Search

The densified MnZn ferrite ceramics were prepared using the cold sintering process under pressure, with an acetate ethanol solution used as the transient solvent. The effects of the transient solvent, the pressure and annealing temperature on the density, and the micromorphology and magnetic properties of the sintered MnZn ferrites were studied. The densified MnZn ferrite was obtained using the cold sintering process and its relative density reached up to 85.4%. The transient solvent and high pressure are essential to the cold sintering process for MnZn ferrite. The annealing treatment is indispensable in obtaining the sample with the higher density. The relative density was further increased to 97.2% for the sample annealed at 950 °C for 6 h. The increase in the annealing temperature reduces the power loss at high frequencies. [ABSTRACT FROM AUTHOR]

In this study, MnZn ferrites with added YIG nanoparticles were developed for MHz frequency applications. The effect of the magnetic YIG additive on the power loss, initial permeability, and cutoff frequency of MnZn ferrites was investigated. A small quantity of added YIG effectively reduces the power loss and concurrently increases the initial permeability. Compared to the results for the MnZn ferrite with no added YIG, the optimal MnZn ferrite with 600 ppm added YIG exhibits a reduction in the power loss at 25°C of 56.4% and 36.6% at 1 MHz/50 mT and 3 MHz/10 mT, respectively, and a 13.9% increase in the initial permeability. This sample also exhibits a good stability of the power loss against temperature. The power loss remains below 205 kW/m3 over temperatures ranging from 25 to 140°C. The effect mechanism of YIG addition on the magnetic properties of MnZn ferrites was studied. An analysis based on the equivalent circuit model showed that the reduction in the eddy current loss and power loss mainly results from the increase in the grain boundary resistance caused by the addition of highly resistive YIG. [ABSTRACT FROM AUTHOR]

To meet the challenge of varied working temperatures of inductance components in new energy vehicle and 5G communication, the high- T C high-permeability MnZn ferrite with excellent temperature stability was developed by the addition of SnO 2. In this series of samples, initial permeability μ i maintains large values in a wide temperature range. With increasing the SnO 2 content, the temperature of the second permeability peak T sp decreases and meanwhile Curie temperature T C maintains as high as 160 °C. For the best sample with 6000 ppm SnO 2 , μ i at 25 °C is 7244 and exhibits the excellent temperature stability with the low specific temperature coefficient of 0.35 × 10−6 °C−1 between 25 and 130 °C. The addition of SnO 2 generates Fe2+ and adjusts the magneto-crystalline anisotropy constant K 1 = 0 point, which is responsible for the wide-temperature high permeability. The effect of SnO 2 addition on magnetization process has also been clarified. [ABSTRACT FROM AUTHOR]