Search

The main aim of this study is to analyse the electrically conductive flow of compressible liquids by two infinitely permeable surfaces. The distance between the two surfaces is hh. Thermal relation consists of viscous dissipation. The entropy features along with magnetic force and dissipation are taken into account. The x-axis extends in the flow path along the bottom stationary plate, whereas the y-axis is orthogonal to the surfaces. The channel plates are subjected to a consistent transverse magnetic field that is implemented perpendicularly. Herein, two scenarios are investigated: the first is the Couette flow, and in the second scenario, both porous surfaces are parallel and fixed at a distance of 2h, and the motion is a Poiseuille flow controlled by pressure. The flow across the xx-axis is supposed to be generated and dependent on yy exclusively. The governed system is solved using analytical solutions. It is found that the entropy formation is higher near the cloud porous plate in comparison to the hot porous plate and the increasing values of the suction/injection parameter increase the fluid temperature. The increase in the magnetic field parameter decreases the momentum boundary layer thickness. The Brinkman number improves the thermal boundary thickness. The magnetic field parameter, suction/injection, and the Brinkman number accelerate the entropy formation in both cases.

In this paper, we investigate the analysis of Oldroyd 8-constant fluid flow with nanoparticle suspension via a porous media during the coating of wire is carried out. A constant magnetic field and electrically conducting fluid are considered. The governing equations thus obtained for the present model are converted to nonlinear differential equations using variables in dimensionless form. These equations are analytically solved. The influence of some parameters, like magnetic field parameter, porosity parameter, dilatant constant, pseudo-plastic constant and Brinkman number on velocity and temperature distributions are discussed graphically. For fluctuating viscosity, two models, Reynold's and Vogel's are considered. It is observed that the magnetic parameter and the Brinkman number increase, both temperature and velocity profiles show a retarding effect in both Reynold's and Vogel's models. [ABSTRACT FROM AUTHOR]

The researchers explored the free convective flow of a hybrid nanofluid in a vertical microchannel with a rectangular cross‐section. Notably, both channel walls were heated alternately, and a transverse magnetic field was applied across the channel. The channel walls had unique properties, one of which was nonslip and the other was exceedingly hydrophobic. The major purpose was to investigate the effects of magnetism and superhydrophobicity on important flow parameters. The differential equations in the investigation were solved, producing accurate results. The study yielded some significant discoveries. First, when heated, the magnetic parameter reduced skin friction on both sides. Second, in both heating conditions, the magnetic field reduced flow rate and velocity. The flow rates in the two reported situations were similar at a crucial temperature jump coefficient. Furthermore, for low‐temperature jump coefficients, heating the superhydrophobic side reduced the Nusselt number whereas heating the nonslip side had no magnetic effect. The percentage change in the value of Nusselt number and velocity decreases continuously with increase in nonlinear density variation with temperature (NDT) parameter and magnetic parameter. The percentage increases in the value of skin friction with increase in temperature jump and slip length but decrease in the percentage of skin friction for the effect of magnetic term and NDT parameter. As the NDT parameter increases, the velocity percentage rises to 50.59% when the superhydrophobic surface is heated and to 84.30% when the nonslip surface is heated. The temperature jump is statistically significant for the value of the Nusselt number and skin friction for the no‐slip surface condition. These discoveries have practical consequences for the design and management of both tiny and large‐scale systems, with possible applications in microfluidics, microelectronics, nanoscience, and nanotechnology. [ABSTRACT FROM AUTHOR]

The utilization of a ternary hybrid nanofluid, a recent development in the realm of nanofluids, can result in improved heat transfer. In the ongoing study, a ternary hybrid nanofluid flow is utilized, and it is carried out atop a porous spinning disc, which is exposed to a magnetic field, heat generation, thermal radiation, and Casson fluid. In this study, Blood/Water are taken as base fluids and (Ag–Au–Al2O3) are considered as a ternary hybrid nanoparticle. Nanoparticles made of gold and silver are put to use in a vast number of industries and fields, including nanotechnology and medicine. As a result of surface effects and quantum effects, these precious metals exhibit unique features in nanoform that play a vital role in with optical, magnetic, chemical, and mechanical behavior. Al2O3 unique optical, physical and biochemical qualities make it worthwhile for numerous uses, including nanophotonic, catalysis and the fabrication of high-energy composites. A set of relevant similarity transformations is used to generate non-dimensional forms of controlling paired nonlinear Partial Differential Equations (PDEs). MATLAB is used to perform a numerical solution with ODE45. In addition, the velocity outline decreases, and the temperature profile increases slightly before decreasing over a revolving disk when the values of magnetic parameters are increased. The distribution and radiant heat components heat up as the level gets higher. Aim and objectives of the study: The aim of this study is to analyze the Comprehensive Scrutinization of Ternary hybrid and Casson flow in a conducting porous rotating disk with internal heating. The primary objective of this analysis is to increase awareness of the impending energy crisis among those working in the industrial and technological sectors. Ternary nanoparticles (NPs) have a wide range of applications, which lends credence to the developed model. For example, Al2O3 can be used in a variety of ways that benefit society, it is used in water purification to remove water from the gas streams and extend people's lives. [ABSTRACT FROM AUTHOR]

Analyzed in this paper is an investigation of the impacts of the varying source of heat or thermal sink and viscous dissipation on Casson fluid flow from a moving wedge by considering thermal and momentum slips in a mathematical model. Regarding the regulation of concentration fields, we incorporated the Soret and Dufour phenomena. The outcomes are analyzed numerically by using the shooting technique. The governing parametric effects of the flow characteristics are revealed graphically. We also presented the local Sherwood and Nusselt number values for non-Newtonian fluid (Casson fluid) and Newtonian. It is discovered that the thermal and concentration boundary layer is more extensive in Casson fluid while equated with the Newtonian fluid. The thermal and mass transmission in Newtonian fluid is significantly larger than in non-Newtonian fluid. The heat source/sink, Eckert number and Dufour number boost the rate of thermal transport and depreciate the rate of mass transport for both the Newtonian and non-Newtonian fluid cases. [ABSTRACT FROM AUTHOR]

The use of heat transfers in heat exchangers, nuclear cooling, solar collectors, and electrical devices is crucial nowadays. Hybrid nanofluid can be used in these applications to get the best results because it encourages efficient heat transmission compared to conventional fluid. The effect of radiation and an unsteady Carreau hybrid fluid in addition to non-Fourier heat flux over a shrinking sheet is discussed in this paper. Using similarity transformations, the newly developed system of partial differential equations (PDEs) is converted into a set of ordinary differential equations (ODEs), that are next numerically addressed by utilizing shooting approach and the Runge–Kutta (RK) method. Tables and graphs are used to present utilizing the computational findings for nondimensional temperature, velocity, heat transfer rate, and friction between fluid and hybrid nanoparticles. Additionally, for certain physical factors, the physical quantities in numerical values were also presented (such as the friction factor and local Nusselt number). We made a restricted case comparison between the current findings and the body of prior research. Our finding confirms that the temperature profile is strengthened by the heat generation parameter and the effect of radiation. The porosity parameter decelerates the momentum boundary layer thickness near the plate. [ABSTRACT FROM AUTHOR]

In most of practical situation multiple slips (velocity, temperature and concentration) has importance in manufacturing, medicinal, imaging processes and design of materials. In view of this, the present work considered the multiple slips on Magneto hydrodynamic (MHD) dissipative non-Newtonian fluid (Casson fluid) above a curved type of a stretching surface are studied. Multiple slips with Casson fluid have significance in controlling the blood flow distribution in human and animal bodies. The R–K fourth-order via shooting technique is used to convert the nonlinear governing equations. The impact of governing parameters is shown and explored graphically. The present investigation explores the multiple slip effects in governing equations under the influence of the magnetic field; the fluid's temperature and velocity have reverse characteristics. In a few unique situations, the current findings have been in reasonable agreement with the current results. As opposed to when viscous dissipation is absent, the temperature distribution is higher when viscous dissipation is present. It helps us to decide depending on the industrial and manufacturing processes, whether dissipation has to be applied or not. The stretching parameter enhances the Skin friction coefficient and rate of heat transfer, while decreases the rate of mass transfer. Also, the fluid's temperature decreases because an increase in Casson fluid parameter enhances the plastic dynamic viscosity, which creates resistance in the fluid motion. [ABSTRACT FROM AUTHOR]

In this investigation, the flow of an unsteady mixed convection boundary layer viscous nanofluid on a stretchable sheet is considered. The flow examination is affected by a magnetic field. The reason for the examination exhibited is to create models for nanomaterials that incorporate the Brownian movement and thermophoresis phenomena. The created nonlinear standard differential condition is illuminated numerically utilizing the Runge"Kutta"Gill technique and the start program. The different factors of speed, temperature, and concentration are reported and discussed. The examination shows that the speed, temperature, and concentration are lower in contrast with the consistent stream on account of an assisting flow, whereas the opposite situation is noticed in the opposing flow case. The effects of Brownian movement and thermophoresis in the concentration case are totally different. [ABSTRACT FROM AUTHOR]

In the present paper, the flow of an incompressible, electrically conducting dusty fluid over a stretching sheet is considered. The Cattaneo- Christov heat flux theory is employed to control the thermal boundary layer. The flow equations are transformed into nonlinear ordinary differential equations (NODEs) and which are solved with help of Runge-Kutta 4th order method. Flow equations are examined with respect to boundary conditions namely prescribed wall temperature (PWT) and prescribed heat flux (PHF) cases. In general PWT and PHF boundary conditions are very useful in the industrial as well as manufacturing up and down processes. Impact of the emerging parameters on the dimensionless velocity and temperature aswell as friction coefficient and localNusselt number are examined. We also validated my results with already available literature. It is found that the heat transfer rate of the flow in PWT case is higher than that of PHF case. These results can help us to conclude that for higher heating processes (Heating industries) PWT case and lesser heating processes (Cooling industries) PHF boundary condition is useful. [ABSTRACT FROM AUTHOR]

In this study we analyze the boundary layer flow of a thermophoretic magnetohydrodynamic dissipative nanofluid over an unsteady stretching sheet in a porous medium with space and time dependent internal heat source/sink. The governing equations are transformed to ordinary differential equations by using similarity transformation. Numerical solutions of these equations are obtained by using the Shooting Technique. The effects of non-dimensional governing parameters on the velocity, temperature, concentration profiles, friction factor, Nusselt and Sherwood numbers are discussed and presented through graphs and tables. Accuracy of the results compared with the existing ones. Excellent agreement is found with earlier studies. [ABSTRACT FROM AUTHOR]

We study the velocity, thermal, and mass slips on chemically reacting magnetohydrodynamic boundary layer flow over a radiated stretching surface in the presence of suction. The governing momentum boundary layer and thermal boundary layer equations with boundary conditions are transformed into a system of nonlinear ordinary differential equations that are solved numerically using the Runge-Kutta-Fehlberg method. The involved differential systems are solved for velocity, temperature, and mass fraction. Graphical and numerical results are described for the analysis of various parameters of attention entering the modeled problems. Various tables are constructed to show rheological effects of different physical parameters. Combined effects of thermal and concentration jump are analyzed. We found that the slips have the propensity to control boundary layer flow. Velocity, temperature, and concentration show the increasing nature before and after a point, as the velocity slip increases and the momentum, thermal, and concentration boundary layer thickness become thinner for velocity slip. [ABSTRACT FROM AUTHOR]