Search

Cutting force modelling for micro machining is of great importance for better understanding of the cutting mechanics in the process. As precision machining of metal matrix composites (MMCs) is much more complex than machining homogeneous materials, the accurate prediction of cutting force is critical to control the cutting performance and tooling life. This paper presents an improved theoretical dynamic cutting force model in MMCs micro milling process by using straight flute PCD end mills. The theoretical model is modified and improved based on the conventional milling force modelling while taking account of various factors including tooling geometries, the material microstructure, size effect and chip formation in the cutting process. An innovative expression on dynamic cutting force in micromachining MMCs is presented through the multiscale modelling and analysis. The cutting force coefficients are further defined through instantaneous cutting force signals analysis. Simulation results under varied cutting process variables are presented against a series of MMCs micro milling trials, which indicate that the improved dynamic cutting force model can predict the cutting force accurately and reveal more details on the cutting force variations in the process due to the material inhomogeneous nature. In addition, the optimal process variables can be readily explored through the dynamic force modelling and simulations so as to further improve the cutting performance. [ABSTRACT FROM AUTHOR]

The effects of cutting dynamics and the particles' size and density cannot be ignored in micro milling of metal matrix composites. This article presents the improved dynamic cutting force modelling for micro milling of metal matrix composites based on the previous analytical model. This comprehensive improved cutting force model, taking the influence of the tool run-out, actual chip thickness and resultant tool tip trajectory into account, is evaluated and validated through well-designed machining trials. A series of side milling experiments using straight flutes polycrystalline diamond end mills are carried out on the metal matrix composite workpiece under various cutting conditions. Subsequently, the measured cutting forces are compensated by a Kalman filter to achieve the accurate cutting forces. These are further compared with the predicted cutting forces to validate the proposed dynamic cutting force model. The experimental results indicate that the predicted and measured cutting forces in micro milling of metal matrix composites are in good agreement. [ABSTRACT FROM AUTHOR]