Search

Natural gas is typically transported for long distances through high pressure pipelines. Such pressure must be reduced before the gas distribution to users. The natural gas lamination process, traditionally adopted for this scope, may determine hydrate formation which may damagingly affect the system operation. Therefore, in order to avoid such circumstance, a suitable gas preheating is required. On the other hand, the available pressure drop can be recovered through a turbo-expansion system in order to provide mechanical energy to drive electricity generators. In this case a higher gas preheating is necessary. This paper presents a detailed simulation model capable to accurately analyse this process as well as the traditional decompression one. Such new model, implemented in a computer tool written in MATLAB, allows one to dynamically assess the energy, economic and environmental performance of these systems, by also taking into account hourly energy prices and weather conditions. Two turbo-expansion system layouts are modelled and simulated. In particular, the gas preheating is obtained by considering two different scenarios: gas-fired heater or solar thermal collectors. Another novelty of the presented dynamic simulation tool is the capability to take into account the time fluctuations of electricity feed-in and purchase tariffs. Finally, a suitable case study relative to a gas decompression station located in South Italy is also presented. Here, a remarkable primary energy savings and avoided CO2 emissions can be obtained through the examined turbo-expansion systems vs. traditional decompression ones. Results show that the economic profitability of the investigated novel technology depends on the available gas pressure drops and flow rates and on the produced electricity use. [ABSTRACT FROM AUTHOR]

This paper presents a novel dynamic simulation model for the analysis of a hybrid turboexpander system coupled with innovative high-vacuum solar thermal collectors. The model is developed in MatLab and it is able to dynamically calculate the energy, exergy, environmental, and economic performances of the investigated system, by taking into account the hourly fluctuation of thermodynamic and economic parameters (e.g. electricity cost, natural gas temperature, and flow rates, etc.). In addition, a computer-based Design of Experiment (DoE) approach was implemented for achieving the optimal design of the proposed system. A suitable case study is presented in order to show the capabilities of the developed simulation tool. Conventional and non-conventional decompression systems located in the weather zone of Messina (South-Italy) are investigated with the aim of assessing the optimal system configuration. By means of the computer-based DoE analysis, the optimal values of several design parameters (such as the number of solar thermal collectors, the volume of the hot water storage tank, and the size of the water loop pump) are calculated. Numerical results show significant primary energy savings (1.36 TWh/year) and avoided carbon dioxide emissions (348 t CO2 /year). From the economic point of view, a feasible simple pay-back period of 4.51 years is achieved. The destroyed exergy of the system components are calculated, obtaining the highest value for the turbo-expander, equal to 12.0 TWh/year. • Dynamic modelling and simulation of natural gas turbo-expander system. • Energy, exergy and economic analysis of the turbo-expander system coupled to solar thermal collector field. • DoE analysis for the optimization of the solar field. • Analysis of a case study of pressure reduction station. • Confirmed system feasibility by achieved energy, economic and environmental results. [ABSTRACT FROM AUTHOR]