Search

The advances of neural recording techniques have fostered rapid growth of the number of simultaneously recorded neurons, opening up new possibilities to investigate the interactions and dynamics inside neural circuitry. The high recording channel counts, however, pose significant challenges for data analysis because the required time and computational resources grow superlinearly with the data volume. Herein, the feasibility of real‐time reconstruction of neural functional connectivity using a second‐order memristor network is analyzed. Spike‐timing‐dependent plasticity, natively implemented by the internal dynamics of the memristor device, leads to the successful discovery of temporal correlations between pre‐ and postsynaptic spikes of the simulated neural circuits in an unsupervised fashion. The proposed system demonstrates high classification accuracy under a wide range of parameter settings considering indirect connections, synaptic weights, transmission delays, connection density, and so on, and enables the capturing of dynamic connectivity evolutions. The influence of device nonideal factors on detection accuracy is systematically evaluated, and the system shows robustness to initial weight randomness, and cycle‐to‐cycle and device‐to‐device variations. The proposed method allows direct mapping of neural connectivity onto the artificial memristor network and can lead to efficient front‐end data analysis of high‐density neural recording systems and potentially directly coupled bioartificial networks. [ABSTRACT FROM AUTHOR]

Stochastic Computing (SC) is a computing paradigm that allows for the low-cost and low-power computation of various arithmetic operations using stochastic bit streams and digital logic. In contrast to conventional representation schemes used within the binary domain, the sequence of bit streams in the stochastic domain is inconsequential, and computation is usually non-deterministic. In this brief, we exploit the stochasticity during switching of probabilistic Conductive Bridging RAM (CBRAM) devices to efficiently generate stochastic bit streams in order to perform Deep Learning (DL) parameter optimization, reducing the size of Multiply and Accumulate (MAC) units by 5 orders of magnitude. We demonstrate that in using a 40-nm Complementary Metal Oxide Semiconductor (CMOS) process our scalable architecture occupies 1.55mm2 and consumes approximately 167 μW when optimizing parameters of a Convolutional Neural Network (CNN) while it is being trained for a character recognition task, observing no notable reduction in accuracy post-training. [ABSTRACT FROM AUTHOR]

Memristors have emerged as transformative devices to enable neuromorphic and in‐memory computing, where success requires the identification and development of materials that can overcome challenges in retention and device variability. Here, high‐entropy oxide composed of Zr, Hf, Nb, Ta, Mo, and W oxides is first demonstrated as a switching material for valence change memory. This multielement oxide material provides uniform distribution and higher concentration of oxygen vacancies, limiting the stochastic behavior in resistive switching. (Zr, Hf, Nb, Ta, Mo, W) high‐entropy‐oxide‐based memristors manifest the "cocktail effect," exhibiting comparable retention with HfO2‐ or Ta2O5‐based memristors while also demonstrating the gradual conductance modulation observed in WO3‐based memristors. The electrical characterization of these high‐entropy‐oxide‐based memristors demonstrates forming‐free operation, low device and cycle variability, gradual conductance modulation, 6‐bit operation, and long retention which are promising for neuromorphic applications. [ABSTRACT FROM AUTHOR]

Neuromorphic systems using memristors as artificial synapses have attracted broad interest for energy-efficient computing applications. However, networks based on these purely passive devices can be affected by parasitic effects such as series resistance and sneak path problems. Here, we analyze the effects of parasitic factors on the performance of memristor-based neuromorphic systems. During vector-array multiplication, the line resistance can cause significant distortion of the output current and the activity of the corresponding neurons. An approach to compensate the line resistance effects based on an approximate model consisting of only few known parameters is proposed and shows excellent ability to capture the complex network behavior. During training and feature detection, the series resistance can cause significant degradation of the learned dictionary, with only a few dominant neurons being trained. Using a scaling factor based on the proposed simple model, these effects can be successfully mitigated, and the correct network operations can be restored. These results provide insight and practical measures on the parasitic effects for implementation of the neuromorphic system using memristor arrays. [ABSTRACT FROM PUBLISHER]

Reservoir computing systems utilize dynamic reservoirs having short-term memory to project features from the temporal inputs into a high-dimensional feature space. A readout function layer can then effectively analyze the projected features for tasks, such as classification and time-series analysis. The system can efficiently compute complex and temporal data with low-training cost, since only the readout function needs to be trained. Here we experimentally implement a reservoir computing system using a dynamic memristor array. We show that the internal ionic dynamic processes of memristors allow the memristor-based reservoir to directly process information in the temporal domain, and demonstrate that even a small hardware system with only 88 memristors can already be used for tasks, such as handwritten digit recognition. The system is also used to experimentally solve a second-order nonlinear task, and can successfully predict the expected output without knowing the form of the original dynamic transfer function. [ABSTRACT FROM AUTHOR]

Memristors and memristive systems have been extensively studied for data storage and computing applications such as neuromorphic systems. To act as synapses in neuromorphic systems, the memristor needs to exhibit analog resistive switching (RS) behavior with incremental conductance change. In this study, we show that the dynamic range of the analog RS behavior can be significantly enhanced in a tantalum-oxide-based memristor. By controlling different state variables enabled by different physical effects during the RS process, the gradual filament expansion stage can be selectively enhanced without strongly affecting the abrupt filament length growth stage. Detailed physics-based modeling further verified the observed experimental effects and revealed the roles of oxygen vacancy drift and diffusion processes, and how the diffusion process can be selectively enhanced during the filament expansion stage. These findings lead to more desirable and reliable memristor behaviors for analog computing applications. Additionally, the ability to selectively control different internal physical processes demonstrated in the current study provides guidance for continued device optimization of memristor devices in general. [ABSTRACT FROM AUTHOR]

Memristors have attracted broad interest as a promising candidate for future memory and computing applications. Particularly, it is believed that memristors can effectively implement synaptic functions and enable efficient neuromorphic systems. Most previous studies, however, focus on implementing specific synaptic learning rules by carefully engineering external programming parameters instead of focusing on emulating the internal cause that leads to the apparent learning rules. Here, it is shown that by taking advantage of the different time scales of internal oxygen vacancy ( VO) dynamics in an oxide-based memristor, diverse synaptic functions at different time scales can be implemented naturally. Mathematically, the device can be effectively modeled as a second-order memristor with a simple set of equations including multiple state variables. Not only is this approach more biorealistic and easier to implement, by focusing on the fundamental driving mechanisms it allows the development of complete theoretical and experimental frameworks for biologically inspired computing systems. [ABSTRACT FROM AUTHOR]

Memristors have emerged as a promising candidate for critical applications such as non-volatile memory as well as non-Von Neumann computing architectures based on neuromorphic and machine learning systems. In this study, we demonstrate that memristors can be used to perform principal component analysis (PCA), an important technique for machine learning and data feature learning. The conductance changes of memristors in response to voltage pulses are studied and modeled with an internal state variable to trace the analog behavior of the device. Unsupervised, online learning is achieved in a memristor crossbar using Sanger's learning rule, a derivative of Hebb's rule, to obtain the principal components. The details of weights evolution during training is investigated over learning epochs as a function of training parameters. The effects of device non-uniformity on the PCA network performance are further analyzed. We show that the memristor-based PCA network is capable of linearly separating distinct classes from sensory data with high clarification success of 97.6% even in the presence of large device variations. [ABSTRACT FROM AUTHOR]

Memristors have been considered as a leading candidate for a number of critical applications ranging from nonvolatile memory to non-Von Neumann computing systems. Feature extraction, which aims to transform input data from a high-dimensional space to a space with fewer dimensions, is an important technique widely used in machine learning and pattern recognition applications. Here, we experimentally demonstrate that memristor arrays can be used to perform principal component analysis, one of the most commonly used feature extraction techniques, through online, unsupervised learning. Using Sanger's rule, that is, the generalized Hebbian algorithm, the principal components were obtained as the memristor conductances in the network after training. The network was then used to analyze sensory data from a standard breast cancer screening database with high classification success rate (97.1%). [ABSTRACT FROM AUTHOR]

Memristors have been extensively studied for data storage and low-power computation applications. In this study, we show that memristors offer more than simple resistance change. Specifically, the dynamic evolutions of internal state variables allow an oxide-based memristor to exhibit Ca2+-like dynamics that natively encode timing information and regulate synaptic weights. Such a device can be modeled as a second-order memristor and allow the implementation of critical synaptic functions realistically using simple spike forms based solely on spike activity. [ABSTRACT FROM AUTHOR]