Search

A multi-monopole-antenna system capable of generating two wide operating bands with good input matching by a voltage standing wave ratio (VSWR) of 1.5 to cover the 2.4 GHz (2400-2484 MHz), 5.2 GHz (5150-5350 MHz), and 5.8 GHz (5725-5825 MHz) bands for wireless local area network (WLAN) applications is introduced. The design mainly comprised three, metal-plate monopole antennas symmetrically located on a main, hexagonal ground plane and backed by vertical, step-shaped grounds protruding thereon. The step- shaped grounds not only facilitated the attaining of wide impedance bandwidth but also good port isolation. In addition, directional antenna radiation was also produced. Further, a triangular-cylinder shielding wall was placed in the center of the main ground plane for integration of the wireless, surveillance-camera module into the proposed antenna system. Details of the design prototype are described and discussed in the article. [ABSTRACT FROM AUTHOR]

A multi-monopole-antenna system capable of generating two wide operating bands with good input matching by a voltage standing wave ratio (VSWR) of 1.5 to cover the 2.4 GHz (2400-2484 MHz), 5.2 GHz (5150-5350 MHz), and 5.8 GHz (5725-5825 MHz) bands for wireless local area network (WLAN) applications is introduced. The design mainly comprised three, metal-plate monopole antennas symmetrically located on a main, hexagonal ground plane and backed by vertical, step-shaped grounds protruding thereon. The step-shaped grounds not only facilitated the attaining of wide impedance bandwidth but also good port isolation. In addition, directional antenna radiation was also produced. Further, a triangular-cylinder shielding wall was placed in the center of the main ground plane for integration of the wireless, surveillance-camera module into the proposed antenna system. Details of the design prototype are described and discussed in the article. [ABSTRACT FROM AUTHOR]

A standalone, printed monopole antenna with a two-branch shorting strip and a grounding wire to achieve a small size and yet multi-band operation for penta-band wireless wide area network (WWAN) operation (824-960/1710-2170 MHz) is presented. The antenna was formed on a low-cost, single-layered dielectric substrate with the dimensions 10mm x 50 mm. By applying the proposed grounding wire and the dual-shorting strip, two resonant modes in close proximity in the antenna's lower band were obtained to cover the GSM850/900 operation. Further, the proposed shorting strip led to two additional, higher-order resonance excitation at about 1700 and 1800MHz to assist in the formation of a wide upper band to cover the GSM1800/1900/UMTS operation. The proposed antenna also showed good radiation properties. Details of the design are described and discussed in the article. [ABSTRACT FROM AUTHOR]