Search

Air entrainment in cement-based materials is believed to be affected by low air pressure (AP) which is the atmospheric characteristic in high plateaus, and thus the rheology may be affected. This paper attempts to study rheology and air entrainment of fresh Portland cement mortar in simulated low APs. The results indicate that the rheological responses with the varying AP gradients are relevant to the air entrainments in fresh mortar mixtures. The volume changes of air voids in fresh mortars are linearly related to the varying APs, which is owing to not only the AP difference between the inside and outside air voids but also the additional pressure on the liquid films of air voids stemming from the surface tension changes. Moreover, the Bingham capillary number is calculated to account for the air void deformability. Then rheological parameters are correlated to the content and deformability of air voids in fresh mortars. [ABSTRACT FROM AUTHOR]

• Buildability of 3D printing mortar was evaluated by the deformation of stacking layers. • A deformation monitoring device was designed to monitor the deformation of printing layer. • An equation between the optimal interval time and structural build-up rate was proposed. The buildability of fresh concrete is of great importance to 3D printing technology. In this paper, the buildability of 3D printing mortar was evaluated from the perspective of deformation of fresh mortar during the process of printing. A deformation monitoring device was designed to monitor the change of deformation of printing layer with stacking. The physical and chemical effects on the evolution of structural build-up were evaluated by the growth rate of static yield stress and penetration resistance. Results showed that the chemical effect was more effective than the physical effect, and the combination of physical and chemical effects was the most effective one. The growth of penetration resistance had a linear relationship with the growth of static yield stress, and both of them can be used to characterize the structural build-up of fresh mortar. The deformation value and optimal printing interval time could be obtained by simulating the printing process using the deformation monitoring device. An equation between the optimal interval time and the growth rate of static yield stress was established. [ABSTRACT FROM AUTHOR]

• The rheological properties of AAS pastes have been improved by low surface free energy mineral admixtures. • The surface free energy properties of low surface free energy mineral admixtures have been determined by IGC method. • The interparticle forces were calculated to reveal the mechanism for rheological improvement. This study investigates the effect of low surface free energy mineral admixtures (CaF 2 -dominated fluorite (FL) and fluorine-containing lithium slag (LS)) on the rheological behavior of alkali-activated slag (AAS) pastes. The fluidity, rheological behavior, surface charge properties and surface free energy properties were tested. The interparticle forces based on extended Derjaguin-Landau-Verwey-Overbeek (EDLVO) theory were calculated to understand the mechanism for the rheological behavior improvement. The results revealed that both FL and LS could improve the fluidity and decrease the yield stress and plastic viscosity of AAS pastes. Furthermore, the attraction is manifested by the sum of electrostatic, van der Waals, and Lewis acid-base forces, and this value decreases with increasing LF or LS content, implying that the particle dispersion in AAS pastes is improved. Furthermore, observing flocculent structures captured by the metallographic microscope proves the better dispersion of AAS pastes after adding FL and LS. Moreover, incorporating LS or FL decreases the flexural and compressive strengths of AAS mortars. [ABSTRACT FROM AUTHOR]