Search

This paper investigates nonlinear transceiver design for full-duplex multiple-input multiple-output (FD-MIMO) relay systems. A dual-hop amplify-and-forward relaying protocol is considered. At the destination, nonlinear successive-interference-cancellation (SIC) is used for signal detection. The goal is to find the source and relay precoders such that the symbol-vector error rate (SVER) can be minimized. Due to the loop interference (LI), optimizing the relay precoder in FD systems is much more involved. In this paper, we propose novel designs to solve this problem. Starting from the QR-SIC receiver, we theoretically show that the relay precoder can be solved with a closed-form expression even when the system incurs LI. Then, we consider the system with a minimum mean-squared-error SIC receiver, where the relay precoder design entails a different problem formulation and introduces new challenges. We propose a novel iterative method, with closed-form solutions in each iteration, to solve this problem. Simulations show that our designs can significantly improve the SVER performance for FD-MIMO relay systems. [ABSTRACT FROM AUTHOR]

Full-duplex (FD) multiple-input multiple-output relaying has been considered an effective scheme to increase the spectral efficiency for wireless communications. As known, the main problem for the FD system is the cancellation of loop interference (LI). In this paper, we propose using the joint source/relay precoding to reduce the influence of LI. Therein, linear precoders are used at the source and relay, while the minimum mean-squared-error receiver is adopted at the destination. The joint precoder design is complicated when spatial multiplexing is exploited for signal transmission. To solve the problem, we propose an iterative method in which the original problem is split into two subproblems. With some matrix properties, we then show that each subproblem can be formulated as a convex optimization. Finally, a closed-form solution can be obtained with the Karush–Kuhn–Tucker conditions. Using a mean-squared-error upper bound, we also propose a low-complexity method to reduce the computational complexity. The proposed precoders have closed-form expressions, which is a great advantage in real-world implementation. Simulation results show that the proposed methods significantly outperform existing ones. [ABSTRACT FROM AUTHOR]

Joint source/relay precoding has been considered an effective method to improve the system performance of dual-hop amplify-and-forward (AF) multiple-input–multiple-output (MIMO) relay systems. For practical implementations, the codebook-based limited-feedback precoding is widely exploited since the feedback bits can be effectively limited. As known, system performance strongly depends on the codeword selection criterion. In this paper, we will explore how to design the selection criterion when successive interference cancellation (SIC) receivers are adopted at the destination. Starting from the QR-SIC receiver, we first propose a centralized selection scheme by maximizing the minimum postprocessing signal-to-noise ratio (SNR). Next, a decentralized selection scheme is further developed to reduce the computational complexity. Furthermore, we demonstrate that our methods can be directly extended to the system with the minimum mean square error (MMSE)-SIC receiver. Simulation results show that the proposed designs can significantly improve system performance. [ABSTRACT FROM PUBLISHER]

Tomlinson–Harashima precoded (THP) multiple-input–multiple-output (MIMO) systems are developed to cancel the intersymbol interference (ISI) at the transmitter. However, the THP at least requires perfect channel direction information (CDI) to completely mitigate the interference at the transmitter, which is not practical in the real world. The limited feedback systems are then practically developed to convey the quantized CDI to the transmitter. Using the quantized CDI to conduct the THP, an unavoidable interference degrades the performance at the receiver. In this paper, we investigate the performance degradation resulted from the random vector quantization (RVQ), which is a kind of CDI-based limited feedback mechanism. Here, we measure the performance degradation as the excess mean-squared error (EMSE). Since the formulation of the EMSE is a complicated function of the quantization error, we proposed using the second-order Taylor expansion to derive an analytical result. Simulation results have also verified our proposed analysis, showing that the derived analysis can match the actual EMSE. [ABSTRACT FROM PUBLISHER]

In this paper, we study the codebook size design strategies in the multiple-input–multiple-output (MIMO) broadcast channel (BC) systems. We adopt the nonlinear Tomlinson–Harashima precoder (THP), which is designed by the imperfect channel direction information (CDI) acquired from the random vector quantization (RVQ) feedback mechanism. Under the limitation of the total feedback rate, we flexibly allocate the size of each user's codebook so that the overall channel capacity is maximized. Since the design problem is not convex, directly finding out the optimum allocation of codebook size is not attainable. However, by sophisticatedly using the discrete majorization theory, we can derive the codebook size allocation strategies for the high- and the low-signal-to-noise-ratio (SNR) regions. Interestingly, the results show that the equal size codebook is preferable in the low-SNR region, whereas the codebook allocates the whole available codebook size to a single user in the high-SNR region. Simulations certify the theoretical result of our design. [ABSTRACT FROM PUBLISHER]

We consider joint source/relay precoding in three-node two-hop amplify-and-forward (AF) multiple-input–multiple-output (MIMO) relay systems. In our systems, linear precoders are used at the source and the relay, and the QR successive interference cancelation (SIC) receiver is used at the destination. Our design criterion is to minimize the block error rate (BLER) of the receiver. Since the BLER is a complicated function of the source and relay precoders, and the power constraints are coupled, the optimization problem is difficult to solve. To overcome the difficulty, we first apply the primal decomposition approach, transforming the original optimization to a subproblem and a master problem. In the subproblem, the optimum source precoder can be obtained with the geometric mean decomposition (GMD). In the master problem, however, the optimum relay precoder cannot be straightforwardly obtained. We theoretically prove that the optimum relay precoder exhibits a matrix diagonalization property. Using this property, we can then transform the master problem into a scalar-variable concave optimization problem. A closed-form solution can be derived by the Karuch–Kuhn–Tucker (KKT) conditions. Finally, we extend our method to the two-hop AF MIMO relay system with the minimum mean square error (MMSE) SIC receiver. Assuming a unitary source precoder, we obtain the optimum source and relay precoders in closed form. Simulations show that the proposed transceivers can significantly improve the system performance. [ABSTRACT FROM PUBLISHER]

In this letter, we propose a robust design for a two-stage Tomlinson- Harashima precoder (THP) multiple-input multiple-output (MIMO) system, where the THP cascaded with a unitary precoder is deployed at the transmitter and a linear minimum mean-square error decoder is adopted at the receiver. With the random vector quantization (RVQ) feedback scheme, only the channel direction information (CDI) is quantized and fed back to the transmitter. Applying the THP directly at the transmitter will cause unavoidable interference at the destination due to the quantization error. We herein design a robust THP with the minimum mean-squared error (MMSE) criterion by taking the quantization error into account to mitigate the effect of the quantization error. Simulation results show that the proposed robust THP scheme provides the better performance compared to the non-robust one. [ABSTRACT FROM PUBLISHER]

Existing transceiver designs in amplify-and-forward (AF) multiple-input-multiple-output (MIMO) relay systems often assume the availability of perfect channel state informations (CSIs). Robust designs for imperfect CSI have less been considered. In this paper, we propose a robust nonlinear transceiver design for the system with a Tomlinson-Harashima precoder (THP), a linear relay precoder, and a minimum-mean-squared-error (MMSE) receiver. Since two precoders and imperfect CSIs are involved, the robust transceiver design is difficult. To overcome the difficulty, we first propose cascading an additional unitary precoder after the THP. The unitary precoder can not only simplify the optimization but also improve the performance of the MMSE receiver. We then adopt the primal decomposition dividing the original optimization problem into a subproblem and a master problem. With our formulation, the subproblem can be solved and the two-precoder problem can be transferred to a single relay precoder problem. The master problem, however, is not solvable. We then propose a lower bound for the objective function and transfer the master problem into a convex optimization problem. A closed-form solution can then be obtained by the Karush-Kuhn-Tucker (KKT) conditions. Simulations show that the proposed transceiver can significantly outperform existing linear transceivers with perfect or imperfect CSIs. [ABSTRACT FROM PUBLISHER]