Search

• The waste heat of extraction - extractive distillation is recovered by heat integration and organic Rankine cycles. • Compared with the heat-integrated process, organic Rankine cycle assisted process save 8.88% total annual cost. • The control scheme of organic Rankine cycle assisted extraction - extractive distillation process shows good robustness. The high-purity isopropanol butanol ethanol (IBE) mixture is a highly efficient gasoline additive that can be directly used without further separation. The product of isopropanol-butanol-ethanol fermentation contains a large amount of water, and a large amount of energy will be consumed in the purification process. In this paper, the separation IBE process is systematically studied from the aspects of process optimization, energy recovery and process control. The operation parameters of extraction combined with extractive distillation (E-ED) are optimized by a multi-objective genetic algorithm. Then, the pinch point technique is used to analyze the energy usage of the optimized process, and the maximum heat recovery heat integration scheme is obtained. Compared with the optimized process, the low pressure steam consumption of the heat integration process is reduced by 100%, the cooling water consumption is saved by 58.80%, and the TAC is reduced by 35.95%. In view of massive waste heat in the heat integration of the extraction combined with extractive distillation (E-ED-HI) process, a new configuration combining the E-ED-HI and organic Rankine cycle (E-ED-HI-ORC) is further proposed. The organic Rankine cycle using R600a can further reduce TAC by 8.88% based on the HI-E-ED process. Finally, the control scheme of E-ED process is proposed. The performance of the control scheme is examined with ±10% disturbance of the feed flow rate and composition change, and the results show that the process of extractive distillation and separation of IBE has good controllability. [ABSTRACT FROM AUTHOR]

[Display omitted] • A new different pressure extractive distillation strategy is proposed. • The feasible ranges of entrainer/feed flow rate ratio and reflux ratio are determined. • The variables are optimized by an improved non-dominated sorting genetic algorithm. • The improved control scheme with feedforward loops performs the best robustness. Acetone and methanol are critical industrial feedstocks as well as organic solvents. Previous studies on the separation of the minimum-boiling azeotrope acetone-methanol by pressure-swing extractive distillation have shown superiority in terms of energy and cost savings. However, the pressure-varying configuration inevitably requires high-grade heat steam. To surpass the limitation, a novel different pressure extractive distillation strategy is proposed in this paper. The conceptual design of the different pressure extractive distillation configuration is carried out from thermodynamic insights, and the feasible ranges of entrainer/feed flow rate ratio and reflux ratio are determined. The design parameters are optimized by an improved non-dominated sorting genetic algorithm. Compared with the conventional extractive distillation process, the total annual cost (TAC) and CO 2 emissions of the proposed process are reduced by 22.17% and 48.14%, respectively. An alternative different pressure extractive distillation process with feed preheating is then obtained by changing feed thermal condition, which has a 24.08% reduction in TAC and a 48.33% reduction in CO 2 emissions in comparison with the conventional extractive distillation process. Compared with the existing heat-integrated pressure-swing extractive distillation process, the new process has a 2.90% and 22.36% reduction in TAC and CO 2 emissions, respectively. Subsequently, two control schemes are presented by calculating controllability indicators in the steady-state design stage. The results illustrate that the improved control scheme with multiple feedforward control loops performs the best robustness. [ABSTRACT FROM AUTHOR]