Search

As dental 5 mol% yttria-stabilized (5Y-) zirconia demand high esthetics, it is necessary to clarify how the optical properties are affected by high-speed sintering, which is not yet fully understood. Our study aimed to investigate the effect of high-speed sintering on the translucency and opalescence parameters (TP and OP, respectively), as well as their related microstructure and phase distribution, using two types of multilayered 5Y-zirconia. Multilayered 5Y-zirconia (Cercon xt ML, Lava Esthetic) were cut layer-by-layer, followed by conventional and high-speed sintering. The TP and OP values were subsequently obtained using a spectrophotometer, and field emission scanning electron microscopy images were used to analyze the average grain size. The phase fractions were analyzed using X-ray diffraction. Regardless of the zirconia type, the TP was slightly lowered by high-speed sintering in all the layers except the dentin layer (DL) for Lava Esthetic (p < 0.05). The OP decreased by high-speed sintering in the DL for Cercon xt ML and in all the layers for Lava Esthetic (p < 0.05). The decrease in translucency after high-speed sintering was attributed to a decrease in the yttria-rich t'-phase with low tetragonality, along with an increase in the yttria-lean t-phase with high tetragonality. [ABSTRACT FROM AUTHOR]

The differences in the optical properties of multi-layered zirconia with and without yttria-gradient are not fully understood. This study aimed to evaluate and compare the optical properties, related microstructures, and phase fractions of multi-layered zirconia with and without yttria-gradient. For this, multi-layered zirconia of 5 mol% yttria (5Y) stabilized (Katana STML) and 4Y/5Y stabilized (e.max MT Multi) were cut layerwise, sintered, and analyzed using the opalescence parameter (OP), average transmittance (AT%), translucency parameter (TP), and contrast ratio (CR). The average grain size and phase fractions were obtained from field-emission scanning electron micrographs and X-ray diffraction patterns, respectively. Although the TP values of Katana STML and e.max MT Multi did not show a significant difference (except for transition layer 1), the results of AT and CR showed that the translucency of e.max MT Multi was slightly higher than that of Katana STML (p < 0.05). The opalescence gradient was higher in Katana STML than in the e.max MT Multi. In both zirconia types, translucency increased from the dentin to enamel layer based on the AT, TP, and CR results, while OP decreased (p < 0.05). The higher translucency from the dentin to enamel layer in Katana STML was caused by the pigmentation gradient, while in e.max MT Multi, it was caused by the difference in phase fraction and the pigmentation gradient. [ABSTRACT FROM AUTHOR]

The age-hardening and overaging mechanisms related to the metastable phase formation by the decomposition of Ag and Cu in a dental casting gold alloy composed of 56Au-25Ag-11.8Cu-5Pd-1.7Zn-0.4Pt-0.1Ir (wt.%) were elucidated by characterizing the age-hardening behaviour, phase transformations, changes in microstructure and changes in element distribution. The fast and apparent increase in hardness at the initial stage of the aging process at 400°C was caused by the nucleation and growth of the metastable Ag-Au-rich phase and the Cu-Au-rich phase by the miscibility limit of Ag and Cu. The transformation of the metastable Ag-Au-rich phase into the stable Ag-Aurich phase progressed concurrently with the ordering of the Cu-Au-rich phase into the AuCu I phase through the metastable state, which resulted in the subsequent increase in hardness. The further increase in hardness was restrained before complete decomposition of the parent α0 phase due to the initiation of the lamellar-forming grain boundary reaction. The progress of the lamellar-forming grain boundary reaction was not directly connected with the phase transformation of the metastable phases into the final product phases. The heterogeneous expansion of the lamellar structure from the grain boundary caused greatersoftening than the subsequent further coarsening of the lamellar structure. The lamellar structure was composed of the Ag-Au-rich layer which was Cu-, Pd- and Zn-depleted and the AuCu I layer containing Pd and Zn. [ABSTRACT FROM AUTHOR]