Search

Cascaded multicell converter (CMC) is one of the effective solutions for medium-voltage high-power drives. The inability to regenerate power back to the source is one of the limitations of this converter. The regeneration capability is obtained by using a pulsewidth-modulated active rectifier instead of a conventional three-phase passive rectifier in each cell. However, due to their two-level voltage operation at the input side, an inductor is required for each cell to filter out the switching frequency components from the input current. This paper proposes a new configuration of regenerative CMC based on coupled inductor to achieve multilevel voltage at the transformer secondary terminals. This allows us to operate the rectifier devices at reduced switching frequency. The coupled inductor reduces the total harmonic distortion (THD) of the transformer secondary current and thus the transformer size. The size of the filter inductor and the transformer ratings are compared. The operating principle and the detailed analysis are presented. A technique to bypass a faulty module is proposed. The working of the converter is verified through simulation and experimental studies. [ABSTRACT FROM AUTHOR]

In recent years, modular multilevel converter (MMC) is considered for medium-voltage variable speed drives (VSD) due to its modularity and higher reliability. However, the major drawback of the MMC-based VSD is the higher capacitor ripple voltage at lower operating speeds. In literature, this ripple voltage is reduced by injecting a high-frequency circulating current into each arm. This additional circulating current increases the overall current rating of the devices, inductors, and capacitors. Alternatively, the capacitor ripple voltage can be reduced at the lower output frequency by reducing the dc-bus voltage. This paper proposes a new configuration using a multipulse diode-bridge rectifier to reduce the dc-bus voltage when the drive is operated at lower speeds. Therefore, the capacitor ripple voltage decreases without injecting any circulating current. In addition, a new technique is proposed to maintain the peak-to-peak value of the submodule capacitor ripple voltage constant at near-zero speed. The proposed converter with 24-pulse rectifier configuration is simulated in MATLAB/Simulink, and the experimental validation is carried out on a prototype with 12-pulse rectifier. [ABSTRACT FROM AUTHOR]