Search

Clay is used as a raw material for the production of lightweight aggregates because it is readily processed into suitable granules and forms low-density but high strength aggregate particles when sintered at relatively low temperatures. The use of waste clay generated by major infrastructure development projects to make lightweight aggregate has a positive environmental impact and contributes towards a more circular economy. This paper reviews the manufacturing process used to produce lightweight aggregates from clay and the influence of processing conditions on properties. It also reviews secondary materials that have been incorporated into clays to produce lightweight aggregates. Additional research is required to improve understanding of the effects of composition and production parameters on the pore structure, density, water adsorption and strength of clay derived lightweight aggregates. [ABSTRACT FROM AUTHOR]

This study looked at the potential of bauxite residue or red mud to be used in the manufacture of lightweight aggregate in replacement of pulverised fuel ash (PFA), commonly used as a way of recycling problematic wastes. The percentage replacements of red mud with PFA were as follows: 25, 31, 38, 44 and 50%. These were blended in a mix with waste excavated clay and sewage sludge – all from the Chongqing municipality in China. Lightweight pellets were produced using a Trefoil rotary kiln and were sintered to 1200 °C. Results showed that 44% bauxite residue replacement produced lightweight pellets with the highest compressive strength, highest density and largest water holding capacity. This would be expected in materials with a low level of silicates, which causes insufficient glass phase viscosity and therefore poor bloating during firing; producing an aggregate with a higher density but with open pores that allowed for larger water absorption. All ratios of red mud aggregates were significantly reduced in pH after firing to around pH 8, and this reduced the leachability of the aggregates to levels below those set by the European landfill directive (2003/33/EC). [ABSTRACT FROM AUTHOR]