Search

Nowadays, there is great interest in microbial fuel cells because of the different substrates that can be used in them for electric energy generation. In order to find an alternative and contribute with eco-friendly technologies, this research used the Serratia fonticola bacteria and Rhotula glutinis yeast as a fuel source through laboratory scale microbial fuel cells. A single chamber microbial fuel cell with air cathode was fabricated with a copper foil and a graphite plate as anode and cathode electrode respectively. For the characterization of the cells, physicochemical parameters such as voltage, electric current, pH and electrical conductivity were measured for 30 days and at room temperature (18 ± 2.2 °C). It was possible to generate peak voltage and current values of 0.53 ± 0.01 V and 0.55 ± 0.02 V and current values of 1.76 ± 0.16 mA and 1.52 ± 0.02 mA, for MFCs with bacteria and yeast respectively. In addition, acidic operating pH was observed, and its conductivity peak values around 242 mS/cm. Finally, this work demonstrates the great potential that microorganisms have for the generation of electric current, giving a new and promising way to generate electricity

This research aimed to use kiwi waste as fuel to generate bioelectricity through microbial fuel cells. It was possible to generate an electrical current and voltage peaks of 3.807 ± 0.102 mA and 0.993 ± 0.061 V on day 11, showing an electrical conductivity of 189.82 ± 3.029 mS/cm and an optimum operating pH of 5.966 ± 0.121. The internal resistance of the cells was calculated using Ohm’s Law, resulting in a value of 14.957 ± 0.394 Ω, while the maximum power density was 212.68 ± 26.84 mW/m2 at a current density of 4.506 A/cm2. Through the analysis of the FTIR spectra carried out on the substrate, a decrease in the characteristic organic peaks was observed due to their decomposition during the electricity-generation process. In addition, it was possible to molecularly identify the bacteria Comamonas testosteroni, Sphingobacterium sp., and Stenotropho-monas maltophila adhered to the anodized biofilm. Finally, the capacity of this residue to generate bioelectricity was demonstrated by lighting an LED bulb with a voltage of 2.85 V.

The amount of waste from agriculture has significantly increased in recent decades due to the growing demand for food. Meanwhile, providing electricity to remote areas remains a challenge due to the high installation costs. Single-chamber fuel cells offer a promising solution as they can effectively generate electric power and treat organic waste. For this reason, the main objective of this research is to utilize pickled chili waste as fuel in SC-MFCs (single-chamber fuel cells), using carbon and zinc electrodes to assess its potential as a sustainable alternative fuel source. The fuel cells exhibited a maximum electric current and voltage of 5.565 ± 0.182 mA with 0.963 ± 0.033 V of voltage, respectively, with a substrate electrical conductivity of 113.526 ± 6.154 mS/cm with a pH of 6.62 ± 0.42 on the twelfth day. The internal resistance measured was 46.582 ± 6.845 Ω, and the maximum power density reached 148.128 ± 8.914 mW/cm2 at a current density of 3.657 A/cm2. Additionally, the microorganisms Pseudomonas taiwanensis and Candida parapsilosis were identified with 100% identity in the anode electrode. This study demonstrates that pickled chili residues can successfully generate bioelectricity and light an LED bulb connected to MFCs in series with a voltage of 2.67 V. [ABSTRACT FROM AUTHOR]

Industrialization has brought many environmental problems since its expansion, including heavy metal contamination in water used for agricultural irrigation. This research uses microbial fuel cell technology to generate bioelectricity and remove arsenic, copper, and iron, using contaminated agricultural water as a substrate and Bacillus marisflavi as a biocatalyst. The results obtained for electrical potential and current were 0.798 V and 3.519 mA, respectively, on the sixth day of operation and the pH value was 6.54 with an EC equal to 198.72 mS/cm, with a removal of 99.08, 56.08, and 91.39% of the concentrations of As, Cu, and Fe, respectively, obtained in 72 h. Likewise, total nitrogen concentrations, organic carbon, loss on ignition, dissolved organic carbon, and chemical oxygen demand were reduced by 69.047, 86.922, 85.378, 88.458, and 90.771%, respectively. At the same time, the PDMAX shown was 376.20 ± 15.478 mW/cm2, with a calculated internal resistance of 42.550 ± 12.353 Ω. This technique presents an essential advance in overcoming existing technical barriers because the engineered microbial fuel cells are accessible and scalable. It will generate important value by naturally reducing toxic metals and electrical energy, producing electric currents in a sustainable and affordable way. [ABSTRACT FROM AUTHOR]

Currently, two significant problems involve the government, population, and environment: the accelerated increase in organic waste and the need to replace conventional energy with environmentally sustainable energy. The sustainable use of organic waste is being intensely investigated to generate energy plants that produce alternative sustainable electrical energy beneficial to the population at a low cost. The novelty of this research is given by the use of pepper waste as fuel in the generation of bioelectricity, giving added value to these types of waste, benefiting farmers and companies dedicated to the export and import of these fruits, because they will be able to generate their own electrical energy using their own waste at a lower cost. For this reason, this research uses pepper waste as fuel in single-chamber microbial fuel cells manufactured at a low cost as its primary objective. The maximum values of the electric current (5.118 ± 0.065 mA) and electric potential (1.018 ± 0.101 V) were shown on the fourteenth day, with an optimal operating pH of 7.141 ± 0.134 and electrical conductivity of 112.846 ± 4.888 mS/cm. Likewise, a reduction in the COD was observed from 1210.15 ± 0.89 mg/L to 190.36 ± 16.58 mg/L in the 35 days of monitoring and with a maximum ORP of 426.995 ± 8.615 mV, whose internal resistance was 33.541 ± 2.471 Ω. The peak power density was 154.142 ± 8.151 mW/cm2 at a current density of 4.834 A/cm2, and the Rossellomorea marisflavi strain was identified with 99.57% identity. [ABSTRACT FROM AUTHOR]

The accelerated increase in energy consumption by human activity has generated an increase in the search for new energies that do not pollute the environment, due to this, microbial fuel cells are shown as a promising technology. The objective of this research was to observe the influence on the generation of bioelectricity of sucrose, with different percentages (0%, 5%, 10% and 20%), in papaya waste using microbial fuel cells (MFCs). It was possible to generate voltage and current peaks of 0.955 V and 5.079 mA for the cell with 20% sucrose, which operated at an optimal pH of 4.98 on day fifteen. In the same way, the internal resistance values of all the cells were influenced by the increase in sucrose, showing that the cell without sucrose was 0.1952 ± 0.00214 KΩ and with 20% it was 0.044306 ± 0.0014 KΩ. The maximum power density was 583.09 mW/cm2 at a current density of 407.13 A/cm2 and with a peak voltage of 910.94 mV, while phenolic compounds are the ones with the greatest presence in the FTIR (Fourier transform infrared spectroscopy) absorbance spectrum. We were able to molecularly identify the species Achromobacter xylosoxidans (99.32%), Acinetobacter bereziniae (99.93%) and Stenotrophomonas maltophilia (100%) present in the anode electrode of the MFCs. This research gives a novel use for sucrose to increase the energy values in a microbial fuel cell, improving the existing ones and generating a novel way of generating electricity that is friendly to the environment. [ABSTRACT FROM AUTHOR]

The use of organic waste as fuel for energy generation will reduce the great environmental problems currently caused by the consumption of fossil sources, giving agribusiness companies a profitable way to use their waste. In this research, tomato waste with different percentages of sucrose (0-target, 5, 10, and 20%) was used in microbial fuel cells manufactured on a laboratory scale with zinc and copper electrodes, managing to generate maximum peaks of voltage and a current of 1.08 V and 6.67 mA in the cell with 20% sucrose, in which it was observed that the optimum operating pH was 5.29, while the MFC with 0% (target) sucrose generated 0.91 V and 3.12 A on day 13 with a similar pH, even though all the cells worked in an acidic pH. Likewise, the cell with 20% sucrose had the lowest internal resistance (0.148541 ± 0.012361 KΩ) and the highest power density (224.77 mW/cm2) at a current density of 4.43 mA/cm2, while the MFC with 0% sucrose generated 160.52 mW/cm2 and 4.38 mA/cm2 of power density and current density, respectively, with an internal resistance of 0.34116 ± 0.2914 KΩ. In this sense, the FTIR (Fourier-transform infrared spectroscopy) of all the substrates used showed a high content of phenolic compounds and carboxylate acids. Finally, the MFCs were connected in a series and managed to generate a voltage of 3.43 V, enough to light an LED (green). These results give great hope to companies and society that, in the near future, this technology can be taken to a larger scale. [ABSTRACT FROM AUTHOR]