Search

Secondary control strategies in hybrid ac/dc microgrids have been conventionally designed independently for each side of the microgrid, neglecting the interaction between the ac and dc sides due to the power transferred through the interlinking converter. This has a negative effect on the power sharing and dynamic response of the system. In this article, a novel distributed secondary control strategy for hybrid ac/dc-microgrids is presented which coordinates the control actions of the ac and dc sides. The proposed control scheme simultaneously regulates ac-voltage magnitude and frequency, as well as the dc-voltage magnitude, by including the interlinking converters in the control strategy via a distributed consensus approach. This improves the power-sharing accuracy and secondary control restoration of the variables in both ac and dc sides of the microgrid. Moreover, the proposed methodology avoids the circulating currents which are typically produced in systems with multiple interlinking converters. Several simulation and experimental tests, such as load impacts and plug-and-play capability, are presented to validate the performance of the proposed control strategy using a 24-kW hybrid ac/dc-microgrid laboratory prototype. [ABSTRACT FROM AUTHOR]

This paper presents a novel distributed control strategy for frequency control, congestion management, and optimal dispatch (OD) in isolated microgrids. The proposed strategy drives the distributed generators (DGs) within the microgrid to a dispatch that complies with the Karush–Kuhn–Tucker (KKT) conditions of a linear optimal power flow (OPF) formulation. The controller relies on local power and frequency measurements, information from neighboring DGs, and line-flow measurements transmitted through a communications network. Extensive simulations show a good performance of the controller against sudden changes in the load, congested lines and availability of DGs in the microgrid, and the ability to successfully drive the system to an optimal economic operation. [ABSTRACT FROM AUTHOR]

Battery energy storage systems (BESSs) can be very beneficial to power systems and microgrids for various applications. With increasing sales of electric vehicles (EV), the availability of used electric vehicle batteries (EVBs) is on the rise, which has received significant attention in recent years. The retired EVBs, after repurposing, can serve as an alternative option to new batteries in a BESS. In addition, when a microgrid operator desires to install a BESS, the optimal decisions such as installation year, energy and power size, replacement year, and the number of cycles to failure, that are normally overlooked, have to be determined. Therefore, this paper proposes a comprehensive and novel framework for planning and operation of the BESS based on repurposed EVBs. A novel linearized BESS sizing model is proposed that obtains the BESS optimal decisions regarding design and operation. Various new, modified, and linearized relationships for the BESS have been included in the planning model to ensure that the replacement year of the BESS is optimally determined. Several classes of EVs with multiple drive cycles are clustered and integrated within the proposed framework. [ABSTRACT FROM AUTHOR]

This paper proposes a generalized and efficient power-flow algorithm for islanded hybrid ac/dc microgrids. The algorithm considers the microgrid operational aspects, i.e., absence of a slack bus, unbalanced ac subgrid, droop-controlled ac and dc voltages and ac frequency, and coupling between the ac frequency and dc voltage through interlinking converters. To attain high computational efficiency, the algorithm adopts three features. First, it models the ac subgrid elements in sequence components, thereby dividing the subgrid's set of equations into three smaller sets for faster parallel solution. This approach also accurately represents the different types of ac distributed generators. Second, the algorithm sequentially solves for the power-flow variables of the ac and dc subgrids, thus reducing the number of equations to be solved simultaneously, once again for further computational cost alleviation. Third, the algorithm implements the quadratically convergent Newton–Raphson technique to solve the decoupled sets of equations. The proposed algorithm is validated through comparisons with time-domain simulations, in MATLAB/Simulink, for test hybrid ac/dc microgrids of different configurations. Moreover, three case studies are introduced to examine the proposed algorithm's effectiveness in solving large-scale microgrids, to investigate its limits-enforcement capabilities, and to evaluate its performance as compared to conventional methods. [ABSTRACT FROM AUTHOR]

This paper proposes a generic steady-state modeling and power-flow analysis approach for droop- and isochronously controlled microgrids. The proposed framework adopts symmetrical sequence component models, rather than phase-coordinate models, of microgrid elements. Such approach immensely reduces the power-flow execution time, as it breaks down the system model into independent equation sets with considerably reduced sizes. To render the proposed approach practical and generic, it integrates different types and control schemes of distributed generation (DG), including synchronous generator-based DG (SGDG) and electronically interfaced DG units. Furthermore, it incorporates unbalanced loads and feeders, transformer connections, different load characteristics, and configurations, as well as microgrid droop features. A novel power-flow algorithm based on a modified Newton–Raphson method is proposed to solve for the microgrid steady-state voltage magnitudes, angles, and frequency. The accuracy of the models and algorithm is verified through comparison with detailed time-domain simulations in MATALB/Simulink. Additionally, the proposed approach is shown to outperform the reported Newton-Trust Region approach in generality, accuracy, and performance. Two case studies, incorporating IEEE 123-node test microgrid, are further performed to examine the effectiveness of the proposed approach in solving complicated droop-controlled microgrids, and to examine the behavior of droop-controlled DGs in isochronous microgrids. [ABSTRACT FROM AUTHOR]

This paper presents the mathematical formulation and control architecture of a stochastic-predictive energy management system for isolated microgrids. The proposed strategy addresses uncertainty using a two-stage decision process combined with a receding horizon approach. The first stage decision variables (unit commitment) are determined using a stochastic mixed-integer linear programming formulation, whereas the second stage variables (optimal power flow) are refined using a nonlinear programming formulation. This novel approach was tested on a modified CIGRE test system under different configurations comparing the results with respect to a deterministic approach. The results show the appropriateness of the method to account for uncertainty in the power forecast. [ABSTRACT FROM PUBLISHER]

Access to energy in many of the world?s remote communities is still restricted; these locations only have access to simple and inexpensive local energy sources, such as biomass for cooking and kerosene lamps or candles for lighting. The World Bank and the International Energy Agency (IEA) perceive this energy deficit as a major obstacle to achieving community economic development as well as to obtaining adequate access to health services and clean water. Electricity is a flexible, modern source of energy that is considered to be one of the principal driving forces that stimulate community development and access to basic services in remote locations. Governments, private institutions, and nongovernmental organizations have gradually recognized these energy needs and have established electrification programs at the national and regional levels that aim at the gradual electrification of remote locations. [ABSTRACT FROM PUBLISHER]

The increasing interest in integrating intermittent renewable energy sources into microgrids presents major challenges from the viewpoints of reliable operation and control. In this paper, the major issues and challenges in microgrid control are discussed, and a review of state-of-the-art control strategies and trends is presented; a general overview of the main control principles (e.g., droop control, model predictive control, multi-agent systems) is also included. The paper classifies microgrid control strategies into three levels: primary, secondary, and tertiary, where primary and secondary levels are associated with the operation of the microgrid itself, and tertiary level pertains to the coordinated operation of the microgrid and the host grid. Each control level is discussed in detail in view of the relevant existing technical literature. [ABSTRACT FROM PUBLISHER]

This paper presents the mathematical formulation of the microgrid's energy management problem and its implementation in a centralized Energy Management System (EMS) for isolated microgrids. Using the model predictive control technique, the optimal operation of the microgrid is determined using an extended horizon of evaluation and recourse, which allows a proper dispatch of the energy storage units. The energy management problem is decomposed into Unit Commitment (UC) and Optimal Power Flow (OPF) problems in order to avoid a mixed-integer non-linear formulation. The microgrid is modeled as a three-phase unbalanced system with presence of both dispatchable and non-dispatchable distributed generation. The proposed EMS is tested in an isolated microgrid based on a CIGRE medium-voltage benchmark system. Results justify the need for detailed three-phase models of the microgrid in order to properly account for voltage limits and procure reactive power support. [ABSTRACT FROM PUBLISHER]

The paper investigates renewable energy alternatives to reduce diesel fuel dependency on electricity generation in Ontario's remote northern communities; currently, these communities use diesel fuel as the sole energy source to produce electricity. The current operation is complex, involving several stakeholders, high operating costs, and a considerable CO2 footprint. Several of these communities have electric load restrictions that limit further building construction and economic growth. This preliminary work discusses the barriers for renewable energy (RE) projects in northern Ontario communities by analyzing the current economic structure, the high capital costs, the available natural resources, and the installation and operation complexity. Also, a detailed analysis of six scenarios is presented; three scenarios consider a solar and/or wind-diesel system with a low RE penetration of 7% without any excess energy, whereas other three scenarios increase the RE penetration to 18%, requiring a dump load, an additional small diesel engine, or a battery storage system. The proposed systems reduce fuel consumption, operating costs and CO2 emissions, considering the investment, operation and maintenance costs and constraints in remote regions. [ABSTRACT FROM PUBLISHER]

This paper provides a novel power flow algorithm as a viable tool to accurately analyze the steady-state behavior of islanded hybrid ac/dc microgrids. The operational philosophy of these networks is sophisticated since both the ac frequency and dc voltage are variable, coupled, and sensitive to the control schemes of the distributed generators (DGs) and interlinking converters (ICs). In order to render the analysis generic, mathematical models are developed for control schemes of the DGs and ICs under unbalanced conditions. The presented models are then incorporated into an optimized power flow formulation and the solution is found using the globally convergent Newton-Trust Region (NTR) method. The algorithm accuracy is verified using detailed time-domain simulations in PSCAD/EMTDC environment. The effectiveness of the introduced power flow algorithm is illustrated via two case studies. The first case investigates parallel operation of droop-controlled ICs and highlights the effects of IC settings on load sharing among subgrids and power-transfer sharing through installed ICs. The second case reveals the significance of analyzing the loading condition for each phase of the DGs rather than for the total three-phase power generation, which is commonly followed in steady-state analysis in the reported literature. [ABSTRACT FROM AUTHOR]