1. Effects of ultrasonic melt treatment and solution treatment on the microstructure and mechanical properties of low-density multicomponent Al70Mg10Si10Cu5Zn5 alloy.
- Author
-
Baek, Eun-Ji, Ahn, Tae-Young, Jung, Jae-Gil, Lee, Jung-Moo, Cho, Young-Rae, and Euh, Kwangjun
- Subjects
- *
ALUMINUM alloys , *ULTRASONIC metal-cutting , *MELTING , *METAL microstructure , *MECHANICAL properties of metals - Abstract
The effects of ultrasonic melt treatment (UST) and solution treatment on the microstructure and mechanical properties of a low-density multicomponent Al 70 Mg 10 Si 10 Cu 5 Zn 5 alloy at room and elevated temperatures were investigated. The as-cast Al 70 Mg 10 Si 10 Cu 5 Zn 5 alloy was composed of an fcc Al solid-solution, coarse secondary phases (5–30 μm), fine Cu-containing precipitates (<1 μm), and Zn clusters (<20 nm). The UST significantly reduced the porosity and size of primary Mg 2 Si particles and grains, resulting in an improvement in the strength and ductility of the as-cast alloy at 25 and 350 °C. The solution treatment at 440 °C caused the dissolution of hcp Zn and fine Cu-containing precipitates. It also resulted in the formation of Zn and Cu clusters in the supersaturated Al solid-solution at 25 °C, which led to an improved room-temperature strength. A phase transformation from Mg 2 Si to Q-Al 5 Cu 2 Mg 8 Si 6 occurred during the solution treatment along with the spheroidization of coarse secondary phases and grain growth, which deteriorated the ultimate compressive strengths at 25 and 350 °C and improved the ductility. Unlike the commercial Al alloys, the Al 70 Mg 10 Si 10 Cu 5 Zn 5 alloy showed excellent strengths at temperatures below 200 °C. This is attributed to the combined strengthening by coarse secondary phases, fine precipitates, and clusters. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF