Search

There is currently a great demand for sustainable and bio-derived coatings for fiber-based packaging materials, which are technically implementable with a high performance. The aim of this work was to investigate the grease resistance of coatings prepared from methyl nanocellulose when applied on paperboard. Co-additives selected from native microfibrillated cellulose (MFC) and hydrophobically modified ethyl(hydroxyethyl)cellulose (EHEC) were used in order to determine their impact on film formation and crack resistance for folds. Small and moderate coat weights were applied in order to determine the critical coat weight for the barrier properties. It was found that high grease resistance can be achieved with methyl nanocellulose and a combination of methyl nanocellulose and MFC coatings. Contact angle determinations for water on uncoated and coated materials showed that EHEC-MFC films have a very high contact angle which is due to both the surface chemistry and roughness. This indicates and confirms that EHEC may facilitate the wetting of oil and greases. Methyl nanocellulose mixed with hydrophobically modified EHEC significantly changed the barrier properties indicating a change in the film formation. [ABSTRACT FROM AUTHOR]

Foams were prepared from hydrophobically modified ethyl(hydroxyethyl) cellulose (EHEC), methyl nanocellulose, and native microfibrillated cellulose (MFC). Their film- and foam-forming abilities, stabilities, and suitabilities for foam coating on different substrates were investigated. The role of EHEC as a polymeric stabilizing agent was also studied. The EHEC-MFC foams showed greater stability and water-holding ability under pressurized dewatering than MFC foams prepared in the presence of a surfactant. A foam could be created with methyl nanocellulose without any foaming agent. Selected nanocellulose gels and foam formulations were used to coat various substrates. The surface was efficiently closed by gel and foam coatings prepared from the methyl nanocellulose and EHEC solutions, which was ascribed to good coating holdout. Coatings on papers with different levels of smoothness/density and hydrophobicity/ hydrophilicity confirmed that foam-substrate interactions affected the coat quality. The air permeance was reduced by 99% and 64% with a methyl nanocellulose coating and an EHEC-MFC coating, respectively. An EHEC-MFC coating created a hydrophobic surface on a hydrophilic substrate, and methyl nanocellulose improved the oil resistance even at a low coat weight. [ABSTRACT FROM AUTHOR]