Search

Lipophile induced modulations of self-assembly characteristics in aqueous Pluronic systems merit attention because of wide-ranging uses of Pluronics as solubilizing agents of lipophilic substances. In this paper, we report unusual evolutions of structural and hydration properties in lavender essential oil (LO) solubilized Pluronic P85 aqueous micellar systems as a function of micellar volume fraction and temperature. Our DLS, SANS, and viscometry studies show that the spherical-to-wormlike micellar structural transition observed in 1% P85 solutions upon solubilization of LO quite unexpectedly gets suppressed with increased P85 concentration to ≥5%. Detailed SANS studies reveal that the core sizes of the oil solubilized micelles cannot attain the threshold value required for the onset of structural transition at higher copolymer concentrations due to their progressive shrinking with an increase in P85 concentration. Oil solubilized P85 solutions show two cloud points and very interestingly exhibit micellar growth upon cooling to their lower cloud points. Steady state fluorescence studies explain this based on increasing dehydration of micellar corona with a decrease in temperature, very much opposite to what is observed in pure aqueous Pluronic systems. The results give new insight into viscous flow properties and low temperature storage possibilities of oil solubilized aqueous Pluronic systems.

Amphiphilic diblock copolymers containing dopamine and zwitterions are synthesized via the RAFT polymerization method, which undergo temperature-mediated micellization in aqueous media. The presence of catechol moiety in dopamine is exploited to form pH-responsive cross-links with ferric ions (Fe 3+ ) at different pH value. Herein, a comprehensive study of the effect of pH as well as temperature on the size and solution behavior of these cross-linked micelles is presented. These micelles cross-linked via metal-catechol coordination bonds can have several important biomedical applications such as degradable scaffolds for payload delivery., (© 2021 Wiley-VCH GmbH.)

Polysorbate 80 is one of the most widely used solubilizing agents in food, cosmetic and pharmaceutical industries. Influences of different classes of solubilizates and additives on its self-assembly characteristics are however, not sufficiently understood yet. In this manuscript, we show how common water structure making salt NaCl, and lipophilic phytochemicals like curcumin and lavender oil help in modulating the structure of Polysorbate 80 micelles in aqueous medium. Our DLS, SANS and rheological studies show that NaCl induces sphere-to-rod growth of polysorbate 80 micelles at the room temperature. Micellar solubilizations of the phytochemicals, which were found to be facilitated with increase in temperature, induce only a marginal growth of the micelles up to the highest level of solubilization. Their presence however, helps in modulating the NaCl induced micellar growth behavior in the tween 80 solutions leading to observation of micelle-to-vesicle structural transition at 2% lavender oil concentration. The phytochemical solubilized micellar solutions could be converted to alginate based hydrogel beads and patches that can freely release micellar phytochemical in aqueous medium. Our results shed light on possible ways of modulating the solubilization behavior, self-assembly characteristics and rheological properties of aqueous system of polysorbate 80, which could be important for their applications., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Wide therapeutic potential combined with low cost and negligible toxicity makes curcumin one of the most sought after drugs in recent times. Its poor aqueous solubility and low bioavailability are often overcome by using micelles and vesicles as its carriers. The substances that are commonly used for this purpose are a class of nonionic surfactants called pluronics. Solubilization of curcumin in aqueous systems of these surfactants is carried out by thin film hydration method presumably because slow dynamics of micellar restructuring processes in them creates hindrance for direct solubilization. In this manuscript, we show that this problem can be overcome and curcumin can be solubilized directly in pluronic P123 micellar solutions by heating them to the phase separation temperature in the presence of curcumin. The obtained curcumin containing micellar solutions show cytotoxicity on human breast carcinoma (MCF7) cells with IC 50 values similar to that shown by free curcumin solution. Addition of mucoadhesive polymer κ-Carrageenan into these solutions converts them to curcumin containing gels and patches with rheological properties suitable for topical application. These solutions also exhibit systematic spherical-to-worm like micellar-to-vesicular structural transitions in the presence of NaCl. The large curcumin containing aggregates thus formed show kinetic stability with respect to dilution, which is an important attribute for drug delivery application. Characterization of the micellar and vesicular systems and gels were carried out by SANS, DLS and rheological measurements. The obtained results represent first systematic study on solubilization of curcumin in pluronic aggregates of various shapes and size., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Pluronics(®) are an important class of non-ionic surfactants because of their rich phase behavior and numerous industrial and biomedical applications. F127, an FDA approved Pluronic(®) is the most prominent member amongst them owing to its potential uses as vehicle for drug delivery and template for the fabrication of mesoporous materials. A cubic micellar gel formed by this copolymer above 15 wt% concentration is the commonly used form of self assembled structure for these applications. In this manuscript we report SANS, fluorescence and rheological studies on the effect of n-butanol on gelation characteristics of aqueous F127 solutions. The studies show that solubilization of n-butanol results in a large increase in viscosity of micellar solution at a fixed copolymer concentration, and leads to the formation of stiff gel at F127 concentration as low as 9 wt%. SANS and fluorescence studies attribute this to enhancement in micellar solvation due to solubilization of n-butanol. Quite interestingly, SANS studies show that n-butanol induced F127 gels form at significantly lower micellar volume fraction than the pure F127 gels. The observed improvement in gelation characteristics can have important bearing with the application in making mesoporous materials since n-butanol is used as co-surfactant to control pore size of such structures formed with F127 gels as template., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The influence of methyl paraben (MP) and butyl paraben (BP) on the aggregation characteristics of Pluronics in an aqueous medium has been investigated by DLS, SANS, viscometry, and fluorescence measurement techniques. Parabens are extensively used as preservatives in cosmetic, pharmaceutical, and food products. In this paper, we show that their influence on the restructuring and growth of Pluronics micelles vary quite significantly with their aqueous solubility and with the composition of Pluronics. In the case of P105 and P104, MP reduces the sphere-to-rod transition temperature down to room temperature, but BP with significantly less aqueous solubility than MP suppresses such micellar transition and leads to the formation of micellar clusters due to the onset of intermicellar attractive interaction. In the case of more hydrophobic Pluronic P103, on the other hand, both MP and BP are able to induce rapid room temperature sphere-to-rod micellar growth, which is not observed in the presence of water structure making salts like NaCl and Na(3)PO(4). These observations have been attributed to modulation of growth and restructuring processes of the Pluronic micelles arising due to different locations of parabens within the micellar corona as determined by their aqueous solubility and the hydrophobicity of the Pluronics.

Steady-state and time-resolved fluorescence anisotropy measurements using probes coumarin 153 (C153) and 4-heptadecylumbelliferon (HUF) have been carried out to understand the micelle to gel transition of an aqueous triblock copolymer P123 ((EO)(20)-(PO)(70)-(EO)(20)) (EO = ethylene oxide; PO = propylene oxide) solution. Anisotropy results with a normal fluorescent probe, C153, do not show a characteristic change due to the micelle to gel transition. However, the probe HUF having a long hydrocarbon chain that helps its strong association with the micelle shows an increase in anisotropy above the sol-gel transition point. This difference has been explained as invoking a substantial contribution from the micellar structural fluctuations to the depolarization of HUF as its hydrocarbon chain is embedded in the micellar structure, which is not sensed significantly by the normal probe C153. That the extent of change in anisotropy for HUF upon gelation is not that large is possibly caused by the collective motion of the physically interconnected nodes, as observed from the dynamic light scattering studies, which acts in favor of a relatively faster depolarization in the gel phase. Similar studies in other copolymers, such as P85 ((EO)(26)-(PO)(40)-(EO)(26)) and F127 ((EO)(100)-(PO)(65)-(EO)(100)), further demonstrate the potential of probes latched with hydrocarbon chains in displaying a characteristic change for the micelle to gel transition which otherwise remains obscured for normal fluorescent probes.

Dynamic Stokes' shift and fluorescence anisotropy measurements of coumarin 153 (C153) and coumarin 151 (C151) as fluorescence probes have been carried out to understand the influence of electrolytes (NaCl and LiCl) on the hydration behavior of aqueous (ethylene oxide)100-(propylene oxide)70-(ethylene oxide)100 (EO100-PO70-EO100, F127) block copolymer micelles. A small blue shift in the fluorescence spectra of C153 has been observed in presence of electrolytes due to the dehydration of the oxyethylene chains in the PEO-PPO region, although fluorescence spectra of C151 remain unaltered. The close vicinity of bulk water for C151 probably negates the effect of dehydration in the PEO region. Fluorescence anisotropy measurements indicate a gradual increase in microviscosity with electrolyte concentrations. The partial collapse of copolymer blocks in the presence of electrolytes has been suggested as a reason for the increase in microviscosity along with the strong hydration of ions in the corona region. The interplay between the ion hydration and the mechanically trapped water content, and specific interaction of ions, such as complexation of Li+ ions with the copolymer block, is found to control solvation dynamics in the corona region. In addition to that, it has been established that Na+ ions reside deep into the corona region whereas Li+ ions prefer to reside closer to the surface. Owing to its higher lyotropicity, LiCl influences the corona hydration to a greater extent than NaCl and sets in micelle-micelle interaction above the 2 M LiCl concentration, as reflected in the saturation of solvation time constants. The formation of larger clusters of F127 micelles above 2 M LiCl has been confirmed by dynamic light scattering measurements; however, such cluster formation is not evident with NaCl.

Curcumin, the principle active constituent of turmeric, is known to have broad range of therapeutic properties. Its poor aqueous solubility and low bioavailability however, act as constraints for its biomedical applications. Recent studies have shown that incorporation of curcumin in nano-carriers like micelles, vesicles, polymeric nanoparticles etc. can help in overcoming these issues and improve its therapeutic abilities quite significantly. In this manuscript, we report preparation of curcumin solubilized pluronic F127 micellar solutions and hydrogels, along with their structural and therapeutic properties as obtained from SANS, rheological, anti-cancer and wound healing studies. Pluronic F127 being approved by FDA has been used quite extensively as excipient for drug delivery applications. Curcumin solubilization in the aqueous pluronic F127 system was carried out by briefly heating the copolymer solutions with curcumin at 90 °C. The concentrations of curcumin thus obtained were found to be comparable to those obtained by conventional methods of solubilization like thin film hydration or solvent evaporation method, and three orders of magnitude higher than that in pure water. SANS and rheological studies show that curcumin solubilization does not bring about any significant change in the structural and rheological properties of F127 micellar solutions and hydrogels. Curcumin solubilized F127 micellar solutions can be reconstituted after lyophilization, suggesting that curcumin remains nano-dispersed in lyophilized state. Micellar encapsulated curcumin exhibits very good stability in solution state in ambient condition but fails to show cytotoxicity against MCF7 cancer cells, presumably due to shielding of curcumin by large corona region of F127 micelles. Micellar curcumin containing F127 hydrogels on the other hand, exhibit wound healing abilities in mice model upon topical application. The results give an account of how some of the therapeutic properties of curcumin are manifested under micellar encapsulation and the role of pluronic F127 as excipient in those therapeutic applications. Unlabelled Image • Properties of curcumin solubilized pluronic F127 solutions and hydrogels were studied. • Structure of F127 micelles doesn't change significantly upon curcumin solubilization. • Micellar encapsulation improves curcumin stability but suppresses its anticancer action. • This results because curcumin resides in the micellar core and corona acts as shield. • Curcumin solubilized F127 hydrogel exhibits wound healing abilities in mice model. [ABSTRACT FROM AUTHOR]

Highlights: [•] The effects of butan-1-ol and NaCl on the przoperties of F127 micelles were studied. [•] These two substances bring about site specific dehydration of F127 micelles. [•] Dehydration of micellar core by butan-1-ol leads to sphere-to-rod micellar growth. [•] Corona specific dehydration by NaCl induces inter-micellar attractive interaction. [ABSTRACT FROM AUTHOR]