Search

Thin coating layers of cross-linked polydimethylsiloxane (PDMS) and inorganic particles including glass spheres (GS), colloidal and fumed silica (aero and N20), montmorillonite (MMT), and kaolin (K) were attached onto Grade 1 Whatman filter paper (WFP) substrates using the spraycoating procedure to achieve superhydrophobic hybrid paper sheets. Coating formulations were varied in terms of their PDMS molecular masses and inorganic particles to prepare different samples. The effect of PDMS molecular weight and change in inorganic particle composition on the optical properties, surface roughness, barrier properties, surface chemistry, and topography was investigated. Hybrid paper sheets with ΔE00 values lower than 1 could be achieved, the surface roughness of which could be decreased by increasing the PDMS molecular weight in the coating formulation. Scanning electron microscopy studies revealed a homogeneous coating distribution, resulting in significant improvements in both the air and water barrier properties of the hybrid paper sheets. Spectroscopic investigations revealed the presence of interactions between the coating layer and the underlying paper substrate. Moreover, the distribution behavior of the inorganic particles on the spraycoated surfaces using the proposed method was also investigated using model compounds. [ABSTRACT FROM AUTHOR]

Silver-clay nanohybrids based on silver nanoparticles (AgNPs) with montmorillonit (MMT) and milled MMT, shortly AgMMTnano and AgMMTmilled, have been prepared to improve the performance of antibacterial properties of paper. The results obtained by dynamic light scattering indicated the presence of silver particles in the nanometer range, which have a great accumulation tendency. The results of AAS and ICP-AES tests showed that nanosilver amount in the AgMMTmilled was doubled compared to the AgMMTnano, but according to the EDX results, the amount of nanosilver in paper treated with the former was less than in the latter. FE-SEM images showed that the dimensions of deposited nanosilver on the surface of clay were smaller than in case of AgNPs alone. Papers treated with nanohybrids had better antibacterial properties compared to that prepared by naked nanosilver. It was also found that the antibacterial property of papers treated with AgMMTnano were more stable during three-stage tests compared to those with AgMMTmilled. Nanohybrids with Ag conc. more than 15 ppm, especially hybrids with Ag conc. of 50 ppm, result in a significant improvement in antibacterial properties of paper. It can be concluded that silver-clay nanohybrid with a 25-ppm concentration of nanosilver could be the best and most economic antibacterial component. [ABSTRACT FROM AUTHOR]

In this study, a suitable method is reported to produce reinforced antibacterial paper packaging using the antimicrobial triclosan (TC) and organically modified montmorillonite (OMMT) as 'model' compounds. Direct incorporation of TC at a concentration of 1 wt% and OMMT at concentrations of 1, 4, 7, and 10 wt% into papers was performed via coating process, and the resulting materials were characterized by in vitro antimicrobial assays, thermogravimetric analysis, scanning electron microscopy, mechanical tests, and water vapor transmission rate determinations. It was demonstrated that the presence of 1% TC in the coated papers exhibited inhibitory effects against Staphylococcus aureus and Escherichia coli. It was also pointed out that increases of approximately 30% in the tensile strength of commercial paper are obtained by using the OMMT at a concentration of 1 wt%. Water barrier property and thermal stability of paper were also enhanced because of the coating process and the incorporation of OMMT. The results from this study demonstrate that OMMT has a great potential to be incorporated into coating formulations to obtain antibacterial-coated papers with improved properties for various packaging applications. Copyright © 2011 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

In this study antibacterial coated paper packaging with improved properties were prepared from incorporation of nanoclay montmorillonite and antimicrobial triclosan into coatings. The materials were characterized by mechanical and antimicrobial tests, water barrier and thermal analysis. It was demonstrated that use of nanoclay increases significantly the tensile strength of coated papers, besides increase the thermal stability of them. All triclosan-containing papers presented inhibitory effect against Staphylococcus aureus and Escherichia coli. In addition, all coated papers presented superior water barrier due to coating process. The new nanocomposite developed shows great potential for antimicrobial packaging applications. [ABSTRACT FROM AUTHOR]

The article focuses on a study which described the production of a portable biofilter unit for the removal of odor and colors from wastewaters. Paper pulp and montmorillonite clay were used as packing materials for the fabrication of the biofilter. These reduced the turbidity of the different effluents studied. They also effectively removed the color of the effluent and produced an odorless effluent.