Search

The electron cryo-microscopy (cryo-EM) approach of 2D electron crystallography allows for structure determination of two-dimensional (2D) crystals of soluble and membrane proteins, employing identical principles and methods once 2D crystals are obtained. Two-dimensional crystallization trials of membrane proteins can result in multiple outcomes of ordered arrays, which may be suited for either 2D electron crystallography, helical analysis, or MicroED.The membrane protein 2D crystals used for 2D electron crystallography are either single- or double-layered ordered proteoliposome vesicles or sheet-like membranes. We have developed a cryo-EM grid preparation approach, which allows for the analysis of stacked 2D crystals that are neither suitable for MicroED nor for directly applying 2D electron crystallography. This new grid preparation approach, the peel-blot, uses the capillary force generated by submicron filter paper and mechanical means for the separation of stacked 2D crystals into single-layered 2D crystals, for which standard 2D electron crystallography can then be employed. The preparation of 2D crystals, the peel-blot grid preparation, and the structure determination by 2D electron crystallography are described here.

Reconstitution of detergent-solubilized membrane proteins into phospholipid bilayers allows for functional and structural studies under close-to-native conditions that greatly support protein stability and function. Here we outline the detailed steps for membrane protein reconstitution to result in proteoliposomes and nanodiscs. Reconstitution can be achieved via a number of different strategies. The protocols for preparation of proteoliposomes use detergent removal via dialysis or via nonpolar polystyrene beads, or a mixture of the two methods. In this chapter, the protocols for nanodiscs apply polystyrene beads only. Proteoliposome preparation methods allow for substantial control of the lipid-to-protein ratio, from minimal amounts of phospholipid to high concentrations, type of phospholipid, and mixtures of phospholipids. In addition, dialysis affords a fairly large degree of control and variation of parameters such as rate of reconstitution, temperature, buffer conditions, and proteoliposome size. For the nanodisc approach, which is highly advantageous for ensuring equal access to both membrane sides of the protein as well as fast reconstitution of only a single membrane protein into a well-defined bilayer environment in each nanodisc, the protocols outline how a number of these parameters are more restricted in comparison to the proteoliposome protocols.

Electron crystallography is an electron cryo-microscopy (cryo-EM) method that is particularly suitable for structure-function studies of small membrane proteins, which are crystallized in two-dimensional (2D) arrays for subsequent cryo-EM data collection and image processing. This approach allows for structural analysis of membrane proteins in a close-to-native, phospholipid bilayer environment. The process of growing 2D crystals from purified membrane proteins by dialysis detergent removal is described in this chapter. A short section covers screening for and identifying 2D crystals by transmission electron microscopy, and in the last section, optimization of the purification to obtain crystals of higher quality is discussed., (© 2015 Elsevier Inc. All rights reserved.)

Two-dimensional (2D) crystals of integral membrane proteins, comprising ordered protein reconstituted into a synthetic lipid bilayer, can be induced to form from detergent solubilized and purified membrane protein sources via the addition of exogenous lipid and the subsequent removal of the solubilizing detergent. This is most commonly accomplished by dialysis of a small volume of ternary protein-detergent-lipid mixture against a large volume of buffer, and can be carried out using common, easily available materials. Following successful crystallization, electron crystallographic data obtained by electron cryo-microscopy (cryo-EM) of vitrified 2D crystals can be used to determine the structure of the lipid bilayer-embedded integral membrane protein., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Electron crystallography is emerging as an important method in solving protein structures. While it has found extensive applications in the understanding of membrane protein structure and function at a wide range of resolutions, from revealing oligomeric arrangements to atomic models, electron crystallography has also provided invaluable information on the soluble α/β-tubulin which could not be obtained by any other method to date. Examples of critical insights from selected structures of membrane proteins as well as α/β-tubulin are described here, demonstrating the vast potential of electron crystallography that is first beginning to unfold.

Studies of membrane proteins by two-dimensional (2D) crystallization and electron crystallography have provided crucial information on the structure and function of a rapidly growing number of these intricate proteins within a close-to-native lipid bilayer. Here we provide protocols for planning and executing 2D crystallization trials by detergent removal through dialysis, including the preparation of phospholipids and the dialysis setup. General factors to be considered, such as the protein preparation, solubilizing detergent, lipid for reconstitution, and buffer conditions are discussed. Several 2D crystallization conditions are highlighted that have shown great promise to grow 2D crystals within a surprisingly short amount of time. Finally, conditions for optimizing order and size of 2D crystals are outlined.

Membrane protein structure and function can be studied by two powerful and highly complementary electron cryomicroscopy (cryo-EM) methods: electron crystallography of two-dimensional (2D) crystals and single particle analysis of detergent-solubilized protein complexes. To obtain the highest-possible resolution data from membrane proteins, whether prepared as 2D crystals or single particles, cryo-EM samples must be vitrified with great care. Grid preparation for cryo-EM of 2D crystals is possible by back-injection, the carbon sandwich technique, drying in sugars before cooling in the electron microscope, or plunge-freezing. Specimen grids for single particle cryo-EM studies of membrane proteins are usually produced by plunge-freezing protein solutions, supported either by perforated or a continuous carbon film substrate. This review outlines the different techniques available and the suitability of each method for particular samples and studies. Experimental considerations in sample preparation and preservation include the protein itself and the presence of lipid or detergent. The appearance of cryo-EM samples in different conditions is also discussed., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Electron crystallography has evolved as a method that can be used either alternatively or in combination with three-dimensional crystallization and X-ray crystallography to study structure-function questions of membrane proteins, as well as soluble proteins. Screening for two-dimensional (2D) crystals by transmission electron microscopy (EM) is the critical step in finding, optimizing, and selecting samples for high-resolution data collection by cryo-EM. Here we describe the fundamental steps in identifying both large and ordered, as well as small 2D arrays, that can potentially supply critical information for optimization of crystallization conditions. By working with different magnifications at the EM, data on a range of critical parameters is obtained. Lower magnification supplies valuable data on the morphology and membrane size. At higher magnifications, possible order and 2D crystal dimensions are determined. In this context, it is described how CCD cameras and online-Fourier Transforms are used at higher magnifications to assess proteoliposomes for order and size. While 2D crystals of membrane proteins are most commonly grown by reconstitution by dialysis, the screening technique is equally applicable for crystals produced with the help of monolayers, native 2D crystals, and ordered arrays of soluble proteins. In addition, the methods described here are applicable to the screening for 2D crystals of even smaller as well as larger membrane proteins, where smaller proteins require the same amount of care in identification as our examples and the lattice of larger proteins might be more easily identifiable at earlier stages of the screening.

Structural and functional information of membrane proteins at ever-increasing resolution is being obtained by electron crystallography. While a large amount of work on the development of methods for electron microscopy and image processing has resulted in tremendous advances in terms of speed of data collection and resolution, general guidelines for crystallization are first starting to emerge. Yet two-dimensional crystallization itself will always remain the limiting factor of this powerful approach in structural biology. Two-dimensional crystallization through detergent removal by dialysis is the most widely used technique. Four main factors need to be considered for the dialysis method: the protein preparation, the detergent, the lipid added as well as any constituent lipid, and the buffer conditions. Equally important is proper and careful screening to identify two-dimensional crystals.

The formation of two-dimensional crystals of the membrane-bound enzyme microsomal glutathione transferase is sensitive to fractional changes in the lipid-to-protein ratio. Variation of this parameter results in crystal polymorphism. The projection structure of a p6 crystal form of the enzyme has been determined by the use of electron crystallography. The unit cell at 3 A resolution is comprised of two trimers. The hexagonal p6 and the orthorhombic p21212 crystal types have common elements in the packing arrangement which imply dominant crystal contacts. An overall structural similarity between the protein molecules in the two crystal forms is suggested by the projection maps. Furthermore, a comparison of the p6 and p21212 projection maps identifies additional corresponding protein densities which could not be assigned to the microsomal glutathione transferase trimer previously. Surprisingly, an ambiguity of the rotational orientation was found for trimers interspersed at certain positions within the crystal lattice., (Copyright 1999 Academic Press.)

Various crystallization parameters were investigated to obtain two-dimensional crystals of the detoxification enzyme microsomal glutathione transferase for structural analysis by electron crystallography. The protein was crystallized by reconstitution of the solubilized trimer into proteoliposomes. Crystallization occurs when minimal amounts of lipid in the range of three lipid molecules per protein trimer are added to the dialysate. Once crystals were obtained, the effect of several parameters on the crystallization was determined. The temperature and initial detergent concentration were found to be crucial parameters in influencing the size of the crystals, and conclusions could be drawn about the rate dependence of the crystallization process. Two highly ordered crystal forms, which are suitable for structural analysis by electron crystallography, were obtained under the two-dimensional crystallization conditions described here., (Copyright 1998 Academic Press.)

Extended abstract of a paper presented at Microscopy and Microanalysis 2010 in Portland, Oregon, USA, August 1 – August 5, 2010. [ABSTRACT FROM PUBLISHER]

Abstract: Human leukotriene C4 synthase (LTC4S) forms highly ordered two-dimensional (2D) crystals under specific reconstitution conditions. It was found that control of a larger number of parameters than is usually observed for 2D crystallization of membrane proteins was necessary to induce crystal formation of LTC4S. Here, we describe the parameters that were optimized to yield large and well-ordered 2D crystals of LTC4S. Careful fractioning of eluates during the protein purification was essential for obtaining crystals. While the lipid-to-protein ratio was critical in obtaining order, four parameters were decisive in inducing growth of crystals that were up to several microns in size. To obtain a favorable diameter, salt, temperature, glycerol, and initial detergent concentration had to be controlled with great care. Interestingly, several crystal forms could be grown, namely the plane group symmetries of p2, p3, p312, and two different unit cell sizes of plane group symmetry p321. [Copyright &y& Elsevier]