Search

The main focus of this review is to illustrate the amenability of self-assembled monolayers (SAMs) for functionalisation with different receptors, catalytic materials, biomolecules, enzymes, antigen-antibody, etc for various applications. The review discusses initially about the preparation and characterization of SAMs and tailoring of SAMs by incorporation of suitable recognition elements. A description of how the molecular recognition is achieved through forces like electrostatic, covalent and host-guest interactions is included in the review.

A soft route for the preparation of catalytically active multilayers of Pt films free from poisoning effects is reported. The SAMs (self-assembled monolayers) were initially formed on the gold substrates and they act as nucleating centers initiating the formation of multilayers of Pt on gold substrates. The nanoscale to mesoscale structures of Pt thus prepared were characterized by SEM and XPS. The SAM-based Pt structures exhibited well-defined hydrogen adsorption, desorption regions associated with very high charge indicating high surface area Pt. The electrocatalytic activity of the multilayers of Pt was characterized by methanol oxidation and a comparison was made with two commercial Pt catalyst preparations.

In this communication, we report a strategy for the preparation of Pt nanoparticles encapsulated in Generation 4.5 (Polyamido amine) PAMAM dendrimer and subsequent chemical linking of the nanocomposite to the gold electrode through a self assembled cystamine monolayer. The modification resulted in the formation of a robust electrochemically active thin film with very high surface area, reflected by the enhanced hydrogen adsorption coverage. Interestingly, TEM images revealed self-assembly of Pt nanoparticles and the SAED (Selected Area Electron Diffraction) patterns showed the presence of Pt single crystals (111). The Pt-dendrimer nanocomposite film obtained using the novel modification procedure exhibited high electrocatalytic activity for the oxidation of organic fuels like methanol, ethanol and ethylene glycol. The film did not suffer from degradation even after repeated use in solution-phase voltammetry. It is however observed that the intermediate SAM layer and the bulky PAMAM dendrimer (generation 4.5) have slowed down the electron transfer kinetics which is reflected by a relatively high overpotential for methanol oxidation. Nevertheless this shortcoming is more than compensated by the existence of Pt(111) planes, which alleviate CO poisoning.

Mixed self-assembled monolayer of thiols were formed on the electrode surface using aromatic and aliphatic thiols and the modified interface were used to demonstrate charge trapping behavior at the modified interface. The electrode surface was modified by two schemes. In Scheme 1, electrode surface modified with methylene blue (MB) shows charge trapping behavior when contacts the electrolyte containing potassium ferricyanide. In Scheme 2, a redox-active bilayer is constructed using hexamineruthenium (II) chloride and methylene blue. This redox-active bilayer assembly exhibits unidirectional flow of current.

Electrochemical sensing of glucose on a gold electrode modified by the sequential incorporation of the mediator, 1,4-diaminoanthraquinone (DAAQ) and the enzyme, glucose oxidase (GOD), through covalent linkage onto a self-assembled monolayer configuration is described in this paper. It has been shown that two alternate layers of enzyme and mediator could be formed on the surface. The modified electrode is catalytic towards glucose oxidation. The catalytic response becomes more well behaved with the two-layer configuration and it is demonstrated by the amperometric experiments. The results also indicated that the mediator catalyzes the oxidation of H2O2, and also it establishes a weak electrical communication between the enzyme and the electrode surface. The results present the scope for the fabrication of membrane-free biosensors of ultra-thin dimensions.

A phenomenon analogous to current rectification occurring in a diode could be demonstrated at the electrode/electrolyte interfaces constructed using a mixed monolayer configuration formed by the self assembly of decane thiol and thioctic acid. Two types of configuration have been described. In the first type (Configuration-1), diode like electron transfer is shown to occur in a ferrocene monocarboxylic acid functionalized mixed monolayer, in contact with the electrolyte containing potassium ferrocyanide. In the second type (Configuration-2), the functionalized mixed monolayer consists of two redox species ferrocene dicarboxylic acid and 1,4-diaminoanthraquinone linked through covalent linkage. This bilayer represents an electrochemical analogue of a diode and current rectification is observed.

Monomolecular level modification of electrode surfaces through a self-assembly approach is, of late, gaining importance in view of its many functional applications in areas such as molecular electronics, molecular recognition, electron transfer studies and electroanalysis. Self-assembled monolayer (SAM) modification of a gold electrode with 2-mercaptobenzimidazole (MBI) has been achieved. On this modified electrode, anodic stripping voltammetric determination of mercury at ppm/sub-ppm level concentrations has been successfully attempted. Pre-concentration, prior to stripping, has been effected through a non-electrolytic process involving chemical interactions between MBI and Hg(II). The results are described and discussed with a plausible scheme. Keywords: 2-Mercaptobenzimidazole, Self-assembled monolayer, Mercury(II), Anodic stripping voltammetry

The formation of metal monolayers through underpotential deposition (UPD) depends on the interactions between the electrode surface and the depositing species. Other adsorbable species, if present in the solution, will influence the formation of UPD metal films through their adsorption on the electrode surface, taking place simultaneously. Copper UPD formation on polycrystalline gold surfaces has been investigated in the presence of small amounts of urea, thiourea (TU) and N-substituted thioureas using cyclic voltammetry. The results show that the UPD of copper on gold is significantly influenced by the presence of thiourea in solution. The charge corresponding to the stripping peak obtained in the presence of both Cu2+ and TU in solution is always larger than the sum of the charges resulting when either of them is present alone. Again, the charge observed during stripping in the presence of both Cu2+ and TU is believed to arise from (i) stripping of the UPD Cu, (ii) adsorption–desorption of TU and (iii) oxidation of Cu(TU)n+ complexes. The addition of N-substituted TUs is found to influence the UPD of Cu to different extents. This is tentatively explained in terms of the structure of the organic molecules.

The monolayers of 2-mercaptobenzothiazole (MBT) on polycrystalline Au and Ag films have been studied by surface-enhanced Raman (SERS) and X-ray photoelectron (XPS) spectroscopies. Whereas MBT adsorbs with its molecular plane flat on Ag, its plane is perpendicular on Au. This difference in adsorbate geometry is manifested as differences in the intensities of certain vibrational peaks in the Raman spectra. Ab initio molecular orbital (MO) calculations suggest that MBT adsorbs on Au in the thione form and on Ag in the thiol form. The monolayers are stable up to a temperature of 473 K, much higher than most of the self-assembled monolayers (SAMs) studied so far. The adsorption geometry does not undergo any significant change when the monolayers are heated, although minor changes are observed in the SER spectra of the Ag monolayer. Raman intensities of all the bands increase with heating, and the enhanced intensity is preserved even after cooling. This is attributed to monolayer-induced coalescence of gold islands leading to the formation of an extended self-assembly. XPS studies confirm chemisorption, although structural details are not manifested. Copyright 1999 Academic Press.

Electrochemical studies on gold electrodes covered with self-assembled monolayers (SAM) of aminoethane thiol (AET), mercaptobenzothiazole (MBT) and octadecyl mercaptan (ODM) have been carried out using cyclic voltammetry. Study of the influence of these monolayers on the double layer capacity of the interfaces involving the Au/SAM electrodes and of the electron transfer kinetics of chosen redox reaction probes, viz., Fe(CN) 6 4−/3− , Fe2+/3+, hydroquinone/quinone(H2 Q/Q) and Cu underpotential deposition, offers a wealth of information that can throw light on the role of SAMs in allowing/moderating/blocking the electron transfer at such interfaces. These details are presented and discussed in the paper.

Electrochemical reactions occur at electrode/electrolyte interfaces. Hence, manipulation and design of electrochemical interfaces accompanied by surface modifications have assumed vital importance. Molecular level modification, either at the monolayer or multilayer level of electrode surfaces and leading to functionalization of electrodes, is being actively pursued by researchers. Modification based on the self-assembled monolayer approach has enabled electrodes to acquire molecular recognition and molecular electronic characteristics. Functionalization of electrode surfaces using polymeric materials and enzymes has facilitated electrodes in exhibiting properties like catalysis, molecular recognition, electrochromism and birefringence. The results of such molecular level functionalization studies of electrode surfaces carried out recently in our laboratories are presented in this overview. Besides, some representative results reported from elsewhere are also included.

Hexacyanoferrate modification of gold electrode has been achieved by immobilizing the species in a self-assembled monolayer of 3,3‘-thiodipropionic acid anchored to the gold surface. The surface coverage of hexacyanoferrate is estimated from the voltammetric data point to be about one monolayer, and the modified electrode exhibits excellent surface redox behavior. Further, it shows good electrocatalytic influence on the oxidation of hydrazine and ascorbic acid.

The codeposition of lead and thallium UPD's on polycrystalline silver has been investigated. Studies on the effect of deposition time on the formation of the codeposit suggest the codeposit to be a solid solution resulting from underpotentially deposited mono/submono layers of lead and thallium with the stoichiometric ratio of 1 : 2 (Pb : T1).

The formation and characterization of self-assembled monolayers of organosulfur compounds like alkanethiols and dialkyl (di)sulfides on metal surfaces such as gold are areas of current research interest. The presence of an aromatic ring in a thiol molecule can enhance the binding between Au and the thiol, resulting in the formation of compact and impervious self-assembled monolayers. The formation of a monolayer of 2-mercaptobenzothiazole (MBT), containing an aromatic group with a fused thiazole ring but no long alkyl chain, is achieved on a gold electrode surface. Voltammetric investigations of ferro/ferricyanide and ferrous/ferric redox systems carried out on this Au|MBT electrode are reported. Further, the possibility of using such an Au|MBT electrode to distinguish between inner and outer sphere electron transfer reactions is indicated.

The present work describes, for the first time, in situ electrochemical preparation of dendrimer-encapsulated Cu nanoparticles using a self-assembled monolayer of fourth-generation amine-terminated polyamidoamine (PAMAM) dendrimer as the template. Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) studies of the modified surface confirmed the presence of Cu nanoparticles entrapped in dendrimer film. Au electrode modified with a monolayer of the dendrimer enables preconcentration and subsequent voltammetric detection of Cu(2+) at picomolar concentrations. Further, Cu nanoparticles in the dendrimer monolayer could be electrochemically derivatised to Cu hexacyanoferrate, which exhibits specific crystal planes, unlike the random distribution of crystal planes in bulk-formed Cu hexacyanoferrate, which is another catalytically active material for sensor applications.

Formation of self assembled monolayers on gold surface by thiols and disulphides is a well known phenomenon and extensive research work has been carried out in this area with envisaged applications in the area of sensors, molecular electronics, lithography, device fabrication using bottom-up approach, etc. Recently, it has been established that thiophene molecules can self assemble on gold surface due to Au-S interactions. 3-(3-thienyl) acrylic acid, a bifunctional ligand is used in this work to form self-assembled monolayers on planar gold surfaces (two dimensional assemblies) and to prepare monolayer protected gold nano clusters (three-dimensional assemblies). The electron transfer blocking properties of the two-dimensional monolayers were evaluated by using standard redox probes like ferrocyanide anions and Ruthenium hexamine cations. The functionalisation of the two-dimensional and three-dimensional assemblies has been carried out with ferrocene carboxylic acid and the functionalised monolayers were characterized by Cyclic voltammetry. The formation of thienyl acrylic acid protected nanoclusters has been verified by TEM and surface plasmon resonance absorption. It has been observed that when thiophene based ligands are used as stabilizers for the formation of metal nanoparticles, they tend to aggregate as a result of pi-pi interactions between adjacent thiophene ligands. In this case it is found that aggregation is prevented. The substituent at the thiophene ring hinders pi-pi interactions. The quantised nature of electrochemical charging of these nanoparticles has been demonstrated by differential pulse voltammetry (DPV), which exhibit peak like features (coulomb's staircase). This work also explores the possibility of using 3-(3-thienyl) acrylic acid as building blocks or spacers on planar and colloidal gold surfaces for potential applications in the field of sensors and devices.

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine-terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self-assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and "dendrichips"; hence, they could find applications in the fields of sensors, fuel cells, and waste-water treatment.

A gold electrode surface has been modified with a monolayer of 3,3'-thiodipropionic acid (TPA) by self-assembly. The pH-sensitive TPA monolayer is further derivatized to form a monolayer of nickel hexacyanoferrate. This electrode shows molecular discrimination between potassium and sodium ions and exhibits a near-Nernstian response, with a slope of 55 mV/decade to potassium ions in the range from 10 -2 to 1 M.

The formation of self-assembled monolayers (SAM) of 5,5'-dithiobis (2-nitrobenzoic acid), DNBA on gold has enabled further derivatization of the electrode surface with functional moieties anchored to the surface bound molecules. A SAM of DNBA was formed on the Au surface. Nickel ions tethered to the SAM-covered Au surface, were subsequently derivatized electrochemically to yield nickel hydroxide overlayers, thereby showing the possibility of preparing ultra-thin films of metal oxides through solution chemistry. The nickel hydroxide surface coverage obtained on bare and SAM-covered electrodes was estimated from voltammetric peaks and it varied from one monolayer to about 300 monolayers. The formation of a monolayer of nickel hydroxide has been achieved for the first time by electrochemical modification. Further, the modified electrodes were subjected to SERS and XPS studies to understand their surface characteristics. Modified electrodes provide a catalytic pathway involving nickel hydroxide for the electro-oxidation of glucose in alkaline solutions.