Search

This study aims to explore the inhibitory action of certain derivatives of Schiff's base, namely 4-(pyridin-2-ylimino) pentan-2-one (CE5),4-(pyrimidin-2-ylimino) pentan-2-one (CE4) and 4-((1H-tetrazol-5-yl) imino) pentan-2-one (CE20) against mild steel (MS) corrosion in 1 M HCl by the gravimetric, stationary and transient method. For additional information on the inhibitory properties of the studied compounds, scanning electron microscopy (SEM) and functional density theory (DFT) calculations were also performed. The effectiveness of the Schiff's base derivatives studied follows the order: CE20 > CE4 > CE5. The electrochemical impedance curves show that the corrosion reaction is controlled by a charge transfer process, while the potentiodynamic polarization curves indicate that the synthesized compounds act as a mixed-type inhibitor. The adsorption process follows the Langmuir isotherm. Kinetic, as well as thermodynamic parameters, were calculated and discussed. The increase in EHOMO and decrease in gap energy ΔEgap lead to an increase in the inhibition efficiency. Results obtained from quantum chemical studies are in good agreement with quantum chemical parameters and experimental inhibition efficiencies. [ABSTRACT FROM AUTHOR]

The adsorption and corrosion inhibition behavior of ( E )-2-methyl-N-(thiophen-2-ylmethylidene)aniline ( T ) at steel/1.0 M HCl interface was investigated using gravimetric and electrochemical methods at 308 K. Inhibition efficiency increased with increase in the concentration of new synthesized Tiophene Schiff base. The potentiodynamic polarization studies revealed that this compound as mixed-type inhibitor. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through appropriate equivalent circuit model; a constant phase element (CPE) has been used. The inhibition was assumed to occur via adsorption of the components of the Thiophene derivative on the mild steel surface which can be approximated by Langmuir adsorption isotherm model. Quantum chemical parameters are calculated using the density functional theory (DFT) method. Correlation between theoretical and experimental results is discussed. [ABSTRACT FROM AUTHOR]

The inhibition of mild steel corrosion in 1.0 M HCl by some hydrazine derivatives namely: (1 E ,2 E )-1,2-bis(thiophen-2-ylmethylene)hydrazine ( PP2 ) and (1 E ,2 E )-1,2-bis(1 H -pyrrol-2-ylmethylene)hydrazine ( PP3 ) has been investigated using weight loss, electrochemical studies, SEM and quantum chemical calculations. The results showed that PP3 is the best corrosion inhibitor among the three compounds studied and the inhibition efficiency increases with increase in concentration for all the inhibitors. The adsorption of inhibitor molecules on mild steel surface was found to be spontaneous and obeyed the Langmuir adsorption isotherm. Potentiodynamic polarization investigations indicated that the studied inhibitors were mixed type inhibitors. Electrochemical Impedance Spectroscopic measurements show that the inhibitors form an adsorptive layer on the metallic surface. Some of the inhibitors' quantum chemical parameters are calculated with the DFT method at the B3LYP/6-31G(d,p) level of theory. Among the calculated parameters, the LUMO energy, energy gap between the HOMO and LUMO, dipole moments (μ), global chemical hardness (η), softness (σ), and the fraction of electrons transferred from the inhibitor to the iron surface (ΔN) could well describe the experimental observations. [ABSTRACT FROM AUTHOR]

[Display omitted] • SAP1, SAP2, and SAP3 performance towards the corrosion inhibition for mild steel in 1 M HCl using weight loss, EIS and PP measurements revealed excellent results. • The inhibition efficiency showed a slight decrease with the rise of temperature. • The surface characterization SEM/EDX justified the adsorption of SAP molecules on mild steel surface. • Quantum chemical calculations and Monte Carlo simulation confirmed the experimentally obtained results. Controlling corrosion of metals and their alloys in acidic environments has recently received increasing scientific attention. Therefore, our study investigated three newly synthesized Schiff base (imine) derivatives, namely (3Z,3'Z)-4,4′-(ethane-1,2-diyldiimino)bispent-3-en-2-one (SAP1), (4′E)-4,4′-(pyridine-2,6-diyldinitrilo)dipentan-2-one (SAP2), and (4′E)-4,4′-(benzene-1,3-diyldinitrilo)dipentan-2-one (SAP3) to understand their adsorption on mild steel (MS) surface effects in 1 M HCl solution using electrochemical and theoretical methods. The obtained results show that the three inhibitors have good protective effects. Electrochemical techniques show that the presence of these compounds significantly increases the polarization resistance and influences both the anodic and cathodic reactions. This means that these inhibitors have mixed properties. The stability of these molecules at higher temperatures, from 298 K up to 328 K, was examined by polarization potentiodynamic measurements. This study revealed that these compounds resist temperature by adsorbing on the MS surface to form a protective barrier. Scanning electron microscopy with Energy Dispersive X-ray Analysis (SEM-EDX) was also implemented to understand the adsorption phenomenon. In addition, density functional theory (DFT) and Monte Carlo simulation (MC) were performed to confirm the experimental results. [ABSTRACT FROM AUTHOR]

• Bi-pyrazole derivatives are tested for corrosion protection of mild steel in HCl. • The adsorption of tested compounds follows Langmuir isotherm model. • DFT calculations show a widespread distribution of reactive sites in both molecules. • MD simulations suggest a nearly parallel adsorption of molecules over iron surface. Two new synthesized bi-pyrazole-carbohydrazides, namely 1,1′-(propane-1,3-diyl)bis (5-methyl-1H-pyrazole-3-carbohydrazide) (P2PZ) and 1,1′-(oxy bis (ethane -2,1-diyl)) bis (5-methyl-1H-pyrazole-3- Carbohydrazide) (O2PZ) were evaluated as corrosion inhibitors for mild steel (MS) in 1.0 M HCl media. Comparative study of inhibitory action of P2PZ and O2PZ was conducted first using mass loss and electrochemical measurements (potentiodynamic polarization curves, PPC, and electrochemical impedance spectroscopy, EIS) and it had shown that P2PZ outperforms O2PZ. The electrochemical studies showed a corrosion inhibition efficiency of 95% and 84% at 308 K and 10−3 mol/L of P2PZ and O2PZ, respectively. Their efficiency augmented with augmentation of concentration and decreased with augmentation of temperature. Electrochemical impedance spectroscopy showed that the corrosion inhibition followed a charge transfer process. Polarization curves suggested that the P2PZ and O2PZ acted as mixed-type inhibitors and followed the Langmuir adsorption isotherm. The free energy of adsorption (ΔG ads) values, which lie within the range of -39.94 to -37.36 KJ mol−1, confirmed a physicochemical adsorption process. Scanning electron microscope (SEM) images indicated the formation of a protective layer on the surface of the metal in the presence of both inhibitors. Density Functional Theory (DFT) and molecular dynamics (MD) simulation have been introduced to carry out a theoretical investigation of the inhibitors' reactivity and interaction with the iron surface, respectively. The comparative study based on experimental and theoretical results showed that the trend of inhibition potentials of tested inhibitors depends on their electron-donating/accepting abilities. The trend of reactivity of molecules P2PZ and O2PZ matched well with experimental results. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Corrosion inhibition of mild steel in acid medium by L1 and C1 was investigated. • Inhibition efficiencies were experimentally achieved by gravimetric and electrochemical techniques and especially for the compound C 1. • SEM-EDS and UV–Visible studies support the formation of inhibitor film on steel surface. • DFT and Monte Carlo methods allowed correlating molecular properties with inhibition efficiency. The inhibition ability of a bipyrazole compound (L 1) and its complex copper [Cu (Hbpz) 3 ] (BF 4) 2 ] (C 1) towards mild steel (MS) corrosion in HCl solution was studied at various concentrations and temperatures using weight loss (WL) potentiodynamic polarization curves (PPC), electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDS) methods, UV–vis spectroscopy and computational approach. Results of the polarization revealed that these compounds are mixed type. The adsorption of both molecules on the MS surface is demonstrated by the EDS, SEM and UV–visible findings. Adsorption of both compounds was found to obey Langmuir adsorption isotherm. Density functional theory (DFT) and Monte Carlo Simulation (MC)) supports the experimental results. [ABSTRACT FROM AUTHOR]

• Studied corrosion inhibitors, M2PyAz and B2PyAz act as efficient inhibitors for MS. • Tafel results revealed that M2PyAz and B2PyAz as a mixed-type inhibitor. • Adsorption of both inhibitors obeyed Langmuir isotherm. • Theoretical calculations results were correlated to the inhibition efficiency. New bi-Pyrazol-Carbohydrazides, N,N-bis (3-Carbohydrazide-5-methylpyrazol-1-yl) methylene ( M2PyAz ) and 1,4-bis (3-Carbohydrazide-5-methylpyrazol-1-yl) butane (B2PyAz), were synthesized and their inhibitor effect against mild steel (MS) corrosion in 1 M HCl solution has been evaluated. Comparative study of inhibitory action of M2PyAz and B2PyAz was conducted first using weight loss measurements (WL), potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and theoretical computational methods. The inhibition efficiencies of M2PyAz and B2PyAz can reach 98.6% and 87.8% respectively when the optimal concentration is 10–3 M. This result indicates that M2PyAz behave as excellent corrosion inhibitor towards MS because of its molecular size giving a denticity of electron donor atoms. EIS results indicate that the charge transfer resistance increases with augmentation concentration for both inhibitors and the MS corrosion in this system is controlled by a charge transfer process. PDP curves suggest that the M2PyAz and B2PyAz act as mixed type corrosion inhibitors. Free energy of adsorption obtained from the Langmuir isotherm model for both M2PyAz and B2PyAz implies that both molecules inhibit the acid attack mainly by chemisorption. WL-measurements were carried out in temperature range of 308–348 K, illustrating approximately 98.5% and 89% inhibitory efficiency respectively for M2PyAz and B2PyAz after 6 h immersion at 308 K in 1 M HCl solution. SEM images indicates the protective layer growth on the surface of metal in the presence of both inhibitors. SEM images analysis in the presence of both inhibitors confirmed the electrochemical outcomes. Density functional theory (DFT) method and molecular dynamics simulations (MDs) application suggest that M2PyAz and B2PyAz can show excellent corrosion inhibition character. The trend of reactivity of both molecules M2PyAz and B2PyAz is in agreement with experimental study. [ABSTRACT FROM AUTHOR]