Search

Purpose: Feasibility of silica-based dosimeters for IVD of HDR prostate brachytherapy., Material and Methods: Plastic dosimeter holders and a water-fillable prostate phantom were built in-house. Interstitial prostate brachytherapy and Monte Carlo simulations were performed. The treatment planning, Monte-Carlo simulation, and dosimetry results were compared., Results: The relative differences between TLD-TPS, TLD-MCNP, and TPS-MCNP were 0.2-6.9 %, 0.5-6.5 %, and 0.6-6.3 %, respectively., Conclusion: Micro-silica bead dosimeters can perform offline in situ quality assurance in HDR prostate brachytherapy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Introduction In order to treat uveal Melanoma, first, radioactive seeds are laid on a silicone- made substance which is called Silastic after that they are inserted in the plaque, and finally, this plaque containing silicone-made substance is stitched to the sclera surface. The dose gradient within the tumor and healthy tissues can be varied due to changing the Silastic thickness between sclera surface and radioactive seeds. In turn, this leads to difference in the amount of absorbed dose of tumor and healthy tissues. Present study is to investigate the optimum Silastic thickness in uveal Melanoma brachytherapy. Materials and Methods To measure changes of depth dose of the plaque in a sphere with a radius of 12 mm, MCNP4C code was applied. Exact specifications of a 20-mm Collaborative Ocular Melanoma Study (COMS) plaque, Silastic and three I-125 seed sources, 6711 model were integrated in simulation. Dose calculations were performed using F6 tally in spheres with a radius of 0.2 mm. Results By measuring the changes of dose rate of plaque in distances of 0.2 to 18 mm from the sclera surface and having the prescribed dose for the absolute treatment of eye melanoma, final absorbed doses by tumor and healthy tissues for each different Silastic thicknesses of 0, 0.5, 1, 1.5, and 2 were calculated. Conclusion Considering the results and sclera tolerance, it was concluded that the thickness of Silastic must not exceed 0.5 mm, because increasing the Silastic thickness from this area, increases absorbed dose by healthy tissues and also the treatment time. [ABSTRACT FROM AUTHOR]

Aims: This study investigates to what extent the dose received by lungs from a commercially available treatment planning system, Ir-192 high-dose-rate (HDR), in breast brachytherapy, is accurate, with the emphasis on tissue heterogeneities, and taking into account the presence of ribs, in dose delivery to the lung. Materials and Methods: A computed tomography (CT) scan of a breast was acquired and transferred to the 3-D treatment planning system and was also used to construct a patient-equivalent phantom. An implant involving 13 plastic catheters and 383 programmed source dwell positions were simulated, using the Monte Carlo N-Particle eXtended (MCNPX) code. The Monte Carlo calculations were compared with the corresponding commercial treatment planning system (TPS) in the form of percentage isodose and cumulative dose-volume histogram (DVH) in the breast, lungs, and ribs. Results: The comparison of the Monte Carlo results and the TPS calculations showed that a percentage of isodose greater than 75% in the breast, which was located rather close to the implant or away from the breast curvature surface and lung boundary, were in good agreement. TPS calculations overestimated the dose to the lung for lower isodose contours that were lying near the breast surface and the boundary of breast and lung and were relatively away from the implant. Conclusions: Taking into account the ribs and entering the actual data for breasts, ribs, and lungs, revealed an average overestimation of the dose by a factor of 8% in the lung for TPS calculations. Therefore, the accuracy of the TPS results may be limited to regions near the implants where the treatment is planned, and is a more conservative approach for regions at boundaries with curvatures or tissues with a different material than that in the breast. [ABSTRACT FROM AUTHOR]

Iridium-192 brachytherapy dose enhancement by gold nanoparticles was investigated in five different tumor tissues to observe the tissue-related differences as an effective environmental factor in the applications of nanoparticles as radio-enhancer agents. The brachytherapy high-dose-rate source of BEBIG Ir-192, a tumor volume with five different tissues including water, Plexiglas, soft tissue, adipose, and bone with and without a uniform distribution of gold nanoparticles were mimicked by MCNPX Monte Carlo simulation code using lattice feature. Dose enhancement factors in the tumor volume were measured separately regarding the types of tissue, and a previous study using GEometry ANd Tracking 4 simulation was used for result validation. The results demonstrated that various types of tissue, as the host of gold nanoparticles, lead to different dose enhancement level, so that the bone and adipose have the lowest and the highest amount of dose enhancement factor with values 20.8% and 39.75%, respectively. The maximum difference of 4.8% was achieved from data benchmarking. The results of this study indicate that the MCNPX code can be used as a valid tool for dose measurement in the presence of nanoparticles. Moreover, tissue types of tumor as an environmental feature, alongside with the nanoparticle's size and concentration as well as the conditions of radiotherapy, should be considered in the dose calculation. [ABSTRACT FROM AUTHOR]

To investigate the 106Ru dose distribution in an intraocular pseudotumor by micro silica glass beads thermo-luminescence dosimeters (TLD). Dosimetry was conducted using Monte Carlo (MC) simulation as well as an experimental setup by employing an in-house eye equivalent phantom. A BEBIG CCA model of 106Ru plaque was used. Bead TLDs were modeled using MCNPX code, choosing water and plexiglass as phantom mediums along with CCA plaque. The deposited energy and electron energy spectra were calculated using *f8 and f4 tallies, respectively. A dedicated eye-equivalent phantom was designed and fabricated by 3D-printing techniques to place glass beads. Absorbed dose at the central axis of the CCA plaque by beads TLDs was compared to manufacturer-reported data and simulation results. Maximum, minimum, and mean relative differences of 23%, 7%, and 15% with the manufacturer and 14%, 0%, and 1.6% with the simulation were obtained, respectively. Replacing glass bead material with water resulted in an average relative difference of 33.9% in absorbed energy per mass unit, corresponding to 21% and 44.8% at the first (0.5 mm depth) and last dosimetry points (9.5 mm depth), respectively. It has also been shown that glass beads can shadow each other, leading to a dose reduction of 15%. A specific eye equivalent phantom with a pseudotumor was constructed, and silica glass beads were used for dosimetry. The results of the experiment and the MC simulation are in good accord. In the case of 106Ru ophthalmic brachytherapy plaque dosimetry, replacing glass beads material with water led to a mean difference of about 34% as well as shadowing effects. This emphasizes how crucial it is to employ a reliable correction factor in clinical applications. • Creating an eye equivalent phantom capable of introducing different materials as tumour foundation. • Using TLD glass beads as a dosimeter in ocular plaque dosimetry. • Monte Carlo analysis of glass beads' material as a dosimeter. • Glass beads vs. water show 33.95% dose difference in CCA plaque dosimetry, highlighting correction factor importance. [ABSTRACT FROM AUTHOR]