Search

Hydrogen production from natural gas or biogas, at different purity levels, has emerged as an important technology with continuous development and improvement in order to stand for sustainable and clean energy. Regarding biogas, which can be obtained from multiple sources, hydrogen production through the steam reforming of methane is one of the most important methods for its energy use. In that sense, the role of catalysts to make the process more efficient is crucial, normally contributing to a higher hydrogen yield under milder reaction conditions in the final product. The aim of this review is to cover the main points related to these catalysts, as every aspect counts and has an influence on the use of these catalysts during this specific process (from the feedstocks used for biogas production or the biodigestion process to the purification of the hydrogen produced). Thus, a thorough review of hydrogen production through biogas steam reforming was carried out, with a special emphasis on the influence of different variables on its catalytic performance. Also, the most common catalysts used in this process, as well as the main deactivation mechanisms and their possible solutions are included, supported by the most recent studies about these subjects. [ABSTRACT FROM AUTHOR]

Hydrogen as an energy vector is going to play an important role in the global energy mix. On the other hand, wastewater management has become a worldwide concern, as urban settlements have been considerably increasing for decades. Consequently, biodigestion to produce biogas (rich in methane) in water treatment plants could be an interesting starting point to obtain a valuable gas that can be converted into hydrogen through steam reforming. The aim of this work was to review the main aspects concerning steam reforming of biogas from wastewater treatment plants. For this purpose, the whole chain, from water treatment to hydrogen production and purification, was considered, paying attention to the main challenges and new technologies for its optimization. Thus, a wide range of possibilities is offered, from direct energy use of syngas to high purification of hydrogen (mainly through pressure swing adsorption or membrane reactors), presenting advantages and disadvantages. In any case, the role of catalysts seems to be essential, and aspects such as hydrogen sulfide and coke deposition control should be addressed. In conclusion, biogas steam reforming applied to wastewater treatment plants is a reality, with serious possibilities for its global implementation at the industrial level, according to techno-economic assessment. [ABSTRACT FROM AUTHOR]