solutes. We then analyse experimental and theoretical literature to discuss the molecular-level mechanisms that contribute to energy barriers for solute transport through subnanometre pores. We conclude by providing principles and guidelines for designing next-generation single-species selective membranes that are inspired by ion-selective biological channels.

Separating molecules or ions with sub-Angstrom scale precision is important but technically challenging. Achieving such a precise separation using membranes requires Angstrom scale pores with a high level of pore size uniformity. Herein, we demonstrate that precise solute-solute separation can be achieved using polyamide membranes formed via surfactant-assembly regulated interfacial polymerization (SARIP). The dynamic, self-assembled network of surfactants facilitates faster and more homogeneous diffusion of amine monomers across the water/hexane interface during interfacial polymerization, thereby forming a polyamide active layer with more uniform sub-nanometre pores compared to those formed via conventional interfacial polymerization. The polyamide membrane formed by SARIP exhibits highly size-dependent sieving of solutes, yielding a step-wise transition from low rejection to near-perfect rejection over a solute size range smaller than half Angstrom. SARIP represents an approach for the scalable fabrication of ultra-selective membranes with uniform nanopores for precise separation of ions and small solutes., Separating molecules or ions with sub-Angstrom scale precision is important but technically challenging. Here, the authors demonstrate that precise solute-solute separation can be achieved using polyamide membranes formed via surfactant-assembly regulated interfacial polymerization.

Manganese(III/IV) oxide minerals are known to spontaneously degrade organic pollutants in nature. However, the kinetics are too slow to be useful for engineered water treatment processes. Herein, we demonstrate that nanoscale Mn3O4 particles under nanoscale spatial confinement (down to 3-5 nm) can significantly accelerate the kinetics of pollutant degradation, nearly 3 orders of magnitude faster compared to the same reaction in the unconfined bulk phase. We first employed an anodized aluminum oxide scaffold with uniform channel dimensions for experimental and computational studies. We found that the observed kinetic enhancement resulted from the increased surface area of catalysts exposed to the reaction, as well as the increased local proton concentration at the Mn3O4 surface and subsequent acceleration of acid-catalyzed reactions even at neutral pH in bulk. We further demonstrate that a reactive Mn3O4-functionalized ceramic ultrafiltration membrane, a more suitable scaffold for realistic water treatment, achieved nearly complete removal of various phenolic and aniline pollutants, operated under a common ultrafiltration water flux. Our findings mark an important advance toward the development of catalytic membranes that can degrade pollutants in addition to their intrinsic function as a physical separation barrier, especially since they are based on accelerating natural catalytic pathways that do not require any chemical addition.

Since the advent of thin-film composite polyamide membranes brought forth a breakthrough in desalination and water purification membranes nearly half a century ago, recent years have only witnessed marginal improvements in the water-salt selectivity of these membranes. The slow progression is partly attributable to limited understanding of membrane synthesis–structure–performance relationships. A centralized archive of reverse osmosis membrane (RO) characterization data may lead to a shared understanding of features that maximize RO performance and unify research efforts. The Open Membrane Database (OMD), which can be found at www.openmembranedatabase.org , is a growing database of over 600 water purification and desalination membranes that are sourced from peer-reviewed journals, patents, and commercial product data. Here, we outline the detailed functionality of the database, the transport theory underlying the membrane performance calculations, and best practices for membrane performance testing and reporting. The user-sourced, open-access database may be used to benchmark novel RO membranes against the state of the art, conduct meta-analyses, and develop synthesis–structure–performance relationships, each of which will be critical to advancing membrane development.

ispartof: ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS vol:8 issue:9 pages:818-824 status: published

Minimum and zero liquid discharge (MLD/ZLD) are emerging brine management strategies that attract heightened attention. Although conventional reverse osmosis (RO) can improve the energy efficiency of MLD/ZLD processes, its application is limited by the maximum hydraulic pressure (ΔPmax) that can be applied in current membrane modules. To overcome such limitation, novel RO-based technologies, including osmotically assisted RO (OARO) and low-salt-rejection RO (LSRRO), have been proposed. Herein, we utilize process modeling to systematically compare the energy consumption of OARO and LSRRO for MLD/ZLD applications. Our modeling results show that the specific energy consumption (SEC) of LSRRO is lower (by up to ∼30%) than that of OARO for concentrating moderately saline feed waters ( ∼70,000 mg/L TDS). However, by implementing more stages and/or an elevated ΔPmax, LSRRO has the potential to outperform OARO energetically for treating high-salinity feed waters. Notably, the SEC of both OARO and LSRRO could be 50% lower than that of mechanical vapor compressor, the commonly used brine concentrator in MLD/ZLD applications. We conclude with a discussion on the practicability of OARO and LSRRO based on membrane module availability and capital cost, suggesting that LSRRO could potentially be more feasible than OARO.

Surface functionalization using two-dimensional (2D) graphene oxide (GO) materials is a promising technique to enhance the biofouling resistance of membranes used in water purification and reuse. However, the role of GO exposure, which is crucial for the contact-mediated toxicity mechanism, has not been well evaluated or elucidated in previous studies. Herein, we employ bioinspired polydopamine chemistry to fabricate GO-functionalized membranes through two strategies: coating and blending. The two types of GO-functionalized membranes displayed comparable roughness, hydrophilicity, water permeability, and solute retention properties but different degrees of GO nanosheet exposure on the membrane surface. When in contact with the model bacterium, Escherichia coli, the GO-coated membrane exhibited enhanced biofouling resistance compared to that of the GO-blended membrane, as evidenced by lower viable cells in static adsorption experiments, and lower water flux decline and higher flux recovery in dynamic biofouling experiments. Moreover, the development of biofilm on the GO-coated membrane was also inhibited to a greater extent than on the GO-blended membrane. Taken together, our findings indicate the paramount importance of GO exposure on the membrane surface in conferring antibacterial activity and biofouling resistance, which should be considered in the future design of antibiofouling membranes using 2D nanomaterials.

Nanofiltration membranes have limited ion-ion selectivity in water treatment applications, especially when separating ions with similar size and charge. To achieve greater size-based selectivity in nanofiltration, more control of pore structure is required during membrane fabrication. We demonstrate how to tailor membrane pore size and thickness using polyelectrolyte layer-by-layer assembly by alternately applying two strong polyelectrolytes, PDADMAC and PSS, to a polysulfone substrate while systematically controlling the polyelectrolyte and salt concentrations in the deposition solution. Results suggest that increasing polyelectrolyte concentration or salt concentration in the deposition solution increases polyelectrolyte multilayer thickness, but the effects on pore size may be categorized into two distinct regimes. In the first growth regime, increasing polyelectrolyte concentration in the deposition solution led to larger polymer deposition rates and smaller pore sizes. In the second growth regime, increasing polyelectrolyte concentration produced larger pore sizes. We attribute the second regime to less adsorbed polyelectrolyte on the membrane and/or less coiled polymer chains as a result of changing polyelectrolyte-salt interactions. Overall, results show that pore size modification is achievable using layer-by-layer assembly by tuning polyelectrolyte-salt interactions and can be used to study and improve size-based selectivity in membrane separation processes.

We explored the mechanisms governing the selectivity of anion- and cation-exchange membranes for the transport of four monovalent anions (i.e., fluoride, chloride, bromide, and nitrate) and four monovalent cations (i.e., sodium, potassium, cesium, and ammonium), respectively. Our ion adsorption and transport tests with mixed ion solutions reveal that an ion with larger ionic radius and lower hydration energy is more favorably adsorbed onto the ion-exchange membrane but diffuses more slowly through the polymer matrix compared to an ion with smaller ionic radius and higher hydration energy. Individual anion (as sodium salt) or cation (as chloride salt) permeation tests at different temperatures were performed to evaluate the activation behavior of ion transport through the ion-exchange membranes by calculating the energy barrier and pre-exponential factor (i.e., the ion flux when the energy barrier is negligible) for ion transport from an Arrhenius-type equation. Our results show that an ion with smaller ionic radius and higher hydration energy experiences higher energy barrier (e.g., fluoride, 10.3 kcal mol−1) and possesses higher pre-exponential factor compared to an ion with larger ionic radius and lower hydration energy (e.g., bromide, 4.6 kcal mol−1). This correlation corroborates our main hypothesis that the activation behavior observed for ion transport is a result of ion dehydration at the water-membrane interface. Our proposed ion selectivity mechanism elucidates how ion dehydration governs the extent of ion permeation into the membrane and the subsequent transport through the charged polymer matrix. Future membrane design that promotes dehydration of target ions is challenging but can result in unprecedented ion selectivity.

Forward osmosis (FO) can potentially treat textile wastewaters with less fouling than pressure-driven membrane processes such as reverse osmosis and nanofiltration. However, conventional FO membranes with asymmetric architecture experience severe flux decline caused by internal concentration polarization and fouling as dye molecules accumulate on the membrane surface. In this study, we present a new strategy for concentrating dye by using a self-standing, support-free FO membrane with a symmetric structure. The membrane was fabricated by a facile solution-casting approach based on a poly(triazole- co-oxadiazole- co-hydrazine) (PTAODH) skeleton. Due to its dense architecture, ultrasmooth surface, and high negative surface charge, the PTAODH membrane exhibits excellent FO performance with minimal fouling, low reverse salt flux, and negligible dye passage to the draw solution side. Cleaning with a 40% alcohol solution, after achieving a concentration factor of ∼10, resulted in high flux recovery ratio (98.7%) for the PTAODH membrane, whereas significant damage to the active layers of two commercial FO membranes was observed. Moreover, due to the existence of cytotoxic oxadiazole and triazole moieties in the polymer structure, our PTAODH membrane exhibited an outstanding antibacterial property with two model bacteria. Our results demonstrate the promising application of the symmetric PTAODH membrane for the concentration of textile wastewaters and its superior antifouling performance compared to state-of-the-art commercial FO membranes.

Surface modification with bactericides is a promising approach to imparting membrane materials with biofouling resistance. However, chemical modification of membranes made from inert materials, such as polyvinylidene fluoride (PVDF) and polysulfone, is challenging because of the absence of reactive functional groups on these materials. In this study, we develop a facile procedure using benzophenone as an anchor to graft biocidal graphene oxide (GO) to chemically inactive membrane materials. GO nanosheets are first functionalized with benzophenone through an amide coupling reaction. Then, benzophenone-functionalized GO nanosheets are irreversibly grafted to the inert membrane surfaces via benzophenone-initiated cross-linking under ultraviolet irradiation. The binding of GO to the membrane surface is confirmed by scanning electron microscopy and Raman spectroscopy. When exposed to a model bacterium (Escherichia coli), GO-functionalized PVDF and polysulfone membranes exhibit strong antibacterial activity, re...

Asymmetric membranes with a thin, small pore size upper layer have the potential to facilitate a high vapor flux while maintaining high liquid entry pressure, which is critical for membrane distillation (MD) and thermo-osmotic energy conversion (TOEC) processes. Here, asymmetric mixed cellulose ultrafiltration membranes were modified with perfluorodecyltrichlorosilane to produce 50 nm and 25 nm pore size membranes with highly hydrophobic surfaces (contact angle >115°) and unprecedented liquid entry pressures >24 bar. The 50 nm membrane performance was evaluated in a series of MD and TOEC mode experiments, where the membrane dense layer faces the hot feed stream or the cold permeate stream, respectively. Our results demonstrate that the membrane water vapor permeability coefficient is significantly higher when operating in MD mode (1.7 × 10−7 kg m−2 s−1 Pa−1) compared to TOEC mode (0.9 × 10−7 kg m−2 s−1 Pa−1) at a similar temperature difference of 39 °C, suggesting an additional resistance to vapor flux in TOEC mode. We developed a model for mass and heat transfer through the membrane to explain the change in performance due to reversing the asymmetric membrane orientation. As expected, the model and the experimental results show a linear increase in the water vapor permeability coefficient with respect to temperature difference across the membrane for the MD orientation. However, for the TOEC orientation, the water vapor permeability coefficient was relatively constant across all the temperature differences investigated. Our results predict that the additional mass transport resistances in TOEC mode decrease as the transmembrane temperature gradient decreases. We conclude with a discussion on the implications of using asymmetric membranes for MD and TOEC processes.

Three-dimensional macrostructures (3DMs) of graphene and graphene oxide are being developed for fast and efficient removal of contaminants from water and air. The large specific surface area, versatile surface chemistry and exceptional mechanical properties of graphene-based nanosheets enable the formation of robust and high-performance 3DMs such as sponges, membranes, beads and fibres. However, little is known about the relationship between the materials properties of graphene-based 3DMs and their environmental performance. In this Review, we summarize the self-assembly and environmental applications of graphene-based 3DMs in removing contaminants from water and air. We also develop the critical link between the materials properties of 3DMs and their environmental performance, and identify the key parameters that influence their capacities for contaminant removal.

Microbial contamination and biofilm formation present major challenges in numerous applications. Many types of nanoparticles possess high antibacterial activity and thus are being investigated to combat environmental microbial contamination, limit bacterial deposition, and inhibit or destroy biofilms. In addition to finding nanoparticles with high and broad antibacterial activity, the synthesis of nanoparticles must also be sustainable and the nanoparticles should have low toxicity and low environmental impact. In this study, we developed a simple one-step probe sonication method to synthesize a ZnO nanoparticle functionalized reduced graphene oxide (rGO–ZnO) nanocomposite by exfoliating oxidized graphite in the presence of Zn2+. The antibacterial activity of the nanocomposite was higher than that of graphene oxide (GO) and rGO against Gram-negative (Escherichia coli and Serratia marcescens) and Gram-positive (Bacillus subtilis) bacteria. Direct intracellular reactive oxygen species (ROS) and Zn2+ leaching measurements indicated that the high antibacterial activity against different bacteria of the nanocomposite arises from the formation of ROS, whereas the effect of Zn2+ is negligible. Furthermore, incorporating rGO–ZnO nanocomposite into a polyethersulfone (PES) membrane inhibited biofilm growth compared with a pristine PES membrane. Leaching experiments of Zn2+ from the incorporated rGO–ZnO membrane during synthetic wastewater filtration revealed that Zn2+ concentration in the effluent was below the environmental standards for potable and non-potable uses. Our research presents an effective, fast, and low-cost preparation method for developing nanocomposites with high antimicrobial activities. Also, it shows that a nanocomposite incorporated polymeric membrane can be safely applied for water and wastewater treatment with minimum environmental impact.

Heterogeneous advanced oxidation processes (AOPs) allow for the destruction of aqueous organic pollutants via oxidation by hydroxyl radicals (•OH). However, practical treatment scenarios suffer from the low availability of short-lived •OH in aqueous bulk, due to both mass transfer limitations and quenching by water constituents, such as natural organic matter (NOM). Herein, we overcome these challenges by loading iron oxychloride catalysts within the pores of a ceramic ultrafiltration membrane, resulting in an internal heterogeneous Fenton reaction that can degrade organics in complex water matrices with pH up to 6.2. With •OH confined inside the nanopores (∼ 20 nm), this membrane reactor completely removed various organic pollutants with water fluxes of up to 100 L m-2 h-1 (equivalent to a retention time of 10 s). This membrane, with a pore size that excludes NOM (>300 kDa), selectively exposed smaller organics to •OH within the pores under confinement and showed excellent resiliency to representative water matrices (simulated surface water and sand filtration effluent samples). Moreover, the membrane exhibited sustained AOPs (>24 h) and could be regenerated for multiple cycles. Our results suggest the feasibility of exploiting ultrafiltration membrane-based AOP platforms for organic pollutant degradation in complex water scenarios.

Synthetic polymer membranes are enabling components in key technologies at the water-energy nexus, including desalination and energy conversion, because of their high water/salt selectivity or ionic conductivity. However, many applications at the water-energy nexus require ion selectivity, or separation of specific ionic species from other similar species. Here, the ion selectivity of conventional polymeric membrane materials is assessed and recent progress in enhancing selective transport via tailored free volume elements and ion-membrane interactions is described. In view of the limitations of polymeric membranes, three material classes-porous crystalline materials, 2D materials, and discrete biomimetic channels-are highlighted as possible candidates for ion-selective membranes owing to their molecular-level control over physical and chemical properties. Lastly, research directions and critical challenges for developing bioinspired membranes with molecular recognition are provided.

In recent years, the development of nanopore-based membranes has revitalized the prospect of harvesting salinity gradient (blue) energy. In this study, we systematically analyze the energetic performance of nanopore-based power generation (NPG) at various process scales, beginning with a single nanopore, followed by a multipore membrane coupon, and ending with a full-scale system. We confirm the high power densities attainable by a single nanopore and demonstrate that, at the coupon scale and above, concentration polarization severely hinders the power density of NPG, revealing the common, yet significant, error in linearly extrapolating single-pore performance to multipore membranes. Through our consideration of concentration polarization, we also importantly show that the development of materials with exceptional nanopore properties provides limited enhancement of practical process performance. For a full-scale NPG membrane module, we find an inherent tradeoff between power density and thermodynamic energy efficiency, whereby achieving a high power density sacrifices the energy efficiency. Furthermore, we derive a simple expression for the theoretical maximum energy efficiency of NPG, showing it is solely related to the membrane selectivity (i.e., S2/2). Through this relation, it is apparent that the energy efficiency of NPG is limited to only 50% (for a completely selective membrane, i.e., S = 1), reinforcing our optimistic full-scale simulations which result in a (practical) maximum energy efficiency of 42%. Finally, we assess the net extractable energy of a full-scale NPG system which mixes river water and seawater by including the energy losses from pretreatment and pumping, revealing that the NPG process-both in its current state of development and in the case of highly optimistic performance with minimized external energy losses-is not viable for power generation.

A fundamental study elucidates the mechanisms underlying selective ion transport through desalination membranes., State-of-the-art desalination membranes exhibit high water-salt selectivity, but their ability to discriminate between ions is limited. Elucidating the fundamental mechanisms underlying ion transport and selectivity in subnanometer pores is therefore imperative for the development of ion-selective membranes. Here, we compare the overall energy barrier for salt transport and energy barriers for individual ion transport, showing that cations and anions traverse the membrane pore in an independent manner. Supported by density functional theory simulations, we demonstrate that electrostatic interactions between permeating counterion and fixed charges on the membrane substantially hinder intrapore diffusion. Furthermore, using quartz crystal microbalance, we break down the contributions of partitioning at the pore mouth and intrapore diffusion to the overall energy barrier for salt transport. Overall, our results indicate that intrapore diffusion governs salt transport through subnanometer pores due to ion-pore wall interactions, providing the scientific base for the design of membranes with high ion-ion selectivity.

The importance of singlet oxygen (1O2) in the environmental and biomedical fields has motivated research for effective 1O2 production. Electrocatalytic processes hold great potential for highly-automated and scalable 1O2 synthesis, but they are energy- and chemical-intensive. Herein, we present a Janus electrocatalytic membrane realizing ultra-efficient 1O2 production (6.9 mmol per m3 of permeate) and very low energy consumption (13.3 Wh per m3 of permeate) via a fast, flow-through electro-filtration process without the addition of chemical precursors. We confirm that a superoxide-mediated chain reaction, initiated by electrocatalytic oxygen reduction on the cathodic membrane side and subsequently terminated by H2O2 oxidation on the anodic membrane side, is crucial for 1O2 generation. We further demonstrate that the high 1O2 production efficiency is mainly attributable to the enhanced mass and charge transfer imparted by nano- and micro-confinement effects within the porous membrane structure. Our findings highlight a new electro-filtration strategy and an innovative reactive membrane design for synthesizing 1O2 for a broad range of potential applications including environmental remediation., Electrocatalytic processes are promising for automated and scalable synthesis of singlet oxygen, but they are energy- and chemical-intensive. Here the authors present a Janus electrocatalytic membrane that selectively produces singlet oxygen with low energy consumption and free of chemical precursors.

Reactive membranes based on hydroxyl radical generation are hindered by the need for chemical dosing and complicated module and material design. Herein, we utilize an electrochemical approach featuring in situ generation of reactive (radical) chlorine species (RCS) through anodization of chloride ions for membrane self-cleaning. A hybridized carbon nanotube (CNT)-functionalized ceramic membrane (h-CNT/CM), possessing high hydrophilicity, permeability, and conductivity, was fabricated. Using carbamazepine (CBZ) as a probe, we confirmed the presence of RCS in the electrified h-CNT/CM. The rapid and complete degradation of CBZ in a single-pass ultrafiltration indicates a high localized RCS concentration within the three-dimensional porous CNT interwoven layer. We further demonstrate that the electrogeneration of RCS is a critical prestep for free chlorine (HClO and ClO-) formation. The self-cleaning efficiency of the membrane after fouling with a model organic foulant (alginate) was assessed using an electrified cross-flow membrane filtration system. The fouled h-CNT/CM exhibits a near complete water flux recovery following a short (1 min) self-cleaning with an applied voltage of 3 or 4 V and feed solutions of 100 or 10 mM sodium chloride, respectively. Considering the superior performance of the RCS-mediated self-cleaning compared to conventional membrane chemical cleaning using sodium hypochlorite, our results exemplify an effective strategy for in situ electrogeneration of RCS to achieve a highly efficient membrane self-cleaning.

Organic fouling and inorganic scaling are the main hurdles for efficient operation of reverse osmosis (RO) technology in a wide range of applications. This study demonstrates dual-functionality surface modification of thin-film composite (TFC) RO membranes to simultaneously impart anti-scaling and anti-fouling properties. Two different grafting approaches were adapted to functionalize the membrane surface with sulfonic groups: (i) non-specific grafting of vinyl sulfonic acid (VSA) via redox radical initiation polymerization and (ii) covalent bonding of hydroxylamide-O-sulfonic acid (HOSA) to the native carboxylic groups of the polyamide layer via carbodiimide mediated reaction. Both approaches to graft sulfonic groups were effective in increasing surface wettability and negative charge density of the TFC-RO membranes without significant alteration of water and salt permeabilities. Importantly, we verified through surface elemental analysis that covalently bound HOSA effectively covers the native carboxylic groups of the PA layer. Both the VSA and HOSA membranes exhibited lower flux decline during silica scaling and organic (alginate) fouling relative to the control unmodified membrane, demonstrating the unique versatility of sulfonic groups to endow the TFC-RO membranes with dual functionality to resist scaling and fouling. In particular, the HOSA membrane showed excellent physical cleaning efficiencies with water flux recoveries of 92.5 ± 1.0% and 88.4 ± 6.4% for silica scaling and alginate fouling, respectively. Additional results from silica nucleation experiments and atomic force measurements provided insights into the mechanisms of improved resistance to silica scaling and organic fouling imparted by the surface-functionalized sulfonic groups. Our study highlights the promise of controlled functionalization of sulfonic groups on the polyamide layer of TFC membranes to enhance the applications of RO technology in treatment and reuse of waters with high scaling and fouling potential.

Thin-film composite (TFC) polyamide reverse osmosis (RO) membranes are prone to biofouling due to their inherent physicochemical surface properties. In order to address the biofouling problem, we have developed novel surface coatings functionalized with biocidal silver nanoparticles (AgNPs) and antifouling polymer brushes via polyelectrolyte layer-by-layer (LBL) self-assembly. The novel surface coating was prepared with polyelectrolyte LBL films containing poly(acrylic acid) (PAA) and poly(ethylene imine) (PEI), with the latter being either pure PEI or silver nanoparticles coated with PEI (Ag–PEI). The coatings were further functionalized by grafting of polymer brushes, using either hydrophilic poly(sulfobetaine) or low surface energy poly(dimethylsiloxane) (PDMS). The presence of both LBL films and sulfobetaine polymer brushes at the interface significantly increased the hydrophilicity of the membrane surface, while PDMS brushes lowered the membrane surface energy. Overall, all surface modifications resulted in significant reduction of irreversible bacterial cell adhesion. In microbial adhesion tests with E. coli bacteria, a normalized cell adhesion in the range of only 4 to 16% on the modified membrane surfaces was observed. Modified surfaces containing silver nanoparticles also exhibited strong antimicrobial activity. Membranes coated with LBL films of PAA/Ag–PEI achieved over 95% inactivation of bacteria attached to the surface within 1 hour of contact time. Both the antifouling and antimicrobial results suggest the potential of using these novel surface coatings in controlling the fouling of RO membranes.

The robustness of carbon nanomaterials and their potential for ultrahigh permeability has drawn substantial interest for separation processes. However, graphene oxide membranes (GOms) have demonstrated limited viability due to instabilities in their microstructure that lead to failure under cross-flow conditions and applied hydraulic pressure. Here we present a highly stable and ultrapermeable zeolitic imidazolate framework-8 (ZIF-8)-nanocrystal-hybridized GOm that is prepared by ice templating and subsequent in situ crystallization of ZIF-8 at the nanosheet edges. The selective growth of ZIF-8 in the microporous defects enlarges the interlayer spacings while also imparting mechanical integrity to the laminate framework, thus producing a stable microstructure capable of maintaining a water permeability of 60 l m−2 h−1 bar−1 (30-fold higher than GOm) for 180 h. Furthermore, the mitigation of microporous defects via ZIF-8 growth increased the permselectivity of methyl blue molecules sixfold. Low-field nuclear magnetic resonance was employed to characterize the porous structure of our membranes and confirm the tailored growth of ZIF-8. Our technique for tuning the membrane microstructure opens opportunities for developing next-generation nanofiltration membranes. Highly stable and ultrapermeable membranes can be fabricated by the hybridization of zeolitic imidazolate framework-8 and graphene oxide.

Reverse Osmosis (RO) is a membrane-based technology for water desalination. Of paramount importance is the understanding of ion selectivity in mixtures of salts, i.e., to what extent the membrane retains one ion more than another in a multicomponent salt solution. We apply continuum transport theory to describe a large set of data for the ion selectivity of RO membranes treating brackish groundwater with more than 10 different monovalent and divalent ions. The model is based on the Donnan steric partitioning pore model extended to include ions of multiple charge states, such as bicarbonate/carbonic acid, ammonia/ammonium, and hydroxyl/hydronium ions and the acid-base reactions between them and with the membrane charge. By adjusting for each ion the ratio of ion size over pore size, we can fit the model to the data. We note that the fitted ion sizes do not always follow a logical order based on the ionic or hydrated size of the ions and that rejection of divalent cations is overestimated in some cases. We discuss possible theoretical improvements to address these discrepancies. Our results highlight the potential of continuum transport theory to describe in detail multicomponent ion transport in RO membranes. The development of a detailed and validated physics-based model is an important step toward achieving improved operation and design of RO-based desalination systems.

Polyelectrolyte multilayer membranes (PEMs) produced by the sequential, layer-by-layer deposition of polyelectrolytes on porous supports have been shown to significantly reject ions in dilute saline solutions. However, polyelectrolyte thin films are susceptible to swelling or detachment from the substrate in higher salinities and extreme pH conditions, such that their performance is highly dependent on feed water composition. In this study, we introduce tethered electrolyte active-layer membranes (TEAMs), whereby charged block copolymers are covalently grafted-from a porous support, in aim of reducing the stimuli response of layered polyelectrolyte membranes under variable solution conditions. Cellulose support layers were modified using surface-initiated atom transfer radical polymerization of neutral precursor polymers, which were then converted into charged blocks after polymerization. An ultrathin layer of a single negative or positive block with a degree of polymerization (DP) ≥ 770 exhibited ∼15–20 L m-2 h-1 bar-1 pure water permeability, 45–60% rejection of monovalent co-ions, and ∼75% rejection of divalent co-ions. In mixed feed solutions, selectivity of monovalent over divalent co-ions with single-block TEAMs fell within the range of 2–4. Single-block TEAMs slightly shrank under high salt concentration, contrary to the typical substantial swelling of PEMs. As such, this new form of polyelectrolyte membrane may provide greater stability than conventional PEMs and may have potential applications in water softening and salinity reduction of surface waters.

Enhancing the chemical and physical properties of the polyamide active layer of thin-film composite (TFC) membranes by surface coating is a goal long-pursued. Atomic layer deposition (ALD) has been proposed as an innovative approach to deposit chemically robust metal oxides onto membrane surfaces due to its unique capability to control coating conformality and thickness with atomic scale precision. This study examined the potential to coat the surface of TFC reverse osmosis (RO) and nanofiltration (NF) membranes via ALD of TiO2. Our results suggest that the optimal ALD conditions, the film growth kinetics, and the depth of deposition are different for RO and NF membranes due to the different diffusive transport of ALD precursors through the membrane pores. The TiO2 coating mainly located at the surface of the RO membrane; in contrast, the TiO2 coating extended to the depth of the NF membrane. The TiO2 coating degraded membrane water permeability and salt rejection beyond 10 cycles of ALD, the condition commonly employed in previous ALD-based membrane modification studies. Instead, this study showed that with fewer than 10 cycles, the TiO2 coating of RO membrane increased the membrane surface charge without negatively impacting water permeability and salt rejection. For the NF membranes, the coating of TiO2 inside their pores led to the tuning of pore sizes and increased the rejection of selected solutes.

Membrane modification using zwitterion polymers is an excellent strategy to reduce organic fouling and initial bacterial deposition, and functionalization of the membrane surface with antibacterial material can reduce biofilm formation. In this study, we combined these two approaches to develop an ultrafiltration polyethersulfone (PES) membrane with dual antifouling and antibacterial properties. At the beginning, a zwitterion polyampholyte hydrogel was UV grafted onto PES membrane surface (p-PES membrane). Then, the hydrogel was loaded with graphene oxide (GO) nanosheets using vacuum filtration strategy (GO-p-PES membrane). Raman spectroscopy and scanning electron microscopy (SEM) confirmed the successful incorporation of the GO nanosheets into the zwitterion hydrogel, and contact angle measurements indicated that the membrane hydrophilicity was enhanced. Static adsorption and dynamic filtration experiments demonstrated that the p-PES and GO-p-PES membranes exhibited similar organic fouling propensity. Moreover, the loading of GO induced antibacterial property for the membrane as evidenced by contact killing and antibiofouling filtration experiments. Leaching of GO was very low, with over 98% of the GO remaining on the membrane surface after 7 days. Our findings highlight the potential of this GO-functionalized polyampholyte hydrogel for long-term wastewater treatment.

Reverse osmosis (RO) has become a premier technology for desalination and water purification. The need for increased selectivity has incentivized research into novel membranes, such as biomimetic membranes that incorporate the perfectly selective biological water channel aquaporin or synthetic water channels like carbon nanotubes. In this study, we consider the performance of composite biomimetic membranes by projecting water permeability, salt rejection, and neutral-solute retention based on the permeabilities of the individual components, particularly the water channel, the amphiphilic bilayer matrix, and potential support layers that include polymeric RO, nanofiltration (NF), and porous ultrafiltration membranes. We find that the support layer will be crucial in the overall performance. Selective, relatively low-permeability supports minimize the negative impact of defects in the biomimetic layer, which are currently the main performance-limiting factor for biomimetic membranes. In particular, RO membranes as support layers would enable99.85% salt rejection at ∼10000-fold greater biomimetic-layer defect area than for porous supports. By fundamentally characterizing neutral-solute permeation through RO and NF membranes, we show that RO membranes as support layers would enable high rejection of organic pollutants based on molecular size, overcoming the rapid permeation of hydrophobic solutes through the biomimetic layer. A biomimetic membrane could also achieve exceptionally high boron rejections of ∼99.7%, even with 1% defect area in the biomimetic layer. We conclude by discussing the implications of our findings for biomimetic membrane design.

Biofouling is a major obstacle for the efficient and reliable operation of membrane-based desalination processes. Innovations in membrane materials and fabrication processes are therefore needed to develop antibiofouling strategies. In this study, we utilize the alignability of an emerging two-dimensional nanomaterial, graphene oxide (GO), to fabricate a desalination membrane with enhanced bacterial resistance. GO nanosheets are dispersed in a polymer solution to form a homogeneous mixture, which undergoes slow solvent evaporation in a magnetic field to create a thin nanocomposite membrane with vertically aligned GO nanosheets. The structural characteristics of the fabricated membranes confirm the enhanced exposure of nanosheet edges on the surface through the vertical alignment of GO. Notably, the addition and alignment of GO do not compromise membrane water permeability and water–salt selectivity. When contacted with bacterial cells, membranes with vertically aligned GO nanosheets exhibit enhanced antim...

We fabricated polyelectrolyte multilayer (PEM) nanofiltration (NF) membranes using a layer-by-layer (LbL) method for effective removal of scale-forming divalent cations (Mg2+, Ca2+, Sr2+, and Ba2+) from feedwaters with different salinities. Two polymers with opposite charges, polycation (poly(diallyldimethylammonium chloride), PDADMAC) and polyanion (poly(sodium 4-styrenesulfonate), PSS), were sequentially deposited on a commercial polyamide NF membrane to form a PEM. Compared to pristine and PSS-terminated membranes, PDADMAC-terminated membranes demonstrated much higher rejection of divalent cations and selectivity for sodium transport over divalent cations (Na+/X2+) due to a combination of both Donnan- and size-exclusion effects. A PDADMAC-terminated membrane with 5.5 bilayers exhibited 97% rejection of Mg2+ with selectivity (Na+/Mg2+) greater than 30. We attribute the order of cation rejection (Mg2+ > Ca2+ > Sr2+ > Ba2+) to the ionic size, which governs both the hydration radius and hydration energy of the cations. The ionic strength (salinity) of the feed solution had a significant influence on both water flux and cation rejection of PEM membranes. In feed solutions with high ionic strength, abundant NaCl salt screened the charge of the polyelectrolytes and led to swelling of the multilayers, resulting in decreased selectivity (Na+/X2+) and increased water permeability. The fabricated PEM membranes can be potentially applied to the pretreatment of mild-salinity brackish waters to reduce membrane scaling in the main desalination stage.

We investigated the relationship between silica scaling and protein fouling in reverse osmosis (RO). Flux decline caused by combined scaling and fouling was compared with those by individual scaling or fouling. Bovine serum albumin (BSA) and lysozyme (LYZ), two proteins with opposite charges at typical feedwater pH, were used as model protein foulants. Our results demonstrate that water flux decline was synergistically enhanced when silica and protein were both present in the feedwater. For example, flux decline after 500 min was far greater in combined silica scaling and BSA fouling experiments (55 ± 6% decline) than those caused by silica (11 ± 2% decline) or BSA (9 ± 1% decline) alone. Similar behavior was observed with silica and LYZ, suggesting that this synergistic effect was independent of protein charge. Membrane characterization by scanning electron microscopy and Fourier transform infrared spectroscopy revealed distinct foulant layers formed by BSA and LYZ in the presence of silica. A combination of dynamic light scattering, transmission electron microscopy , and energy dispersive X-ray spectroscopy analyses further suggested that BSA and LYZ facilitated the formation of aggregates with varied chemical compositions. As a result, BSA and LYZ were likely to play different roles in enhancing flux decline in combined scaling and fouling. Our study suggests that the coexistence of organic foulants, such as proteins, largely alters scaling behavior of silica, and that accurate prediction of RO performance requires careful consideration of foulant-scalant interactions.

Self-cleaning, antifouling ultrafiltration membranes are critically needed to mitigate organic fouling in water and wastewater treatment. In this study, we fabricated a novel polyvinylidene fluoride (PVDF) composite ultrafiltration membrane coated with FeOCl nanocatalysts (FeOCl/PVDF) via a facile, scalable thermal-treatment method, for the synergetic separation and degradation of organic pollutants. The structure, composition, and morphology of the FeOCl/PVDF membrane were extensively characterized. Results showed that the as-prepared FeOCl/PVDF membrane was uniformly covered with FeOCl nanoparticles with an average diameter of 1–5 nm, which greatly enhanced membrane hydrophilicity. The catalytic self-cleaning and antifouling properties of the FeOCl/PVDF membrane were evaluated in the presence of H2O2 at neutral pH. Using a facile H2O2 cleaning process, we showed that the FeOCl/PVDF membrane can achieve an excellent water flux recovery rate of ∼100%, following organic fouling with a model organic foulant...

Biological wastewater treatment is not effective in removal of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs). In this study, we fabricated a photocatalytic reactive membrane by functionalizing polyvinylidene fluoride (PVDF) ultrafiltration (UF) membrane with titanium oxide (TiO2) nanoparticles for the removal of ARB and ARGs from a secondary wastewater effluent. The TiO2-modified PVDF membrane provided complete retention of ARB and effective photocatalytic degradation of ARGs and integrons. Specifically, the total removal efficiency of ARGs (i.e., plasmid-mediated floR, sul1, and sul2) with TiO2-modified PVDF membrane reached ∼98% after exposure to UV irradiation. Photocatalytic degradation of ARGs located in the genome was found to be more efficient than those located in plasmid. Excellent removal of integrons (i.e., intI1, intI2, and intI3) after UV treatment indicated that the horizontal transfer potential of ARGs was effectively controlled by the TiO2 photocatalytic reacti...

In this study, we demonstrate nanostructured osmosis membranes that employ vapor-phase water transport to simultaneously achieve high rejection of solutes and a high permeability. The membranes consist of a hydrophobic, thermally conductive silica nanoparticle (SiNP) layer with tunable thickness supported by a hydrophilic track-etched membrane. The membrane permeability for water vapor is 1–2 orders of magnitude higher than hydrophobic microporous membranes used for osmotic distillation. This permeability is only mildly lower (~ 3 times) than the equivalent water permeability of typical forward osmosis (FO) membranes. We also demonstrate the high selectivity of the SiNP membrane via urea permeation tests, where this membrane exhibits a 2–3 orders of magnitude lower urea permeability coefficient than a thin-film composite (TFC) FO membrane. Further measurements and theoretical analysis using the dusty-gas model suggest that membranes with a smaller SiNP layer thickness are capable of having comparable water fluxes to TFC FO membranes while maintaining higher selectivity. Our work demonstrates that thin, hydrophobic nanostructured membranes composed of thermally conductive materials have a great potential to significantly extend the applications of osmosis-driven processes to treat challenging water sources.

We demonstrate the fabrication of a loose, negatively charged nanofiltration (NF) membrane with tailored selectivity for the removal of perfluoroalkyl substances with reduced scaling potential. A selective polyamide layer was fabricated on top of a poly(ether sulfone) support via interfacial polymerization of trimesoyl chloride and a mixture of piperazine and bipiperidine. Incorporating high molecular weight bipiperidine during the interfacial polymerization enables the formation of a loose, nanoporous selective layer structure. The fabricated NF membrane possessed a negative surface charge and had a pore diameter of ∼1.2 nm, much larger than a widely used commercial NF membrane (i.e., NF270 with pore diameter of ∼0.8 nm). We evaluated the performance of the fabricated NF membrane for the rejection of different salts (i.e., NaCl, CaCl2, and Na2SO4) and perfluorooctanoic acid (PFOA). The fabricated NF membrane exhibited a high retention of PFOA (∼90%) while allowing high passage of scale-forming cations (i...

Conventional asymmetric or thin-film composite forward osmosis (FO) membranes suffer from severe internal concentration polarization, which significantly hinders process performance and practical applications. Here we report the synthesis of the COOH-derived polyoxadiazole copolymer for the fabrication of a self-standing selective thin film without a support layer. The thickness of the membrane was controlled at merely a few micrometers to achieve a high rate of rejection of the Na2SO4 draw solution, while maintaining acceptable water permeability. Because of the symmetric architecture, the membrane exhibited excellent and identical FO performance at both of its sides. The structural parameter of the fabricated membranes was zero because of the absence of internal concentration polarization in the symmetric FO membranes. Our results highlight the potential of support-free membranes for the further development of FO technology.