Search

The work describes the interactions of nanosilver (NAg) with bacterial cell envelope components at a molecular level and how this associates with the reactive oxygen species (ROS)-mediated toxicity of the nanoparticle. Major structural changes were detected in cell envelope biomolecules as a result of damages in functional moieties, such as the saccharides, amides, and phosphodiesters. NAg exposure disintegrates the glycan backbone in the major cell wall component peptidoglycan, causes complete breakdown of lipoteichoic acid, and disrupts the phosphate-amine and fatty acid groups in phosphatidylethanolamine, a membrane phospholipid. Consistent with the oxidative attacks, we propose that the observed cell envelope damages are inflicted, at least in part, by the reactive oxygen radicals being generated by the nanoparticle during its leaching process, abiotically, without cells. The cell envelope targeting, especially those on the inner membrane phospholipid, is likely to then trigger the rapid generation of lethal levels of cellular superoxide (O 2 •- ) and hydroxyl (OH • ) radicals herein seen with a model bacterium. The present study provides a better understanding of the antibacterial mechanisms of NAg, whereby ROS generation could be both the cause and consequence of the toxicity, associated with the initial cell envelope targeting by the nanoparticle.

The past decade has seen the incorporation of antimicrobial nanosilver (NAg) into medical devices, and, increasingly, in everyday 'antibacterial' products. With the continued rise of antibiotic resistant bacteria, there are concerns that these priority pathogens will also develop resistance to the extensively commercialized nanoparticle antimicrobials. Herein, this work reports the emergence of stable resistance traits to NAg in the WHO-listed priority pathogen Staphylococcus aureus, which has previously been suggested to have no, or very low, capacity for silver resistance. With no native presence of genetically encoded silver defence mechanisms, the work showed that the bacterium is dependent on mutation of physiologically essential genes, including those involved in nucleotide synthesis and oxidative stress defence. While some mutations were uniquely associated with resistance to NAg, the study also found common mutations that could be protective against both NAg and ionic silver. This is consistent with the observation of NAg/ionic silver cross-resistance. These mutations were detected following withdrawal of the silver exposure, denoting heritable characteristics that allow for spread of the resistance traits even with discontinued silver use. Heritable silver resistance in priority pathogen cautions that these nanoparticle antimicrobials should only be used as needed, to preserve their efficacy for treating infections.

Nanosilver (Ag NPs) is currently one of the most commercialized antimicrobial nanoparticles with as yet, still unresolved cytotoxicity origins. To date, research efforts have mostly described the antimicrobial contribution from the leaching of soluble silver, while the undissolved solid Ag particulates are often considered as being microbiologically inert, serving only as source of the cytotoxic Ag ions. Here, we show the rapid stimulation of lethal cellular oxidative stress in bacteria by the presence of the undissolved Ag particulates. The cytotoxicity characteristics are distinct from those arising from the leached soluble Ag, the latter being locked in organic complexes. The work also highlights the unique oxidative stress-independent bacterial toxicity of silver salt. Taken together, the findings advocate that future enquiries on the antimicrobial potency and also importantly, the environmental and clinical impact of Ag NPs use, should pay attention to the potential bacterial toxicological responses to the undissolved Ag particulates, rather than just to the leaching of soluble silver. The findings also put into question the common use of silver salt as model material for evaluating bacterial toxicity of Ag NPs.

In this era of increasing antibiotic resistance, the use of alternative antimicrobials such as silver has become more widespread. Superior antimicrobial activity has been provided through fabrication of silver nanoparticles or nanosilver (NAg), which imparts cytotoxic actions distinct from those of bulk silver. In the wake of the recent discoveries of bacterial resistance to NAg and its rising incorporation in medical and consumer goods such as wound dressings and dietary supplements, we argue that there is an urgent need to monitor the prevalence and spread of NAg microbial resistance. In this Perspective, we describe how the use of NAg in commercially available products facilitates prolonged microorganism exposure to bioavailable silver, which underpins the development of resistance. Furthermore, we advocate for a judicial approach toward NAg use in order to preserve its efficacy and to avoid environmental disruption.

Silica particles were prepared by flame spray pyrolysis (FSP) as a support for nickel catalysts. The impact of precursor feed rate (3, 5 and 7 mL/min) during FSP on the silica characteristics and the ensuing effect on catalytic performance for the carbon dioxide, or dry, reforming of methane (DRM) was probed. Increasing the precursor feed rate: (i) progressively lowered the silica surface area from ≈340 m2/g to ≈240 m2/g; (ii) altered the silanol groups on the silica surface; and (iii) introduced residual carbon-based surface species to the sample at the highest feed rate. The variations in silica properties altered the (5 wt %) nickel deposit characteristics which in turn impacted on the DRM reaction. As the silica surface area increased, the nickel dispersion increased which improved catalyst performance. The residual carbon-based species also appeared to improve nickel dispersion, and in turn catalyst activity, although not to the same extent as the change in silica surface area. The findings illustrate both the importance of silica support characteristics on the catalytic performance of nickel for the DRM reaction and the capacity for using FSP to control these characteristics.

Aiming to overcome the current limits for dye-sensitized solar cells (DSSC) to reach a higher solar energy conversion efficiency, this work set out to investigate the feasibility of combining a variety of preparation techniques that can finely tailor the optical and electrochemical properties of the photoanode material. The obtained tungsten doped mesoporous titania spheres exhibited significant enhancements of photocurrent and open-circuit voltage leading to an over 15% increase in cell efficiency. With a single layer 12 μm film, the W-doped photoanode reached a solar energy conversion efficiency of 8.9% which is far greater than a 5.7% efficiency obtained by the photoanode film prepared from Degussa P25 TiO2 nanoparticles. This was greatly attributed to the superior light scattering effect from the mesostructure and the increased electron injection driving-force from the down-shifted conduction band after doping.

The natural ability of Bacillus sp. to adapt to nanosilver cytotoxicity upon prolonged exposure is reported for the first time. The combined adaptive effects of nanosilver resistance and enhanced growth are induced under various intensities of nanosilver-stimulated cellular oxidative stress, ranging from only minimal cellular redox imbalance to the lethal levels of cellular ROS stimulation. An important implication of the present work is that such adaptive effects lead to the ultimate domination of nanosilver-resistant Bacillus sp. in the microbiota, to which nanosilver cytotoxicity is continuously applied., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The work investigates the eco-cytoxicity of submicron and nano TiO₂ and ZnO, arising from the unique interactions of freshwater microalga Chlamydomonas reinhardtii to soluble and undissolved components of the metal oxides. In a freshwater medium, submicron and nano TiO₂ exist as suspended aggregates with no-observable leaching. Submicron and nano ZnO undergo comparable concentration-dependent fractional leaching, and exist as dissolved zinc and aggregates of undissolved ZnO. Cellular internalisation of solid TiO₂ stimulates cellular ROS generation as an early stress response. The cellular redox imbalance was observed for both submicron and nano TiO₂ exposure, despite exhibiting benign effects on the alga proliferation (8-day EC50>100 mg TiO₂/L). Parallel exposure of C. reinhardtii to submicron and nano ZnO saw cellular uptake of both the leached zinc and solid ZnO and resulting in inhibition of the alga growth (8-day EC50≥0.01 mg ZnO/L). Despite the sensitivity, no zinc-induced cellular ROS generation was detected, even at 100 mg ZnO/L exposure. Taken together, the observations confront the generally accepted paradigm of cellular oxidative stress-mediated cytotoxicity of particles. The knowledge of speciation of particles and the corresponding stimulation of unique cellular responses and cytotoxicity is vital for assessment of the environmental implications of these materials., (Copyright © 2013 Elsevier B.V. All rights reserved.)

ZnO nanowire networks featuring excellent charge transport and light scattering properties are grown in situ within TiO(2) films. The resultant TiO(2) /ZnO composites, used as photoanodes, remarkably enhance the overall conversion efficiency of dye-sensitized solar cells (DSSCs) by 26.9%, compared to that of benchmark TiO(2) films., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

New sensation: A resistance-based biosensor uses gold-coated magnetic nanoparticles (Au@MNPs) functionalized with the antibiotic enrofloxin (see picture; purple), which bind to anti-enrofloxin as analyte (blue). The Au@MNPs can be magnetically assembled between electrodes, and the measured resistance R is a function of analyte concentration., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Exposure to fetal bovine serum (FBS) is shown herein to reduce the aggregate size of titanium dioxide (TiO(2)) nanoparticles, affecting uptake and consequent effect on A549 and H1299 human lung cell lines. Initially, the cellular uptake of the FBS-treated TiO(2) was lower than that of non-FBS-treated TiO(2). Expulsion of particles was then observed, followed by a second phase of uptake of FBS-treated TiO(2), resulting in an increase in the cellular content of FBS-treated TiO(2), eventually exceeding the amount by cells exposed to non-FBS-treated TiO(2). Surface adsorbed vitronectin and the clathrin-mediated endocytosis pathway were shown to regulate the uptake of TiO(2) into A549 cells, while the endocytosis mechanism responsible remains elusive for H1299. Intriguingly, nystatin treatment was shown to have the unexpected effect of increasing nanoparticle uptake into the A549 cells via an alternate endocytic pathway. The surface adsorbed serum components were found to provide some protection from the cytotoxic effect of endocytosed TiO(2) nanoparticles.

We demonstrate a general strategy to prepare Bi(2)WO(6)/Ag/N-TiO(2) film with double visible-light-active components bridged by Ag nanoparticles as an electron shuttle, which exhibits enhanced photocatalytic activity and photoelectrochemical performance under visible light., (This journal is © The Royal Society of Chemistry 2011)

Herein, we introduce the concept of utilizing conductive gold-coated magnetic nanoparticles as 'dispersible electrodes', which serve as the active element in the selective capture and direct electro-analytical quantification of analytes. This concept reduces response times and decreases detection limits by bringing the sensor to the analyte rather than the conventional paradigm of the analyte finding the sensor.

Physical and electrochemical properties of gold nanoparticle-based electrodes are highlighted. Polycrystalline gold electrodes are passivated by a self-assembled monolayer, then the immobilization of gold nanoparticles "switch on" the electrochemical reactivity of ruthenium. Herein, gap-mode Raman studies show that the location of the nanoparticles is on the top of the monolayer, meaning that the "switching on" cannot be attributed to a direct electrical contact between nanoparticles and the gold support. This "switching on" feature is also not affected by the size of the gold nanoparticles with a range of diameters between 4 and 67 nm. Further, the charge of the nanoparticles is investigated by grafting chemical groups onto the nanoparticles which is observed to alter the electron-transfer kinetics. The variation in rate constant however is insufficient to attribute the "switching on" phenomenon to a possible adsorption of the redox species onto the nanoparticles.

The vast chemical and structural tunability of metal–organic frameworks (MOFs) are beginning to be harnessed as functional supports for catalytic nanoparticles spanning a range of applications. However, a lack of straightforward methods for producing nanoparticle‐encapsulated MOFs as efficient heterogeneous catalysts limits their usage. Herein, a mixed‐metal MOF, NiMg‐MOF‐74, is utilized as a template to disperse small Ni nanoclusters throughout the parent MOF. By exploiting the difference in NiO and MgO coordination bond strength, Ni2+ is selectively reduced to form highly dispersed Ni nanoclusters constrained by the parent MOF pore diameter, while Mg2+ remains coordinated in the framework. By varying the ratio of Ni to Mg in the parent MOF, accessible surface area and crystallinity can be tuned upon thermal treatment, influencing CO2 adsorption capacity and hydrogenation selectivity. The resulting Ni nanoclusters prove to be an active catalyst for CO2 methanation and are examined using extended X‐ray absorption fine structure and X‐ray photoelectron spectroscopy. By preserving a segment of the Mg2+‐containing MOF framework, the composite system retains a portion of its CO2 adsorption capacity while continuing to deliver catalytic activity. The approach is thus critical for designing materials that can bridge the gap between carbon capture and CO2 utilization. [ABSTRACT FROM AUTHOR]

Abstract: This work demonstrated the absence of surface terminal hydroxyl groups plays a key role in the photocatalytic oxidation of low concentration volatile organic compounds. Probed by 1H MAS NMR spectroscopy, we showed the synthesis of bare and F-TiO2 nanoparticles with undetectably low content of terminal hydroxyl groups (TiOH) on the surface of TiO2 could be obtained through a sol–gel process. The characterization results by N2 adsorption, XRD, HRTEM, Raman, and XPS show that the bare TiO2 and F-TiO2 have almost identical bulk and surface structural properties. The photocatalytic activity was evaluated by photocatalytic oxidation of acetaldehyde and ethanol. Due to the absence of terminal TiOH in the bare TiO2 and F-TiO2, both materials exhibit 100% photodegradation of acetaldehyde and ethanol. No deactivation was observed during the experimental period of 8 days. The activities surpassed the photodegradation performance of the benchmarking Aeroxide P25 TiO2 under similar conditions (93%). On the bare TiO2, only stoichiometric CO2 production was observed and no detectable by-product existed in the product stream, resulting in no expanded off-odor problems. On the contrary, ethanol photodegradation on F-TiO2 produced minor acetaldehyde as a by-product, but the amount of acetaldehyde produced was still lower than that produced on Aeroxide P25. [Copyright &y& Elsevier]

Metal foams are highly sought‐after porous structures for heterogeneous catalysis, which are fabricated by templating, injecting gas, or admixing blowing agents into a metallic melt at high temperatures. They also require additional catalytic material coating. Here, a low‐melting‐point liquid metal is devised for the single‐step formation of catalytic foams in mild aqueous environments. A hybrid catalytic foam fabrication process is presented via simultaneous chemical foaming, melting, and sintering reaction of liquid metal nanoparticles. As a model, nanoparticles of tertiary low‐melting‐point eutectic alloy of indium, bismuth, and tin (Field's metal) are processed with sodium hydrogen carbonate, an environmentally benign blowing agent. The competing endothermic foaming and exothermic sintering reactions are triggered by an aqueous acidic bath. The overall foaming process occurs at a localized temperature above 200 °C, producing submicron‐ to micron‐sized open‐cell pore foams with conductive cores and semiconducting surface decorations. The catalytic properties of the metal foams are explored for a range of applications including photo‐electrocatalysis, bacteria electrofiltration, and CO2 electroconversion. In particular, the Field's metal‐based foams show exceptional CO2 electrochemical conversion performance at low applied voltages. The facile process presented here can be extended to other low‐temperature post transition and transition metal alloys. [ABSTRACT FROM AUTHOR]