Search

A broadband absorber that utilizes a dispersive metamaterial and covers the entire microwave X-band (8–12 GHz) is proposed in the present study. An ideal absorber attached to the surface of a perfect electric conductor requires the permittivity of the absorbing layer to be anomalously dispersive in the targeted broad frequency band. We show that anomalous dispersion of the permittivity for the X-band can be fitted to a two-pole Lorentz oscillator model and realized with the use of a double-layered, square-loop metamaterial. We explain the connection between the two-pole oscillator model and the double-layered, square-loop metamaterial using an equivalent circuit model and present explicit design rules for the metamaterial. We fabricate a 4-mm-thick metamaterial absorber with flexible silicon rubber, a resistor element, and conductive wire using carbon and silver conductive ink. Our metamaterial absorber achieves a reflectance of less than −20 dB over the entire X-band region.

A full-wave analytical method using the addition theorems and Hertzian potential functions are used to compute the radar cross section of a sphere coated by several layers composed of common materials and metamaterials. The minimization and maximization of radar cross section of a perfectly electric conductor sphere with such coatings are realized in a frequency band-width and in a wide interval of angles. One of the novelities of this contribution is, taking into dispersion relations of physically realizable metamaterials. So that the optimization procedure for RCS reduction is applied due to the coefficients describing dispersion characteristics. The method of least square is used for the design of a class of radar absorbing materials. The minimization of the error functions are performed by the combination of genetic algorithm and conjugate gradient method. It is shown that the proposed method of computation of radar cross section and its extremization effectively leads to the design of dispersive and isotropic metamaterials for the realization of radar absorbing materials. [ABSTRACT FROM AUTHOR]

Aerospace structures can be approximately modeled as a combination of canonical structures such as cylinder, cone and ellipsoid. Thus the RCS estimation of such canonical structures is of prime interest. Furthermore metamaterials possess peculiar electromagnetic properties which can be useful in modifying the RCS of structures. This paper is aimed at calculating the RCS of an infinitely long PEC circular cylinder coated with one or two layers of metamaterial. The incident and scattered fields of coated cylinder are expressed in terms of series summation of Bessel and Hankel functions. The unknown coefficients of summation are obtained by applying appropriate boundary conditions. The computations are carried out for both principal polarizations. The computed results are validated against the numericalbased method of moments. Further, the variation of RCS of the metamaterial coated PEC cylinder with material parameters, frequency, aspect angle and polarization is analyzed. [ABSTRACT FROM AUTHOR]

Electromagnetic scattering from an infinite and a finite length PEMC circular cylinder, illuminated by an arbitrarily oriented dipole, is investigated theoretically. An electric dipole as a source of excitation is considered first, and then a magnetic dipole as a source of excitation is treated. In contrast to the case of an axially directed dipole, it is shown that no additional terms are needed to incorporate the cross-polarized component of the field for the case of radial and circumferential dipoles. Numerical verifications are presented to verify the validity of derived results and numerical code by comparing results with the published literature. [ABSTRACT FROM AUTHOR]

Abstract A full-wave analytical method using the addition theorems and Hertzian potential functions are used to compute the radar cross section of a sphere coated by several layers composed of common materials and metamaterials. The minimization and maximization of radar cross section of a perfectly electric conductor sphere with such coatings are realized in a frequency band-width and in a wide interval of angles. One of the novelities of this contribution is, taking into dispersion relations of physically realizable metamaterials. So that the optimization procedure for RCS reduction is applied due to the coefficients describing dispersion characteristics. The method of least square is used for the design of a class of radar absorbing materials. The minimization of the error functions are performed by the combination of genetic algorithm and conjugate gradient method. It is shown that the proposed method of computation of radar cross section and its extremization effectively leads to the design of dispersive and isotropic metamaterials for the realization of radar absorbing materials.