Search

We present a comprehensive experimental rheological dataset for purified entangled ring polystyrenes and their blends with linear chains in nonlinear shear and elongation. In particular, data for the shear stress growth coefficient, steady-state shear viscosity, and first and second normal stress differences are obtained and discussed as functions of the shear rate, as well as molecular parameters (molar mass, blend composition, and decreasing molar mass of linear component in the blend). Over the extended parameter range investigated, rings do not exhibit clear transient undershoot in shear, in contrast to their linear counterparts and ring-linear blends. For the latter, the size of the undershoot and respective strain appear to increase with the shear rate. The universal scaling of the strain at overshoot and fractional overshoot (the ratio of the maximum to the steady-state shear stress growth coefficient) indicates subtle differences in the shear-rate dependence between rings and linear polymers or their blends. The shear thinning behavior of pure rings yields a slope nearly identical to predictions (−4/7) of a recent shear slit model and molecular dynamics simulations. Data for the second normal stress difference are reported for rings and ring-linear blends. While N2 is negative and its absolute value stays below that of N1, as for linear polymers, the ratio –N2/N1 is unambiguously larger for rings compared to linear polymer solutions with the same number of entanglements (almost by a factor of 2), in agreement with recent nonequilibrium molecular dynamics simulations. Furthermore, –N2 exhibits slightly weaker shear rate dependence compared to N1 at high rates, and the respective power-law exponents can be rationalized in view of the slit model (3/7) and simulations (0.6), although further work is needed to unravel the molecular original of the observed behavior. The comparison of shear and elongational stress growth coefficients for blends reflects the effect of ring-linear threading, which leads to significant viscosity enhancement in elongation. Along the same lines, the elongational stress is much larger than the first normal stress in shear, and their ratio is much larger for rings and ring-linear blends compared to linear polymers. This confirms the interlocking scenario of rings and their important role in mechanically reinforcing linear matrices. [ABSTRACT FROM AUTHOR]

A scaling model of self-similar conformations and dynamics of nonconcatenated entangled ring polymers is developed. Topological constraints force these ring polymers into compact conformations with fractal dimension df = 3 that we call fractal loopy globules (FLGs). This result is based on the conjecture that the overlap parameter of subsections of rings on all length scales is the same and equal to the Kavassalis-Noolandi number OKN 10-20. The dynamics of entangled rings is self-similar and proceeds as loops of increasing sizes are rearranged progressively at their respective diffusion times. The topological constraints associated with smaller rearranged loops affect the dynamics of larger loops through increasing the effective friction coefficient but have no influence on the entanglement tubes confining larger loops. As a result, the tube diameter defined as the average spacing between relevant topological constraints increases with time t, leading to "tube dilation". Analysis of the primitive paths in molecular dynamics simulations suggests a complete tube dilation with the tube diameter on the order of the time-dependent characteristic loop size. A characteristic loop at time t is defined as a ring section that has diffused a distance equal to its size during time t. We derive dynamic scaling exponents in terms of fractal dimensions of an entangled ring and the underlying primitive path and a parameter characterizing the extent of tube dilation. The results reproduce the predictions of different dynamic models of a single nonconcatenated entangled ring. We demonstrate that traditional generalization of single-ring models to multi-ring dynamics is not self-consistent and develop a FLG model with self-consistent multi-ring dynamics and complete tube dilation. This self-consistent FLG model predicts that the longest relaxation time of nonconcatenated entangled ring polymers scales with their degree of polymerization N as trelax ~ N7/3, while the diffusion coefficient of these rings scales as D3d ~ N-5/3. For the entangled solutions and melts of rings, we predict power law stress relaxation function G(t) ~ t-3/7 at t < trelax without a rubbery plateau and the corresponding viscosity scaling with the degree of polymerization N as η ~ N4/3. These theoretical predictions are in good agreement with recent computer simulations and are consistent with experiments of melts of nonconcatenated entangled rings. [ABSTRACT FROM AUTHOR]

We use molecular dynamics simulationsof the Kremer–Grest(KG) bead–spring model of polymer chains of length between10 and 500, and a closely related analogue that allows for chain crossing,to clearly delineate the effects of entanglements on the length-scale-dependentchain relaxation in polymer melts. We analyze the resulting trajectoriesusing the Rouse modes of the chains and find that entanglements stronglyaffect these modes. The relaxation rates of the chains show two limitingeffective monomeric frictions, with the local modes experiencing muchlower effective friction than the longer modes. The monomeric relaxationrates of longer modes vary approximately inversely with chain lengthdue to kinetic confinement effects. The time-dependent relaxationof Rouse modes has a stretched exponential character with a minimumof stretching exponent in the vicinity of the entanglement chain length.None of these trends are found in models that allow for chain crossing.These facts, in combination, argue for the confined motion of chainsfor time scales between the entanglement time and their ultimate freediffusion. [ABSTRACT FROM AUTHOR]

Molecular dynamics simulations confirm recent extensional flow experiments showing ring polymer melts exhibit strong extension-rate thickening of the viscosity at Weissenberg numbers Wi≪1. Thickening coincides with the extreme elongation of a minority population of rings that grows with Wi. The large susceptibility of some rings to extend is due to a flow-driven formation of topological links that connect multiple rings into supramolecular chains. Links form spontaneously with a longer delay at lower Wi and are pulled tight and stabilized by the flow. Once linked, these composite objects experience larger drag forces than individual rings, driving their strong elongation. The fraction of linked rings depends nonmonotonically on Wi, increasing to a maximum when Wi∼1 before rapidly decreasing when the strain rate approaches 1/τe. [ABSTRACT FROM AUTHOR]

We use molecular simulations to probe the local viscoelasticity of an entangled polymer melt by tracking the motion of embedded nonsticky nanoparticles (NPs). As in conventional microrheology, the generalized Stokes-Einstein relation is employed to extract an effective stress relaxation function GGSE(t) from the mean square displacement of NPs. GGSE(t) for different NP diameters d are compared with the stress relaxation function G(t) of a pure polymer melt. The deviation of GGSE(t) from G(t) reflects the incomplete coupling between NPs and the dynamic modes of the melt. For linear polymers, a plateau in GGSE(t) emerges as d exceeds the entanglement mesh size a and approaches the entanglement plateau in G(t) for a pure melt with increasing d. For ring polymers, as d increases towards the spanning size R of ring polymers, GGSE(t) approaches G(t) of the ring melt with no entanglement plateau. [ABSTRACT FROM AUTHOR]

The motion of nanoparticles (NPs) in entangled melts of linear polymers and nonconcatenated ring polymers are compared by large-scale molecular dynamics simulations. The comparison provides a paradigm for the effects of polymer architecture on the dynamical coupling between NPs and polymers in nanocomposites. Strongly suppressed motion of NPs with diameter d larger than the entanglement spacing a is observed in a melt of linear polymers before the onset of Fickian NP diffusion. This strong suppression of NP motion occurs progressively as d exceeds a and is related to the hopping diffusion of NPs in the entanglement network. In contrast to the NP motion in linear polymers, the motion of NPs with d > a in ring polymers is not as strongly suppressed prior to Fickian diffusion. The diffusion coefficient D decreases with increasing d much slower in entangled rings than in entangled linear chains. NP motion in entangled nonconcatenated ring polymers is understood through a scaling analysis of the coupling between NP motion and the self-similar entangled dynamics of ring polymers. [ABSTRACT FROM AUTHOR]

Molecular dynamics simulations of a coarse-grained bead-spring model have been used to study the effects of molecular crowding on the accumulation of tension in the backbone of bottle-brush polymers tethered to a flat substrate. The number of bottle-brushes per unit surface area, Σ, as well as the lengths of the bottle-brush backbones Nbb (50 ≤ Nbb ≤ 200) and side chains Nsc (50 ≤ Nsc ≤ 200) were varied to determine how the dimensions and degree of crowding of bottle-brushes give rise to bond tension amplification along the backbone, especially near the substrate. From these simulations, we have identified three separate regimes of tension. For low Σ, the tension is due solely to intramolecular interactions and is dominated by the side chain repulsion that governs the lateral brush dimensions. With increasing Σ, the interactions between bottle-brush polymers induce compression of the side chains, transmitting increasing tension to the backbone. For large Σ, intermolecular side chain repulsion increases, forcing side chain extension and reorientation in the direction normal to the surface and transmitting considerable tension to the backbone. [ABSTRACT FROM AUTHOR]

Abstract: We report a fully general technique addressing a long standing challenge of calculating conformational free energy differences between various states of a polymer chain from simulations using explicit solvent force fields. The main feature of our method is a special mapping variable, a path coordinate, which continuously connects two conformations. The path variable has been designed to preserve locality in the phase space near the path endpoints. We avoid the problem of sampling the unfolded states by creating an artificial confinement “tube” in the phase space that prevents the molecule from unfolding without affecting the calculation of the desired free energy difference. We applied our technique to compute the free energy difference between two native-like conformations of the small protein Trp-cage using the CHARMM force field with explicit solvent. We verified this result by comparing it with an independent, significantly more expensive calculation. Overall, the present study suggests that the new method of computing free energy differences between polymer chain conformations is accurate and highly computationally efficient. [Copyright &y& Elsevier]