Search

Two-dimensional flat-band systems have recently attracted considerable interest due to the rich physics unveiled by emergent phenomena and correlated electronic states at van Hove singularities. However, the difficulties in electrically detecting the flat band position in field-effect structures are slowing down the investigation of their properties. In this work, we employ Indium Selenide (InSe) as a flat-band system due to a van Hove singularity at the valence band edge in a few-layer form of the material without the requirement of a twist angle. We investigate tunneling photocurrents in gated few-layer InSe structures and relate them to ambipolar transport and photoluminescence measurements. We observe an appearance of a sharp change in tunneling mechanisms due to the presence of the van Hove singularity at the flat band. We further corroborate our findings by studying tunneling currents as a reliable probe for the flat-band position up to room temperature. Our results create an alternative approach to studying flat-band systems in heterostructures of 2D materials.

Led by the rise of the internet of things, the world is experiencing exponential growth of generated data. Data-driven algorithms such as signal processing and artificial neural networks are required to process and extract meaningful information from it. They are, however, seriously limited by the traditional von-Neuman architecture with physical separation between processing and memory, motivating the development of in-memory computing. This emerging architecture is gaining attention by promising more energy-efficient computing on edge devices. In the past few years, two-dimensional materials have entered the field as a material platform suitable for realizing efficient memory elements for in-memory architectures. Here, we report a large-scale integrated 32x32 vector-matrix multiplier with 1024 floating-gate field-effect transistors (FGFET) that use monolayer MoS2 as the channel material. In our wafer-scale fabrication process, we achieve a high yield and low device-to-device variability, which are prerequisites for practical applications. A statistical analysis shows the potential for multilevel and analog storage with a single programming pulse, allowing our accelerator to be programmed using an efficient open-loop programming scheme. Next, we demonstrate reliable, discrete signal processing in a highly parallel manner. Our findings set the grounds for creating the next generation of in-memory processors and neural network accelerators that can take advantage of the full benefits of semiconducting van der Waals materials for non-von Neuman computing.

While most neuromorphic systems are based on nanoscale electronic devices, nature relies on ions for energy-efficient information processing. Therefore, finding memristive nanofluidic devices is a milestone toward realizing electrolytic computers mimicking the brain down to its basic principles of operations. Here, we present a nanofluidic device designed for circuit scale in-memory processing that combines single-digit nanometric confinement and large entrance asymmetry. Our fabrication process is scalable while the device operates at the second timescale with a twenty-fold conductance ratio. It displays a switching threshold due to the dynamics of an extended space charge. The combination of these features permits assembling logic circuits composed of two interactive nanofluidic devices and an ohmic resistor. These results open the way to design multi-component ionic machinery, such as nanofluidic neural networks, and implementing brain-inspired ionic computations.

Transition-metal dichalcogenide bilayers exhibit a rich exciton landscape including layer-hybridized excitons, i.e. excitons which are of partly intra- and interlayer nature. In this work, we study hybrid exciton-exciton interactions in naturally stacked WSe$_2$ homobilayers. In these materials, the exciton landscape is electrically tunable such that the low-energy states can be rendered more or less interlayer-like depending on the strength of the external electric field. Based on a microscopic and material-specific many-particle theory, we reveal two intriguing interaction regimes: a low-dipole regime at small electric fields and a high-dipole regime at larger fields, involving interactions between hybrid excitons with a substantially different intra- and interlayer composition in the two regimes. While the low-dipole regime is characterized by weak inter-excitonic interactions between intralayer-like excitons, the high-dipole regime involves mostly interlayer-like excitons which display a strong dipole-dipole repulsion and give rise to large spectral blue-shifts and a highly anomalous diffusion. Overall, our microscopic study sheds light on the remarkable electrical tunability of hybrid exciton-exciton interactions in atomically thin semiconductors and can guide future experimental studies in this growing field of research., 8+8 pages, 4+2 figures

Intensive research is carried out on two-dimensional materials, in particular molybdenum disulfide, towards high-performance transistors for integrated circuits. Fabricating transistors with ohmic contacts is challenging due to the high Schottky barrier that severely limits the transistors' performance. Graphene-based heterostructures can be used in addition or as a substitute for unsuitable metals. We present lateral heterostructure transistors made of scalable chemical vapor-deposited molybdenum disulfide and chemical vapor-deposited graphene with low contact resistances of about 9 k{\Omega}{\mu}m and high on/off current ratios of 10${^8}. We also present a theoretical model calibrated on our experiments showing further potential for scaling transistors and contact areas into the few nanometers range and the possibility of a strong performance enhancement by means of layer optimizations that would make transistors promising for use in future logic circuits., Comment: 23 pages

Large-area nanopore drilling is a major bottleneck in state-of-the-art nanoporous 2D membrane fabrication protocols. In addition, high-quality structural and statistical descriptions of as-fabricated porous membranes are key to predicting the corresponding membrane-wide permeation properties. In this work, we investigate Xe-ion focused ion beam as a tool for scalable, large-area nanopore fabrication on atomically thin, free-standing molybdenum disulphide. The presented irradiation protocol enables designing ultrathin membranes with tunable porosity and pore dimension, along with spatial uniformity across large-area substrates. Fabricated nanoporous membranes were characterized using scanning transmission electron microscopy imaging and the observed nanopore geometries were analyzed through a pore-edge detection script. We further demonstrated that the obtained structural and statistical data can be readily passed on to computational and analytical tools to predict the permeation properties at both individual pore and membrane-wide scales. As an example, membranes featuring angstrom-scale pores were investigated in terms of their emerging water and ion flow properties through extensive all-atom molecular dynamics simulations. We believe that the combination of experimental and analytical approaches presented here should yield accurate physics-based property estimates and thus potentially enable a true function-by-design approach to fabrication for applications such as osmotic power generation, desalination/filtration, as well as their strain-tunable versions.

International audience; Transition metal dichalcogenides (TMDs) represent an entire new class of semiconducting 2D materials with exciting properties. Defects in 2D TMDs can crucially affect their physical and chemical properties. However, characterization of the presence and spatial distribution of defects is limited either in throughput or in resolution. Here, we demonstrate large area mapping of reactive sulfur-deficient defects in 2D-TMDs coupling single-molecule localization microscopy with fluorescence labeling using thiol chemistry. Our method, reminiscent of PAINT strategies, relies on the specific binding by reversible physisorption of fluorescent probes to sulfur-vacancies via a thiol group and their intermittent emission to apply localization of the labeled defects with a precisiondown to 15 nm. Tuning the distance between the fluorophore and the docking thiol site allows us to control Föster Resonance Energy Transfer (FRET) process and reveal large structural defects such as grain boundaries and line defects, due to the local irregular lattice structure. Our methodology provides a simple and fast alternative for large-scale mapping of non-radiative defects in 2D materials and paves the way for in-situ and spatially resolved monitoring of the interaction between chemical agent and the defects in 2D materials that has general implications for defect engineering in aqueous condition.

Long-lived interlayer excitons with distinct spin-valley physics in van der Waals heterostructures based on transition metal dichalcogenides make them promising for information processing in next-generation devices. While the emission characteristics of interlayer excitons in different types of hetero stacks have been extensively studied, the manipulation of these excitons required to alter the valley-state or tune the emission energy and intensity is still lacking. Here, we demonstrate such control over interlayer excitons in MoSe2/WSe2 heterostructures. The encapsulation of our stack with h-BN ensures ultraclean interfaces, allowing us to resolve four separate narrow interlayer emission peaks. We observe two main interlayer transitions with opposite helicities under circularly polarized excitation, either conserving or inverting the polarization of incoming light. We further demonstrate control over the wavelength, intensity, and polarization of exciton emission by electrical and magnetic fields. Such ability to manipulate the interlayer excitons and their polarization could pave the way for novel excitonic and valleytronic device applications.

To translate electrical into optical signals one uses the modulation of either the refractive index or the absorbance of a material by an electric field. Contemporary electroabsorption modulators (EAMs) employ the quantum confined Stark effect (QCSE), the field-induced red-shift and broadening of the strong excitonic absorption resonances characteristic of low-dimensional semiconductor structures. Here we show an unprecedentedly strong transverse electroabsorption (EA) signal in a monolayer of the two-dimensional semiconductor MoS2. The EA spectrum is dominated by an apparent linewidth broadening of around 15% at a modulated voltage of only Vpp = 0.5 V. Contrary to the conventional QCSE, the signal increases linearly with the applied field strength and arises from a linear variation of the distance between the strongly overlapping exciton and trion resonances. The achievable modulation depths exceeding 0.1 dBnm-1 bear the scope for extremely compact, ultrafast, energy-efficient EAMs for integrated photonics, including on-chip optical communication.

Avalanche photodiodes (APDs) are the semiconducting analogue of photomultiplier tubes offering very high internal current gain and fast response. APDs are interesting for a wide range of applications in communications1, laser ranging2, biological imaging3, and medical imaging4 where they offer speed and sensitivity superior to those of classical p-n junction-based photodetectors. The APD principle of operation is based on photocurrent multiplication through impact ionization in reverse-biased p-n junctions. APDs can either operate in proportional mode, where the bias voltage is below breakdown, or in Geiger mode, where the bias voltage is above breakdown. In proportional mode, the multiplication gain is finite, thus allowing for photon energy discrimination, while in Geiger mode of operation the multiplication gain is virtually infinite and a self-sustaining avalanche may be triggered, thus allowing detection of single photons5. Here, we demonstrate APDs based on vertically stacked monolayer MoS2 and p-Si, forming an abrupt p-n heterojunction. With this device, we demonstrate carrier multiplication exceeding 1000. Even though such multiplication factors in APDs are commonly accompanied by high noise, our devices show extremely low noise levels comparable with those in regular photodiodes. These heterostructures allow the realization of simple and inexpensive high-performance and low-noise photon counters based on transition metal dichalcogenides.

Two-dimensional semiconductors such as MoS2 are an emerging material family with wide-ranging potential applications in electronics, optoelectronics and energy harvesting. Large-area growth methods are needed to open the way to the applications. While significant progress to this goal was made, control over lattice orientation during growth still remains a challenge. This is needed in order to minimize or even avoid the formation of grain boundaries which can be detrimental to electrical, optical and mechanical properties of MoS2 and other 2D semiconductors. Here, we report on the uniform growth of high-quality centimeter-scale continuous monolayer MoS2 with control over lattice orientation. Using transmission electron microscopy we show that the monolayer film is composed of coalescing single islands that share a predominant lattice orientation due to an epitaxial growth mechanism. Raman and photoluminescence spectra confirm the high quality of the grown material. Optical absorbance spectra acquired over large areas show new features in the high-energy part of the spectrum, indicating that MoS2 could also be interesting for harvesting this region of the solar spectrum and fabrication of UV-sensitive photodetectors. Even though the interaction between the growth substrate and MoS2 is strong enough to induce lattice alignment, we can easily transfer the grown material and fabricate field-effect transistors on SiO2 substrates showing mobility superior to the exfoliated material.

In our previous paper, we reported on switchable monolayer MoS2 transistors with a high on-off ratio and we claim that dielectric screening can be used to increase the mobility of monolayer MoS2. We estimated its mobility using a method previously applied by Lemme et al. to top-gated graphene nanoribbons. We discuss here the comments raised by M. Fuhrer and J. Hone in their post 1301.4288 and give our own estimates of the possible errors in previous mobility measurements and their origins., Submitted

We present a transient absorption setup combining broadband detection over the visible-UV range with high temporal resolution ($\sim$20fs) which is ideally suited to trigger and detect vibrational coherences in different classes of materials. We generate and detect coherent phonons (CPs) in single layer (1L) MoS$_2$, as a representative semiconducting 1L-transition metal dichalcogenide (TMD), where the confined dynamical interaction between excitons and phonons is unexplored. The coherent oscillatory motion of the out-of-plane $A'_{1}$ phonons, triggered by the ultrashort laser pulses, dynamically modulates the excitonic resonances on a timescale of few tens fs. We observe an enhancement by almost two orders of magnitude of the CP amplitude when detected in resonance with the C exciton peak, combined with a resonant enhancement of CP generation efficiency. Ab initio calculations of the change in 1L-MoS$_2$ band structure induced by the $A'_{1}$ phonon displacement confirm a strong coupling with the C exciton. The resonant behavior of the CP amplitude follows the same spectral profile of the calculated Raman susceptibility tensor. This demonstrates that CP excitation in 1L-MoS$_2$ can be described as a Raman-like scattering process. These results explain the CP generation process in 1L-TMDs, paving the way for coherent all-optical control of excitons in layered materials in the THz frequency range.