Search

The Odiel River Basin (SW Spain) drains the central part of the Iberian Pyrite Belt (IPB), a world-class example of sulfide mining district and concomitantly of acid mine drainage (AMD) pollution. The severe AMD pollution and the incipient state of remediation strategies implemented in this region, coupled with the proximity of the deadline for compliance with the European Water Framework Directive (WFD), urge to develop a restoration and water resources management strategy. Furthermore, despite the presence of some reservoirs with acid waters in the Odiel basin, the construction of the Alcolea water reservoir has already started. On the basis of the positive results obtained after more than 10 years of developing a specific passive remediation technology (dispersed alkaline substrate (DAS)) for the highly polluted AMD of this region, a restoration strategy is proposed. The implementation of 13 DAS treatment plants in selected acid discharges along the Odiel and Oraque sub-basins and other restoration measurements of two acidic creeks is proposed as essential to obtain a good water quality in the future Alcolea reservoir. This restoration strategy is also suggested as an economically and environmentally sustainable approach to the extreme metal pollution affecting the waters of the region and could be considered the starting point for the future compliance with the WFD in the Odiel River Basin.

Water resources management and restoration strategies, and subsequently ecological and human life quality, are highly influenced by the presence of short and long term cycles affecting the intensity of a targeted pollution. On this respect, a typical acid mine drainage (AMD) groundwater from a sulfide mining district with dry Mediterranean climate (Iberian Pyrite Belt, SW Spain) was studied to unravel the effect of long term weather changes in water flow rate and metal pollutants concentration. Three well differentiated polluting stages were observed and the specific geochemical, mineralogical and hydrological processes involved (pyrite and enclosing rocks dissolution, evaporitic salts precipitation-redisolution and pluviometric long term fluctuations) were discussed. Evidencing the importance of including longer background monitoring stage in AMD management and restoration strategies, the present study strongly advise a minimum 5-years period of AMD continuous monitoring previous to the design of any AMD remediation system in regions with dry Mediterranean climate., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The Iberian Pyrite Belt (IPB), SW Spain and Portugal, contains about 100 abandoned mine wastes and galleries that release acid mine drainages (AMD) to the Tinto and Odiel rivers. In situ passive remediation technologies are especially suitable to remediate the drainages of these orphan sites. However, traditional remediation systems, designed for coal mines, have been demonstrated inefficient to treat the IPB mine waters. Due to their high acidity and metal loads, large amount of solids precipitate and fast clogging of porosity or passivation (coating) of the reactive grains occurs. To overcome these problems, the dispersed alkaline substrate (DAS) a mixture of fine-grained limestone sand and a coarse inert matrix (e.g., wood shavings) was developed. The small grains provide a large reactive surface and dissolve almost completely before the growing layer of precipitates passivates the substrate. The high porosity retards clogging. However, calcite dissolution only raises pH to values around 6.5, at which the hydroxides of trivalent metals (Al and Fe) precipitate, but it is not high enough to remove divalent metals. Caustic magnesia (MgO) buffers the solution pH between 8.5 and 10. A DAS system replacing limestone with caustic magnesia has been tested to be very efficient to remove divalent metals (Zn, Cd, Mn, Cu, Co, Ni, and Pb) from the water previously treated with calcite.

Complete metal removal from highly-polluted acid mine drainage was attained by the use of a pilot multi-step passive remediation system. The remediation strategy employed can conceptually be subdivided into a first section where the complete trivalent metal removal was achieved by the employment of a previously tested limestone-based passive remediation technology followed by the use of a novel reactive substrate (caustic magnesia powder dispersed in a wood shavings matrix) obtaining a total divalent metal precipitation. This MgO-step was capable to abate high concentrations of Zn together with Mn, Cd, Co and Ni below the recommended limits for drinking waters. A reactive transport model anticipates that 1 m(3) of MgO-DAS (1 m thick × 1 m(2) section) would be able to treat a flow of 0.5 L/min of a highly acidic water (total acidity of 788 mg/L CaCO(3)) for more than 3 years., (Copyright © 2012 Elsevier B.V. All rights reserved.)

As acid mine drainage (AMD) remediation is increasingly faced by governments and mining industries worldwide, the generation of metal-rich solid residues from the treatments plants is concomitantly raising. A proper environmental management of these metal-rich wastes requires a detailed characterization of the metal mobility as well as an assessment of this new residues stability. The European standard leaching test EN 12457-2, the US EPA TCLP test and the BCR sequential extraction procedure were selected to address the environmental assessment of dispersed alkaline substrate (DAS) residues generated in AMD passive treatment systems. Significant discrepancies were observed in the hazardousness classification of the residues according to the TCLP or EN 12457-2 test. Furthermore, the absence of some important metals (like Fe or Al) in the regulatory limits employed in both leaching tests severely restricts their applicability for metal-rich wastes. The results obtained in the BCR sequential extraction suggest an important influence of the landfill environmental conditions on the metals released from the wastes. To ensure a complete stability of the pollutants in the studied DAS-wastes the contact with water or any other leaching solutions must be avoided and a dry environment needs to be provided in the landfill disposal selected., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Acid mine drainage (AMD) from the Iberian Pyrite Belt has high acidity and metal concentrations. Earlier pilot experiments, based on limestone sand dispersed in wood shavings (dispersed alkaline substrate; DAS) have been shown to be an efficient treatment option. However, complete metal removal was not achieved, principally due to the high ferrous iron concentration in the inflow AMD. In order to oxidize and remove iron, a natural Fe-oxidizing lagoon (NFOL) was added prior to treatment with limestone-DAS. The NFOL comprises several pre-existing Fe-stromatolite terraces and cascades, and a lagoon with a volume of 100 m(3) built near the mine shaft. Downstream of the NFOL, the limestone-DAS treatment consists of two reactive tanks of 3 m(3) each filled with limestone-DAS reactive substrate, connected in series with two decantation ponds of 6 m(3) each and several oxidation cascades. The AMD emerging from the mine shaft displayed a pH near 3, a net acidity of 1800 mg/L as CaCO(3) equivalents, and mean concentrations of 440 mg/L Zn; 275 mg/L Fe (99% Fe(II)); 3600 mg/L SO(4); 250 mg/L Ca; 100 mg/L Al; 15 mg/L Mn; 5 mg/L Cu; and 0.1-1 mg/L As, Pb, Cr, Cd, Co, and Ni. The oxidation induced in the NFOL enhanced ferric iron concentration, showing an average of 65% oxidation and 38% retention during the monitoring period. The whole system removed a mean of 1350 mg/L net acidity as CaCO(3) equivalents (71% of inflow); corresponding to 100% of Fe, Al, Cu, Pb and As, and 6% of Zn., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Several experiments were conducted to evaluate zinc-tolerance of sulfate-reducing bacteria (SRB) obtained from three environmental samples, two inocula from sulfide-mining districts and another inoculum from a wastewater treatment plant. The populations of SRB resisted zinc concentrations of 260 mg/L for 42 days in a sulfate-rich medium. During the experiments, sulfate was reduced to sulfide and concentrations in solution decreased. Zinc concentrations also decreased from 260 mg/L to values below detection limit. Both decreases were consistent with the precipitation of newly-formed sphalerite and wurtzite, two polymorphs of ZnS, forming <2.5-μm-diameter spherical aggregates identified by microscopy and synchrotron-μ-XRD. Sulfate and zinc are present in high concentrations in acid mine drainage (AMD) even after passive treatments based on limestone dissolution. The implementation of a SRB-based zinc removal step in these systems could completely reduce the mobility of all metals, which would improve the quality of stream sediments, water and soils in AMD-affected landscapes., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Metal contamination from acid mine drainage (AMD) is a serious problem in the southwest of the Iberian Peninsula, where the Iberian Pyrite Belt is located. This zone contains original sulfide reserves of about 1700Mt distributed among more than 50 massive sulfide deposits. Weathering of these minerals releases to the waters significant quantities of toxic elements, which severely affect the sediments and surface waters of the region. The main goal of this paper is to evaluate the toxicity and the potential risk associated with the mining areas using Microtox test and different factors which assess the degree of contamination of the sediments and waters. For this, a natural stream polluted by AMD-discharge from an abandoned mine has been studied. The results show that elevated concentrations of Cu, As and Zn involve an important potential risk on the aquatic environment, associated both with sediments and waters. Microtox test informs that the sediments are extremely or very toxic, mainly related to concentrations of Fe, As, Cr, Al, Cd, Cu and Zn. Pollution is mainly transferred to the sediments increasing their potential toxicity. A natural creek affected by AMD can store a huge amount of pollution in its sediments while exhibiting a not very low water pH and low water metal concentration., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Synchrotron radiation-induced micro-X-ray analysis were applied to characterize the newly formed phases that precipitate in a passive treatment system using magnesium oxide to remove high concentrations of zinc (ca. 440 mg/L) and other minor metals from neutral pretreated waters in the Iberian Pyrite Belt (SW Iberian Peninsula). Micro-X-ray fluorescence (μ-XRF) maps of polished samples were used to find spatial correlations among metals, pinpointing zones of interest where micro-X-ray diffraction (μ-XRD) data were exploited to identify the mineral phases responsible for metal retention. This coupled technique identified hydrozincite (Zn(5)(CO(3))(2)(OH)(6)) and minor loseyite ((Mn,Zn)(7)(CO(3))(2)(OH)(10)) as the mineral sinks for Zn and also other potentially toxic elements such as Co and Ni. Although hydrozincite retains traces of Mn, this metal is mainly retained by precipitation of loseyite. The precipitation of zinc hydroxy-carbonates and their ability to uptake other metals (Mn, Co, and Ni) is hence of potential interest not only for the treatment of contaminated waters but also for the generation of a solid waste that could be exploited as a new Zn economic resource.