Search

Comprehensive Summary: Polymer dispersity (Đ) or molecular weight distribution (MWD) is a basic but vital parameter for the properties of polymeric materials. Developing new methodologies for controlling polymer MWD is emerging as a research hotspot. However, the methods to tune polymer MWD in cationic polymerization are still not well explored. Herein, we present a simple method to control the dispersity of poly(isobutyl vinyl ether) (PIBVE) by mixing two different chain transfer agents in batch visible light induced cationic RAFT polymerization. A broad dispersity range (Đ ≈ 1.16—1.80) was successfully achieved while maintaining monomodal MWD. Moreover, chain extension of PIBVE through both cationic polymerization and radical polymerization has been studied, which also provides a method to tune polymer MWD in mechanism transformation polymerization. [ABSTRACT FROM AUTHOR]

Selenium‐containing monomer (p‐phenylseleno) styrene (p‐PhSeSt) is polymerized by reversible addition‐fragmentation chain transfer polymerization. Polymer, (P(p‐PhSeSt)), with controlled molecular weight and narrow molecular weight is obtained. The selenide moiety in obtained P(p‐PhSeSt) can be selectively oxidized to selenoxide or selenone groups by H2O2 or NaClO, respectively. These oxidized groups can be further reduced to selenide by Na2S2O4. The structure changing of polymers during such redox cycle is characterized by nuclear magnetic resonance, X‐ray photoelectron spectroscopy, and size exclusion chromatography. Properties, such as thermal performance, glass transition temperature, water contact angles, and refractive indices, of the resulting polymers are systematically investigated before and after oxidation. In addition, SiO2 inverse opal photonic crystal (IOPC) is fabricated by sacrificial polymer colloidal template method. Owing to changes of the RIs of P(p‐PhSeSt) after selective oxidation, the predictable change of PC bandgap as a redox‐responsive PC sensor is successfully realized, which provides new perspectives for modulating photonic crystals. [ABSTRACT FROM AUTHOR]

Polymer molecular weight distribution (MWD) is a key parameter of polymers. Here we present a robust method for controlling polymer MWD in controlled cationic polymerizations. A latent mediator strategy was designed and combined with temporal programming to regenerate mediators at different times during polymerization. Both the breadths and shapes of MWD curves were tuned easily by adjusting an external light source. Bimodal, trimodal, and tetramodal distributions were obtained, and the breadths could be varied from 1.06 to 2.09. Polymers with different MWDs prepared by this method had good chain end fidelity, which was demonstrated with successful chain‐extension experiments. In addition, the introduction of temporal programming with a computer‐controlled single chip for the light source opened an avenue for the use of artificial intelligence in polymer synthesis. [ABSTRACT FROM AUTHOR]

Polymer molecular weight distribution (MWD) is a key parameter of polymers. Here we present a robust method for controlling polymer MWD in controlled cationic polymerizations. A latent mediator strategy was designed and combined with temporal programming to regenerate mediators at different times during polymerization. Both the breadths and shapes of MWD curves were tuned easily by adjusting an external light source. Bimodal, trimodal, and tetramodal distributions were obtained, and the breadths could be varied from 1.06 to 2.09. Polymers with different MWDs prepared by this method had good chain end fidelity, which was demonstrated with successful chain‐extension experiments. In addition, the introduction of temporal programming with a computer‐controlled single chip for the light source opened an avenue for the use of artificial intelligence in polymer synthesis. [ABSTRACT FROM AUTHOR]

Hyperbranched polycaprolactone with controlled structure was synthesized by reversible addition-fragmentation chain transfer radical ring-opening polymerization along with self-condensed vinyl polymerization (SCVP) of 2-methylene-1,3-dioxepane (MDO). Vinyl 2-[(ethoxycarbonothioyl) sulfanyl] propanoate (ECTVP) was used as polymerizable chain transfer agent. Living polymerization behavior was proved via pseudo linear kinetics, the molecular weight of polymers increasing with conversion and successful chain extension. The structure of polymers was characterized by 1H NMR spectroscopy, tripe detection gel permeation chromatography, and differential scanning calorimetry. The polymer composition was shown to be able to tune to vary the amount of ester repeat units in the polymer backbone, and hence determine the degree of branching. As expected, the degree of crystallinity was lower and the rate of degradation was faster in cases of increasing the number of branches. [ABSTRACT FROM AUTHOR]

Vinyl acetate is polymerized in the living way under the irradiation of blue light-emitting diodes (LEDs) or sunlight without photocatalyst at ambient temperature. 2-(Ethoxycarbonothioyl)sulfanyl propanoate is exclusively added and acts as initiator and chain transfer agent simultaneously in the current system. Poly(vinyl acetate) with well-regulated molecular weight and narrow molecular weight distribution (Ð < 1.30) is synthesized. Near quantitative end group fidelity of polymer is demonstrated by nuclear magnetic resonance (NMR) and matrix-assisteed laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). [ABSTRACT FROM AUTHOR]

A novel Janus compound containing azo-based thermal initiator and bromo-based atom transfer radical polymerization (ATRP) initiator group is synthesized. Such compound can be applied in the living radical polymerization of alkyl methacrylate monomers, such as methyl methacrylate, tert-butyl methacrylate, and 2-( N, N-dimethylamino) ethyl methacrylate. Polymers with controlled molecular weights and narrow molecular weight distributions are obtained. The structure of polymers is identified by 1H NMR spectroscopy and matrix-assisted laser desorption ionization time-of-flight mass spectrum. A modified initiator for continuous activator regeneration ATRP mechanism is proposed according to the polymerization behavior, hydrolysis of chain backbone, and end group identification. [ABSTRACT FROM AUTHOR]

[Display omitted] • First microflow cationic polymerization under ambient conditions. • No further purification of all reagents were required. • Well-defined poly(vinyl ether)s can be achieved within 2 min. Living cationic polymerization is a well-established method for preparing polymers with controlled molecular weights and complex architectures, but rigorous polymerization conditions limit its widespread application. Here, we report a facile strategy for simplifying the strict conditions required for traditional living cationic polymerizations of various vinyl ethers including ethyl vinyl ether (EVE), propyl vinyl ether (PVE), butyl vinyl ether (BVE) and isobutyl vinyl ether (IBVE) by utilizing continuous microflow reactors and a weak Lewis acid, zinc chloride (ZnCl 2). Well-defined polymers with controlled molecular weights and narrow molecular weight distributions (<1.20) can be obtained under ambient conditions without monomer purification, temperature control or strictly anhydrous conditions. The living nature of the polymerization was verified by kinetic experiments and successful in situ chain extension. [ABSTRACT FROM AUTHOR]

ABSTRACT The living free radical polymerizations of vinyl acetate (VAc) were successfully achieved in the presence of a novel organic selenium compound (diselenocarbonates), with 2,2′-azobisisobutyronitrile (AIBN) as the initiator. The living characteristics of the VAc polymerization were confirmed by the linear first-order kinetic plots and linear increase of molecular weights ( Mn) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions. In addition, the end of the polymers contains selenium element which may be useful in biotechnological and biomedical applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3159-3165 [ABSTRACT FROM AUTHOR]

Selenide-containing amphiphilic copolymers have shown significant potential for application in drug release systems. Herein, we present a methodology for the design of a reactive oxygen species-responsive amphiphilic diblock selenide-labeled copolymer. This copolymer with controlled molecular weight and narrow molecular weight distribution was prepared by sequential organoselenium-mediated reversible addition fragmentation chain transfer (Se-RAFT) polymerization and selenol-based nucleophilic reaction. Nuclear magnetic resonance (NMR) and matrix-assisted laser desorption/ionization time-to-flight (MALDI-TOF) techniques were used to characterize its structure. Its corresponding nanomicelles successfully formed through self-assembly from the copolymer itself. Such nanomicelles could rapidly disassemble under oxidative conditions due to the fragmentation of the Se–C bond. Therefore, this type of nanomicelle based on selenide-labeled amphiphilic copolymers potentially provides a new platform for drug delivery. [ABSTRACT FROM AUTHOR]