Search

Limited research on the gross anatomy of the blood vessels has been conducted on hylobatids, or lesser apes, so far. Here, we present a detailed study of the arteries of siamangs (Symphalangus) and compare our findings with data compiled from our previous studies as well as from the literature about other hylobatids, greater apes, and humans. In particular, a three-dimensional full-body computed tomography data set of a siamang neonate was analyzed in detail for this study, with notable findings in the head and neck, thorax, upper limb, abdomen and pelvis, and lower limb. Of the 62 arteries that we studied in detail, a total of 20 arteries that have never been described in detail in hylobatids are reported in this study. Key similarities to other apes differing from humans include the existence of a humeral common circumflex trunk and the origination of the dorsalis pedis from the posterior tibial artery or saphenous artery instead of the anterior tibial artery. Similarities to humans differing from other apes include the separation of the lingual and facial arteries and the origination of the profunda brachii from the brachial artery instead of the axillary artery. Our research and broader comparisons, therefore, contribute to knowledge about the soft tissues of hylobatids, other apes, and primates in general and facilitate a better understanding of the anatomical evolution and key differences and similarities among these taxa., (© 2022 Wiley Periodicals LLC.)

Evaluation of the biomechanical properties of soft tissues by measuring the stress-strain relationships has been the focus of numerous investigations. The accuracy of stress depends, in part, upon the determination of the cross-sectional area (CSA). However, the complex geometry and pliability of soft tissues, especially ligaments and tendons, make it difficult to obtain accurate CSA, and the development of CSA measurement methods of soft tissues continues. Early attempts to determine the CSA of soft tissues include gravimetric method, geometric approximation technique, area micrometer method, and microtomy technique. Since 1990, a series of new methods have emerged, including medical imaging techniques (e.g. magnetic resonance imaging (MRI), computed tomography (CT), and ultrasound imaging (USI)), laser techniques (e.g. the laser micrometer method, the linear laser scanner (LLS) technique, and the laser reflection system (LRS) method), molding techniques, and three-dimensional (3D) scanning techniques., (© 2020 The Authors. Orthopaedic Surgery published by Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.)

In the musculoskeletal system, tumor-like lesions may present similar imaging findings as bone and soft tissue tumors and can be defined as tumors on radiologic examinations. Misinterpretation of the imaging findings can lead to inappropriate clinical management of the patient.There is still some debate regarding the pathophysiology and origin of tumor-like lesions that include congenital, developmental, inflammatory, infectious, metabolic, reactive, posttraumatic, post-therapeutic changes, and some miscellaneous entities causing structural changes. Although tumor-like lesions are historically defined as non-neoplastic lesions, some of them are classified as real neoplasms.We discuss a spectrum of entities mimicking tumors of bone and soft tissues that include various non-neoplastic diseases and anatomical variants based on imaging findings. [ABSTRACT FROM AUTHOR]

The objectives of this observational, cross-sectional study were to characterize and establish the prevalence of osseous proliferation of articular surfaces, joint margins and adjacent soft tissue attachments (i.e., joint capsule and deep spinal muscles) in a mixed population of horses of variable ages, sizes, and breeds to better capture the full spectrum of disease affecting the cervical articular processes. Cranial and caudal articular processes of the cervical and first three thoracic vertebrae (C2-T3) from 55 horses without a primary complaint of neck pain were evaluated for the presence and severity of abnormal bony changes. Data were analyzed to compare alterations in joint margin quadrants, paired articular surfaces within a synovial articulation, left-right laterality, and vertebral level distributions and to determine associations with age, wither height and sex. Seventy-two percent of articular processes had bony changes that were considered abnormal. Osteophyte formation was the most common bony change noted. Overall grades of severity included: normal (28%), mild (45%), moderate (22%), and severe (5%). The highest prevalence of mild changes was localized to the C3-C6 vertebral levels; moderate changes to C6-T2; and severe changes to C2-C3 and C6-T2. Most paired articular surfaces and left-right grades of severity were not significantly different. The grade of osseous pathology was positively associated with both age and wither height. A high prevalence and wide variety of abnormal bony changes of varying severity were found in articular processes across all vertebral levels. The clinical significance of the described lesions is unknown, but the findings are expected to enhance the reporting of articular process and periarticular changes noted on advanced diagnostic imaging of the equine cervical and cranial thoracic vertebral regions. [ABSTRACT FROM AUTHOR]

Purpose: The General Electric (GE) Swiftscan solution combines a new Low Energy High Resolution and Sensitivity collimator (LEHRS) with image processing (Clarity 2D) and tomographic step and shoot continuous mode. The aim of this study was to compare clinical and physical performances of this new technology in bone scintigraphy. Methods: Physical phantom measurements were performed using GE LEHRS, GE Low Energy High Resolution (LEHR) and Siemens LEHR collimators. These measurements were associated with a prospective clinical study. Sixty-seven patients referred for bone scintigraphy were enrolled from February to July 2018. Each patient underwent two acquisitions consecutively on GE and Siemens gamma camera, using respectively Swiftscan solution and LEHR collimator. Results: On planar acquisitions, maximum sensitivity was 100 cts/MBq for Siemens LEHR. GE SwiftScan LEHRS and GE LEHR maximum sensitivity were respectively 9% and 22% lower. Using Clarity 2D, GE Swiftscan LEHRS spatial resolution was the best with 9.2 mm versus 10.1 mm and 10.6 mm for GE LEHR and Siemens LEHR collimators. In tomographic mode, the sensitivity of GE Swiftscan solution was superior to both LEHR systems (16% and 25% respectively for Siemens and GE). There was no significant difference in spatial resolution. In clinical use, signal was higher on Siemens system and noise was lower on GE Swiftscan solution. Contrast-to-noise ratios were not significantly different between the two systems. There was a significant image quality improvement with GE SwiftScan in planar images and in whole body scan. No significant difference in image quality was observed on SPECT images. Conclusion: New GE SwiftScan collimator design improved sensitivity compared to “classical” GE LEHR collimator without compromising resolution. GE SwiftScan solution enhances planar image quality with a better Clarity 2D resolution recovery and noise treatment. In SPECT mode, GE SwiftScan solution improves volumetric sensitivity without significant impact on image quality, and could lead to time or dose reduction. [ABSTRACT FROM AUTHOR]

Objective: To assess the cephalometric skeletal and soft-tissue of functional appliances in treated versus untreated Class II subjects in the long-term (primarily at the end of growth, secondarily at least 3 years after retention). Search methods: Unrestricted electronic search of 24 databases and additional manual searches up to March 2018. Selection criteria: Randomised and non-randomised controlled trials reporting on cephalometric skeletal and soft-tissue measurements of Class II patients (aged 16 years or under) treated with functional appliances, worn alone or in combination with multi-bracket therapy, compared to untreated Class II subjects. Data collection and analysis: Mean differences (MDs) and 95% confidence intervals (95% CIs) were calculated with the random-effects model. Data were analysed at 2 primary time points (above 18 years of age, at the end of growth according to the Cervical Vertebral Maturation method) and a secondary time point (at least 3 years after retention). The risk of bias and quality of evidence were assessed according to the ROBINS tool and GRADE system, respectively. Results: Eight non-randomised studies published in 12 papers were included. Functional appliances produced a significant improvement of the maxillo-mandibular relationship, at almost all time points (Wits appraisal at the end of growth, MD -3.52 mm, 95% CI -5.11 to -1.93, P < 0.0001). The greatest increase in mandibular length was recorded in patients aged 18 years and above (Co-Gn, MD 3.20 mm, 95% CI 1.32 to 5.08, P = 0.0009), although the improvement of the mandibular projection was negligible or not significant. The quality of evidence was ‘very low’ for most of the outcomes at both primary time points. Conclusions: Functional appliances may be effective in correcting skeletal Class II malocclusion in the long-term, however the quality of the evidence was very low and the clinical significance was limited. Systematic review registration: CRD42018092139 [ABSTRACT FROM AUTHOR]

A personalized pelvis and femur shape is required to build a finite element buttock thigh model when experimentally investigating seating discomfort. The present study estimates the shape of pelvis and femur using a principal component analysis (PCA) based method with a limited number of palpable anatomical landmarks (ALs) as predictors. A leave-one-out experiment was designed using 38 pelvises and femurs from a same sample of adult specimens. As expected, prediction errors decrease with the number of ALs. Using the maximum number of easily palpable ALs (13 for pelvis and 4 for femur), average errors were 5.4 and 4.8 mm respectively for pelvis and femur. Better prediction was obtained when the shapes of pelvis and femur were predicted separately without merging the data of both bones. Results also show that the PCA based method is a good alternative to predict hip and lumbosacral joint centers with an average error of 5.0 and 9.2 mm respectively. [ABSTRACT FROM AUTHOR]

African ostrich (Struthio camelus) is the largest and fastest extent bipedal animal. The ostrich mainly relies on the 3rd toe to support the entire body under high-speed motion. The short and severe impact concentrated on the limited area would produce tremendous momentary internal stress and strain, which may contribute to the phalanges disloaction, soft tissue damage and the like. The vibration and excessive negative acceleration caused by the ground reaction force also affect the stability of the touching process. Therefore, ostrich toe pads are required to have excellent cushion characteristics. However, current studies often explains the cushion properties by analyzing the macro-microscopic structure of the pad organism, and there is a paucity of research on its biomechanical behaviour. Consequently, from the perspective of multi-layer structure and biomaterial assembly, this study aims to explain the biomechanical characteristics of the ostrich toe pads by FEM (Finite Element Method) analysis. Based on results, we deem that the ostrich toe pad could absorb energy and reduce vibration effectively. Firstly, the multi-layer structure of the pads make the stress and strain decay from outside to inside. Secondly, the minimal response frequency of the pad is 164.22 Hz, making it effectively avoid resonance phenomenon. Finally, the composite material model has the best performance in decreasing the negative acceleration peak value, the impact force peak value and the maximal equivalent stress value at velocities of 0.669 m/s and 1.339 m/s. These results help to further understand the buffer mechanism of the ostrich toe pad, and also have important inter-species reference value for the pathogenesis of human foot soft tissue injury. [ABSTRACT FROM AUTHOR]

A robust and stratified pre-clinical natural knee model, which has the capability to more appropriately simulate the biomechanical environment in vivo, will deliver more efficient and reliable assessment of soft tissue interventions before clinical studies. In order to simulate the biomechanical function of the natural knee without the natural ligaments in place, there is a requirement to develop appropriate spring constraints for the natural knee model. Therefore, this study was to investigate the effect of spring constraints on the function and output of the natural porcine knee model, and determine the spring constraint which most closely replicated the function of the natural ligaments. Two linear compression springs with stiffnesses of 9 N/mm (spring-9) and 20 N/mm (spring-20) were set at different free lengths in the anterior-posterior (A/P) axis in a natural knee simulator. The kinematic (A/P displacement) and tribological properties (shear force) output of the simulator were compared at different spring settings. The most appropriate spring setting was determined by comparing the A/P displacement and shear force output at different spring settings with those of the all ligaments model. Spring-9 with a free length of 4 mm showed the minimal difference (-0.03±0.68 mm) in A/P displacement output and spring-20 with a free length of 5 mm showed the minimal difference (-0.10±0.73 mm) in A/P displacement output compared to the all ligament control. There was no statistical difference between the two minimal differences either in A/P displacement or in shear force (paired t-test, p = 0.58, and p = 0.68 respectively) when both spring settings matched most closely to the A/P kinematics of the intact knee. This indicated that both conditions were appropriate spring constraints settings in the A/P direction for the natural porcine knee model. [ABSTRACT FROM AUTHOR]

Objectives: To investigate the feasibility, diagnostic image quality and radiation dose of 3rd generation dual-source computed tomography (CT) using a tin-filtered 100 kV protocol in patients with suspected acute inflammatory sinus disease. Methods: We retrospectively evaluated 109 consecutive patients who underwent CT (Siemens SOMATOM Force, Erlangen, Germany) of the paranasal sinus with a new tin-filtered scan-protocol (Sn100 kV; tube current 35 mAs) using iterative reconstruction. Two readers independently assessed subjective image quality using a five-point Likert scale (1 = excellent, 5 = non-diagnostic). Inter-observer agreement was calculated and expressed as percentage of agreement. Noise was determined for calculation of signal-to-noise-ratio (SNR). Effective radiation dose (ED) was calculated from the dose-length-product (DLP). Results: All examinations showed diagnostic image quality regarding evaluation of inflammatory sinus disease. On average, subjective general image quality was rated moderate (= 3) with a percentage of agreement between the observers of 81%. The mean image noise was 14.3 HU. The calculated median SNR was 6.0 for intraorbital fat, and 3.6 for the vitreous body, respectively. The median DLP was 2.1 mGy*cm, resulting in a median ED of 0.012 mSv. Conclusions: Taking the study limitations into account, ultra-low-dose tin-filtered CT of the paranasal sinus at a tube voltage of 100 kV utilizing an iterative reconstruction algorithm provides for reliable exclusion of suspected acute inflammatory sinus disease in 100% of the cases. [ABSTRACT FROM AUTHOR]

Objective: To design and evaluate the accuracy of a novel navigation template suitable for posterior cervical screw placement surgery by using 3D printing technology to improve the existing guiding template design. Methods: The researchers (including spine surgeons and technicians) used CT to perform thin-slice scanning on 12 cases of normal upper cervical vertebral specimens and defined the screw channels that were completely located in the pedicle without penetrating the cortex as ideal screw channels, then designed the ideal channel of the upper cervical vertebral (atlantoaxial) pedicle screw by computer software which was regarded as the preset values, and recorded the screw entrance point, transverse angle and sagittal angle of the ideal channel. Then, researchers designed the novel navigation templates for placement pedicle screw according to the ideal screw channel preset values and manufactured them with one for every single vertebra by 3D printer. A senior spine surgeon performed the posterior surgery to implant pedicle screw on the specimens by the novel navigation templates, then performed CT thin-slice scanning on the specimens again after removing the screws, and reconstructed the actual screws channel by computer software, recorded the screw entrance point, transverse angle and sagittal angle of the actual channels which were defined as the actual values and evaluated them according to Kawaguchi’s pedicle screw evaluation standard finally. The differences between the preoperative preset values of ideal screw channel and the postoperative actual values of actual screw channel were compared by a nonparametric paired rank test. Results: 48 screws were placed on 12 cases of upper cervical vertebral specimens in total. It showed that the grade 0, I, II, III channels in this study were 47, 1, 0, 0, respectively. The grade 0 channels accounted for 97.92% of the total number of channels. There was no significant difference with regard to the screw entrance point, the transverse angle, and the sagittal angle between the preoperative preset values of ideal screw channels and the postoperative actual values of actual screw channels. Conclusion: To implant pedicle screw assisted with the novel individually navigation template designed by 3D printed in the posterior cervical surgery can improve accuracy of pedicle screw placement and safety of the surgery. [ABSTRACT FROM AUTHOR]

Looking for new opportunities in mechanical design, we are interested in studying the kinematic behaviour of biological joints. The real kinematic behaviour of the elbow of quadruped animals (which is submitted to high mechanical stresses in comparison with bipeds) remains unexplored. The sheep elbow joint was chosen because of its similarity with a revolute joint. The main objective of this study is to estimate the effects of elbow simplifications on the prediction of joint reaction forces in inverse dynamic simulations. Rigid motions between humerus and radius-ulna were registered during full flexion-extension gestures on five cadaveric specimens. The experiments were initially conducted with fresh specimens with ligaments and repeated after removal of all soft tissue, including cartilage. A digital image correlation system was used for tracking optical markers fixed on the bones. The geometry of the specimens was digitized using a 3D optical scanner. Then, the instantaneous helical axis of the joint was computed for each acquisition time. Finally, an OpenSim musculoskeletal model of the sheep forelimb was used to quantify effects of elbow joint approximations on the prediction of joint reaction forces. The motion analysis showed that only the medial-lateral translation is sufficiently large regarding the measuring uncertainty of the experiments. This translation assimilates the sheep elbow to a screw joint instead of a revolute joint. In comparison with fresh specimens, the experiments conducted with dry bone specimens (bones without soft tissue) provided different kinematic behaviour. From the results of our inverse dynamic simulations, it was noticed that the inclusion of the medial-lateral translation to the model made up with the mean flexion axis does not affect the predicted joint reaction forces. A geometrical difference between the axis of the best fitting cylinder and the mean flexion axis (derived from the motion analysis) of fresh specimens was highlighted. This geometrical difference impacts slightly the prediction of joint reactions. [ABSTRACT FROM AUTHOR]

Reports using computed tomography (CT) to estimate thigh skeletal muscle cross-sectional area and mean muscle attenuation are often difficult to evaluate due to inconsistent methods of quantification and/or poorly described analysis methods. This CT tutorial provides step-by-step instructions in using free, NIH Image J software to quantify both muscle size and composition in the mid-thigh, which was validated against a robust commercially available software, SliceOmatic. CT scans of the mid-thigh were analyzed from 101 healthy individuals aged 65 and older. Mean cross-sectional area and mean attenuation values are presented across seven defined Hounsfield unit (HU) ranges along with the percent contribution of each region to the total mid-thigh area. Inter-software correlation coefficients ranged from R2 = 0.92–0.99 for all specific area comparisons measured using the Image J method compared to SliceOmatic. We recommend reporting individual HU ranges for all areas measured. Although HU range 0–100 includes the majority of skeletal muscle area, HU range -29 to 150 appears to be the most inclusive for quantifying total thigh muscle. Reporting all HU ranges is necessary to determine the relative contribution of each, as they may be differentially affected by age, obesity, disease, and exercise. This standardized operating procedure will facilitate consistency among investigators reporting computed tomography characteristics of the thigh on single slice images. Trial Registration: ClinicalTrials.gov . [ABSTRACT FROM AUTHOR]

In this paper, we present a method for automated estimation of a human face given a skull remain. Our proposed method is based on three statistical models. A volumetric (tetrahedral) skull model encoding the variations of different skulls, a surface head model encoding the head variations, and a dense statistic of facial soft tissue thickness (FSTT). All data are automatically derived from computed tomography (CT) head scans and optical face scans. In order to obtain a proper dense FSTT statistic, we register a skull model to each skull extracted from a CT scan and determine the FSTT value for each vertex of the skull model towards the associated extracted skin surface. The FSTT values at predefined landmarks from our statistic are well in agreement with data from the literature. To recover a face from a skull remain, we first fit our skull model to the given skull. Next, we generate spheres with radius of the respective FSTT value obtained from our statistic at each vertex of the registered skull. Finally, we fit a head model to the union of all spheres. The proposed automated method enables a probabilistic face-estimation that facilitates forensic recovery even from incomplete skull remains. The FSTT statistic allows the generation of plausible head variants, which can be adjusted intuitively using principal component analysis. We validate our face recovery process using an anonymized head CT scan. The estimation generated from the given skull visually compares well with the skin surface extracted from the CT scan itself. [ABSTRACT FROM AUTHOR]

Pneumonia is one of the major causes of child mortality, yet with a timely diagnosis, it is usually curable with antibiotic therapy. In many developing regions, diagnosing pneumonia remains a challenge, due to shortages of medical resources. Lung ultrasound has proved to be a useful tool to detect lung consolidation as evidence of pneumonia. However, diagnosis of pneumonia by ultrasound has limitations: it is operator-dependent, and it needs to be carried out and interpreted by trained personnel. Pattern recognition and image analysis is a potential tool to enable automatic diagnosis of pneumonia consolidation without requiring an expert analyst. This paper presents a method for automatic classification of pneumonia using ultrasound imaging of the lungs and pattern recognition. The approach presented here is based on the analysis of brightness distribution patterns present in rectangular segments (here called “characteristic vectors“) from the ultrasound digital images. In a first step we identified and eliminated the skin and subcutaneous tissue (fat and muscle) in lung ultrasound frames, and the “characteristic vectors”were analyzed using standard neural networks using artificial intelligence methods. We analyzed 60 lung ultrasound frames corresponding to 21 children under age 5 years (15 children with confirmed pneumonia by clinical examination and X-rays, and 6 children with no pulmonary disease) from a hospital based population in Lima, Peru. Lung ultrasound images were obtained using an Ultrasonix ultrasound device. A total of 1450 positive (pneumonia) and 1605 negative (normal lung) vectors were analyzed with standard neural networks, and used to create an algorithm to differentiate lung infiltrates from healthy lung. A neural network was trained using the algorithm and it was able to correctly identify pneumonia infiltrates, with 90.9% sensitivity and 100% specificity. This approach may be used to develop operator-independent computer algorithms for pneumonia diagnosis using ultrasound in young children. [ABSTRACT FROM AUTHOR]

The oncologic risk of ionizing radiation is widely known. Sarcomas developing after radiotherapy have been reported, and they are a growing problem because rapid advancements in cancer management and screening have increased the number of long-term survivors. Although many patients have undergone radiation treatment in Asian countries, scarce reports on post-radiation sarcomas (PRSs) have been published. We investigated the feature and prognostic factors of PRSs in an Asian population. The Eastern Asian Musculoskeletal Oncology Group participated in this project. Cases obtained from 10 centers were retrospectively reviewed. Patients with genetic malignancy predisposition syndrome, or who had more than one type of malignancy before the development of secondary sarcoma were excluded. Forty-two high-grade sarcomas among a total of 43 PRSs were analyzed. There were 29 females and 13 males, with a median age of 58.5 years; 23 patients had bone tumors and 19 had soft tissue tumors. The most common primary lesion was breast cancer. The median latency period was 192 months. There were no differences in radiation dose, latency time, and survival rates between bone and soft tissue PRSs. The most common site and diagnosis were the pelvic area and osteosarcoma and malignant fibrous histiocytoma for bone and soft tissue PRSs. The median follow-up period was 25.5 months. Five-year metastasis-free and overall survival rates were 14.5% and 16.6%, and 39.1% and 49.6% for bone and soft tissue PRSs. Survival differences depending on initial metastasis and surgery were significant in soft tissue sarcomas. Although this study failed to find ethnic differences, it is the largest review on PRS in an Asian population. As early recognition through long-term surveillance is a key to optimal management, clinicians should take efforts to understand the real status of PRS. [ABSTRACT FROM AUTHOR]

This study investigates possible variation in post-mortem histories during the Neolithic period in southwestern Sweden based on microscopic studies of human bone. Numerous megalithic graves were built in this region and good preservation conditions have left a rich skeletal record. After more than a hundred years of research, it is still a controversy whether or not these skeletal assemblages were the result of primary burials, or ossuaries where skeletonized remains were deposited. In this study we apply histological analysis to obtain insights into post-mortem histories and taphonomic processes affecting the human remains, potentially including funerary rituals. This type of analysis records the condition and traces of degradation found in skeletal material at a microscopic level. Human skeletal material from four different megalithic tombs in the Falbygden area has been sampled and analysed by thin-section light microscopy, and by scanning electron microscopy. The results of the study provide evidence of variation and changes in burial conditions for skeletal remains from the different graves, also for remains from the same grave. Extent of bioerosion varied, from extensive to moderate/arrested, to none. Bone samples from the same graves also differed in the type of staining and mineral inclusions, showing that the non-bioeroded samples relatively early post-mortem must have experienced an anoxic environment, and later a change to an aerated environment. This could be taken as an indication of primary burial somewhere else, but more likely reflect a special micro-environment occurring temporarily in some graves and parts of graves after the tombs were filled with soil and sealed by roof slabs. The study illustrates the usefulness of bone histological analysis in the reconstruction of post-mortem histories, revealing variations not discernible at macro-level that may aid in the interpretations of funerary rituals. However, the results also highlight the issues of equifinality. Based on current data and knowledge, several scenarios are possible. Further histotaphonomic work is advisable, including archaeological remains from megalithic tombs, and bones from taphonomic experiments. [ABSTRACT FROM AUTHOR]

We determined the effects of wearing an above-knee compression garment (CG) on knee joint position sense. Healthy young adults (n = 24, age = 27.46 ± 4.65 years) performed a passive knee position-matching task on an isokinetic dynamometer with each leg separately. We determined the magnitude of compression by measuring anatomical thigh cross sectional area (CSA) in standing using magnetic resonance imaging. Wearing the CG compressed CSA by 2% (t = 2.91, p = 0.010, Cohen’s d = 0.68). Repeated measures ANOVA (rANOVA) with three repetition factors (condition: CG, no CG; leg: right dominant, left non-dominant; and target angles: 30°, 45°, 60°) revealed an effect of angles (p < 0.001), where the matching of knee joint position was more accurate at 60° compared to 30° and 45° (p < 0.001). However, CG did not reduce passive joint position sense errors. In fact, joint position error was less without CG (p = 0.014). In conclusion, while CG does compress the thigh it does not afford the purported benefits for proprioception as measured by a target-matching task in the present study. [ABSTRACT FROM AUTHOR]

The majority of hip fractures have been reported to occur as a result of a fall with impact to the greater trochanter of the femur. Recently, we developed a novel cadaveric pendulum-based hip impact model and tested two cadaveric femur-pelvis constructs, embedded in a soft tissue surrogate. The outcome was a femoral neck fracture in a male specimen while a female specimen had no fracture. The aim of the present study was, first, to develop a methodology for constructing and assessing the accuracy of explicit Finite Element Models (FEMs) for simulation of sideways falls to the hip based on the experimental model. Second, to use the FEMs for quantifying the internal reaction forces and energy absorption in the hip during impact. Third, to assess the potential of the FEMs in terms of separating a femoral fracture endpoint from a non-fracture endpoint. Using a non-linear, strain rate dependent, and heterogeneous material mapping strategy for bone tissue in these models, we found the FEM-derived results to closely match the experimental test results in terms of impact forces and displacements of pelvic video markers up to the time of peak impact force with errors below 10%. We found the internal reaction forces in the femoral neck on the impact side to be approximately 35% lower than the impact force measured between soft tissue and ground for both specimens. In addition, we found the soft tissue to be the component that absorbed the largest part of the energy of the tissue types in the hip region. Finally, we found surface strain patterns derived from FEM results to match the fracture location and extent based on post testing x-rays of the specimens. This is the first study with quantitative data on the energy absorption in the pelvic region during a sideways fall. [ABSTRACT FROM AUTHOR]

In recent years, bimaxillary rotation advancement (BRA) has become the method of choice for surgical treatment of obstructive sleep apnea (OSA). As dislocation of the jaw bones affects both, airways and facial contours, surgeons are facing the challenge of finding an optimal jaw position that allows for the reestablishment of normal airway ventilation and esthetic surgical outcome. Owing to the complexity of the facial anatomy and its mechanical behavior, individual planning of surgical OSA treatment under consideration of functional and esthetic aspects presents a challenge that surgeons typically approach in a non-quantitative manner using subjective evaluation and clinical experience. This paper describes a framework for individual planning of OSA treatment using bimaxillary rotation advancement, which relies on computational modeling of hard and soft tissue mechanics. The described framework for simulation of functional and esthetic post-surgery outcome was used in 10 OSA patients. Comparison of the simulation results with post-surgery data reveals that biomechanical simulation provides a reliable estimate for post-surgery facial tissue behavior and antero-posterior airway extension, but fails to accurately describe a surprisingly large lateral stretch of the velopharyngeal region. This discrepancy is traced back to anisotropic effects of pharyngeal muscles. Possible approaches to improving the accuracy of model predictions and defining sharp criteria for optimizing combined OSA planning are discussed. [ABSTRACT FROM AUTHOR]

Background: This study aimed to provide an overview of device-related complications occurring in individuals with an upper or lower extremity amputation treated with a screw, press-fit or other type of bone-anchored implant as well as interventions related to these complications. Method: A systematic literature search was conducted in the MEDLINE, Cochrane, EMBASE, CINAHL and Web of Science databases. The included studies reported on device-related complications and interventions occurring in individuals with bone-anchored prostheses. The outcomes evaluated were death, infection, bone/device breakage, implant loosening, soft tissue complications, systemic events, antibiotic and surgical treatment. Subgroup analyses were performed for the following groups: a) implant type (screw, press-fit and other types of implants) and b) level of amputation (transfemoral, transtibial and upper extremity amputation). Results: Of 309 studies, 12 cohort studies were eligible for inclusion, all of which had methodological shortcomings and 12 studies were excluded due to complete overlap of patient data. Implant infection were rare in certain transfemoral implants (screw: 2–11%, press-fit: 0–3%, Compress: 0%) but common in transtibial implants (29%). The same was observed for implant loosening, in transfemoral (screw: 6%, press-fit: 0–3%, Compress: 0%), transtibial implants (29%) as well as for upper extremity implants (13–23%). Intramedullary device breakage were rare in transfemoral implants (screw: 0%, press-fit: 1%, Compress: unknown) but frequent in individuals with transradial implants (27%) and absent in transtibial implants. Soft tissue infections and complications were common and underreported in most articles. Conclusions: Major complications (e.g. implant infection, implant loosening and intramedullary device breakage) are rare in transfemoral bone-anchored prosthesis and seem to occur less frequently in individuals with press-fit implants. Minor complications, such as soft tissue infections and complications, are common but are substantially influenced by the learning curve, implant design and surgical technique. Data for patients treated with a transtibial, upper extremity or Compress implant are underreported, precluding definitive conclusions. There is a need for either an international database to report on or a standard core set of complications as well as the need to follow classification systems that result in unequivocal data. [ABSTRACT FROM AUTHOR]

Both deep understanding and reliable prediction of postoperative soft tissue changes are crucial for planning orthognathic surgery. Instead of estimating soft tissue responses by measuring individual landmark changes, this study aimed to investigate the relationship (ratio) between soft and hard tissue movements in different facial regions through three-dimensional cone-beam computed tomography (CBCT). Preoperative and postoperative CBCT images were superimposed using the surface registration method on the basis of the cranial base, and 10 facial regions of interest were defined. Region-based volumetric subtractions between the preoperative and postoperative segments were performed. The volumetric differences and surface of each region were used to estimate the average movement. Correlation and regression analyses were performed to examine the relationships between the corresponding soft and hard tissue movements. An overall pattern of facial soft tissue movement was observed in patients with prognathism who underwent orthognathic surgery. The experiment results have shown that mean ratios for the average soft-to-hard tissue movements in the facial regions varied, which may not exactly be similar to the published reports because of the population biocharacteristics and study methods, but the trend is in agreement with the previous studies. Additionally, the prediction capability of the regression model was significantly high, ranging from 0.786 to 0.857, in upper lip, upper vermilion, and chin regions, thus demonstrating that the skin outline changes in these critical regions could be reliably predicted from the underlying bone movements. These results could likely be applied in future soft tissue simulation in orthognathic surgery. [ABSTRACT FROM AUTHOR]

Falls to the side are the leading cause of hip fractures in the elderly. The load that a person experiences during a fall cannot be measured with volunteers for ethical reasons. To evaluate injurious loads, while considering relevant energy input and body posture for a sideways fall, a subject-specific cadaveric impact experiment was developed. Full cadaveric femur-pelvis constructs (N = 2) were embedded in surrogate soft tissue material and attached to metallic surrogate lower limbs. The specimens were then subjected to an inverted pendulum motion, simulating a fall to the side with an impact to the greater trochanter. The load at the ground and the deformation of the pelvis were evaluated using a 6-axis force transducer and two high-speed cameras. Post-test, a trauma surgeon (PG) evaluated specimen injuries. Peak ground contact forces were 7132 N and 5641 N for the fractured and non-fractured specimen, respectively. We observed a cervical fracture of the femur in one specimen and no injuries in a second specimen, showing that the developed protocol can be used to differentiate between specimens at high and low fracture risk. [ABSTRACT FROM AUTHOR]

Objective: The dual-energy CT (DECT) algorithm for urate detection is feasible only if hyperdense deposits are present. Based on our experience, around half of the performed DECT examinations show no such deposits and thus were useless for this indication. Our diagnostic accuracy study investigates whether conventional radiographs can serve as gatekeeper test prior to DECT for reliable exclusion of such radiopaque deposits. Materials and methods: In this retrospective study, 77 clinically indicated DECT examinations of the hand (n = 29), foot (n = 36) and ankle (n = 12) of 55 patients (13 female, mean age 62±15 years) with suspected gouty arthritis were included. Two blinded readers independently evaluated DECT, gray-scale CT images (reference standard) and corresponding standardized radiographs for the presence/location of dense soft tissue deposits. Results: Interreader agreement for detection of soft tissue deposits with DECT and radiographs was excellent (DECT: both readers, κ = 1; radiographs: both readers, κ = 0.94). DECT showed soft tissue deposits in 54/77 DECT (70%) scans. 30/54 scans (56%) showed deposits on the corresponding radiographs, while in 24 scans (44%) no deposits were seen on radiographs. Test performance of radiographs for soft tissue deposit detection: sensitivity 56%, specificity 100%, PPV 100%, NPV 48.9%, and accuracy 69%. Low density of the deposits was the main reasons for false-negative radiographs (19 cases, 79%), followed by superimposition of deposits by osseous structures (5 cases, 21%). Conclusion: Conventional radiographs of the hand, foot and ankle cannot serve as a gatekeeper test for reliable exclusion of radiopaque soft tissue deposits prior to DECT. [ABSTRACT FROM AUTHOR]

Background and purpose: The most common and gold standard method to diagnose and follow-up on scoliosis treatment is to capture biplanar X-ray images and then use these to determine the sagittal frontal spinal curvature angles by the Cobb method. Reducing exposure to radiation is an important aspect for consideration, especially regarding children. The ZEBRIS spinal examination method is an external, non-invasive measurement method that uses an ultrasound-based motion analysis system. The aim of this study is to compare angle values of patients with adolescent idiopathic scoliosis (AIS) determined by the ZEBRIS spine examination method with the angle values defined by the gold standard Cobb method on biplanar X-ray images. Methods: Subjects included 19 children with AIS (mean age 14.5±2.1 years, range 8–16 years, frontal plane thoracic Cobb angle 19.95±10.23°, thoracolumbar/lumbar angle 16.57±10.23°). The thoracic kyphosis and lumbar lordosis in the sagittal plane and the thoracic and lumbar scoliosis values were calculated by the Cobb method on biplanar X-ray images. The sagittal frontal spinal curvature angles were calculated from the position of the processus spinosus of 19 vertebrae, as determined by the ZEBRIS spine examination method. The validity of the ZEBRIS spine examination method was evaluated with Bland-Altman analyses between the sagittal and frontal spinal curvature parameters calculated from data determined by the ZEBRIS spine examination method and data obtained by the Cobb method on the X-ray images. Results and discussion: Thoracic spinal curvature angles in sagittal and in frontal planes can be measured with sufficient accuracy. The slopes of the linear regression lines for thoracic kyphosis (TK) and thoracic scoliosis (TSC) are close to one (1.00 and 0.79 respectively), and the intercept values are below 5 degrees. The correlation between the TK and TSC values determined by the two methods is significant (p = 0.000) and excellent (rTK = 0.95, rTSC = 0.85). The differences are in the limit of agreement. The lumbar lordosis (LL) in the sagittal plane shows a very good correlation (rLL = 0.76); however the differences between the angles determined by the two methods are out of the limit of agreement in patients with major lumbar lordosis (LL≥50°). The thoracolumbar/lumbar spinal curvature angles in the frontal plane determined by ZEBRIS spine examination were underestimated at curvatures larger than 15°, mainly due to the rotational and pathological deformities of the scoliotic vertebrae. However, the correlation between lumbar scoliosis (LSC) values determined by the two methods is significant (p = 0.000) and excellent (rLSC = 0.84), the slopes are below one (0.71), the intercept values are below 5 degrees, and the differences between the angles determined by the two methods are within the limits of agreement. We could conclude that ZEBRIS spinal examination is a valid and reliable method for determination of sagittal and frontal curvatures during the treatment of patients with scoliosis. However, it cannot replace the biplanar X-ray examination for the visualization of spinal curvatures in the sagittal and frontal planes and the rotation of vertebral bodies during the diagnosis and annual evaluation of the progression. [ABSTRACT FROM AUTHOR]

Purpose: The incidence of recurrent infections in patients following one or two stage revision for infected megaprostheses after resection of bone tumours was investigated. The difference between retaining at least one well fixed stem and a complete removal of the megaprosthesis during a two stage revision was also analysed. Methods: 627 patients who experienced a replacement of a musculoskeletal tumour by megaprostheses were recorded. An infection occurred in 83 of 621 patients available for follow-up. 61 patients underwent one stage revision, and 16 patients two stage revision for the first revision surgery. In the entire study period, two stage revision was performed 32 times (first, second, and third revision). Results: The cumulative incidence analysis showed a reinfection probability after one stage revision of 18% at one year, 30% at two years, 39% at five years, 46% at ten years, and 56% at 15 years. After two stage revision, a reinfection probability of 28% at two years, and 48% at five years was calculated. Cumulative incidence curves did not differ significantly (Gray’s test; p = 0.51) between one and two stage revision (with and without complete removal of the stems). In two stage revision (n = 32), a statistically significant difference in infection rates between patients treated with complete removal of the megaprosthesis (n = 18) including anchorage stems and patients with at least one retained stem (n = 14) was shown (Fisher’s exact test, p = 0.029). Conclusion: Two stage revisions with complete removal of the megaprosthesis showed the best results among limb salvage procedures for the treatment of infected megaprosthesis. [ABSTRACT FROM AUTHOR]

Immediately following a fracture, a fibrin laden hematoma is formed to prevent bleeding and infection. Subsequently, the organized removal of fibrin, via the protease plasmin, is essential to permit fracture repair through angiogenesis and ossification. Yet, when plasmin activity is lost, the depletion of fibrin alone is insufficient to fully restore fracture repair, suggesting the existence of additional plasmin targets important for fracture repair. Previously, activated matrix metalloproteinase 9 (MMP-9) was demonstrated to function in fracture repair by promoting angiogenesis. Given that MMP-9 is a defined plasmin target, it was hypothesized that pro-MMP-9, following plasmin activation, promotes fracture repair. This hypothesis was tested in a fixed murine femur fracture model with serial assessment of fracture healing. Contrary to previous findings, a complete loss of MMP-9 failed to affect fracture healing and union through 28 days post injury. Therefore, these results demonstrated that MMP-9 is dispensable for timely fracture union and cartilage transition to bone in fixed femur fractures. Pro-MMP-9 is therefore not a significant target of plasmin in fracture repair and future studies assessing additional plasmin targets associated with angiogenesis are warranted. [ABSTRACT FROM AUTHOR]

Background: Achieving proper rotational alignment of the femoral component in total knee arthroplasty (TKA) for valgus knee is challenging because of lateral condylar hypoplasia and lateral cartilage erosion. Gap-based navigation-assisted TKA enables surgeons to determine the angle of femoral component rotation (FCR) based on the posterior condylar axis. This study evaluated the possible factors that affect the rotational alignment of the femoral component based on the posterior condylar axis. Materials and methods: Between 2008 and 2016, 28 knees were enrolled. The dependent variable for this study was FCR based on the posterior condylar axis, which was obtained from the navigation system archives. Multiple regression analysis was conducted to identify factors that might predict FCR, including body mass index (BMI), Kellgren-Lawrence grade (K-L grade), lateral distal femoral angles obtained from the navigation system and radiographs (NaviLDFA, XrayLDFA), hip-knee-ankle (HKA) axis, lateral gap under varus stress (LGVS), medial gap under valgus stress (MGVS), and side-to-side difference (STSD, MGVS − LGVS). Results: The mean FCR was 6.1° ± 2.0°. Of all the potentially predictive factors evaluated in this study, only NaviLDFA (β = −0.668) and XrayLDFA (β = −0.714) predicted significantly FCR. Conclusions: The LDFAs, as determined using radiographs and the navigation system, were both predictive of the rotational alignment of the femoral component based on the posterior condylar axis in gap-based TKA for valgus knee. A 1° increment with NaviLDFA led to a 0.668° decrement in FCR, and a 1° increment with XrayLDFA led to a 0.714° decrement. This suggests that symmetrical lateral condylar hypoplasia of the posterior and distal side occurs in lateral compartment end-stage osteoarthritis with valgus deformity. [ABSTRACT FROM AUTHOR]

Background: Titanium (Ti)-6Al-4V alloy, which is widely used in spinal instrumentation with a pedicle screw (PS) system. However, significant clinical problems, including loosening and back-out of PSs, persist. During the last decade, a novel technology that produces bioactive Ti from chemical and heat treatments has been reported that induces the spontaneous formation of a hydroxyapatite (HA) layer on the surface of Ti materials. The purpose of this study was to study the effect of bioactivation of Ti-6Al-4V PSs on the ability of HA formation in vitro and its biocompatibility and bone-bonding ability in vivo. Methods: Ti-6V-4Al alloy PSs were prepared and bioactivated by NaOH-CaCl2-heat-water treatments. The HA-forming ability of bioactive PSs in simulated body fluid (SBF) was evaluated by field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray analysis (EDX). Six 11-month-old female beagle dogs were used for the in vivo study. Bioactive and control (without bioactivation) PSs were left and right randomly placed from L1 to L6. One and three months after surgery, lumbar spines were removed for biomechanical and histological analyses. Results: In vitro: The surface analysis of bioactive PSs by FE-SEM and EDX showed substantial HA deposits over the entire surface. In vivo: The mean extraction torque was significantly higher for bioactive PSs compared to controls PSs (P<0.01); there was no significant difference in pull-out strength between control and bioactive PSs. Histologically, the contact area between bone tissue and screw surface showed no significant trend to be greater in bioactive PSs compared to control PSs (P = 0.06). Conclusions: Bioactive PSs prepared by chemical and heat treatments formed layers of HA on the surface of screws in vitro that improved biocompatibility and bonding ability with bone in vivo. Bioactive PSs may reduce screw loosening to overcome the obstacles confronted in spinal instrumentation surgery. [ABSTRACT FROM AUTHOR]

Objective: Joint fibrosis affects many synovial joints (including hip, knee and shoulder) causing stiffness and pain. The mechanism of joint fibrosis remains unknown, although genetic factors may contribute. Defects in maintenance of telomere length resulting from impaired telomere repair have been shown to cause lung and liver fibrotic disease. Here we tested the hypothesis that joint fibrosis and other soft tissue fibrotic conditions are also associated with telomere length. Patients and methods: 5,200 participants in the TwinsUK registry had data on telomere length (measured by qPCR) and the traits of interest (hip and knee stiffness, total joint replacement (TJR, hip or knee) and fibrotic conditions (Dupuytren’s disease, frozen shoulder). Results: Multivariable logistic regression analyses showed a significant association between telomere length and fibrotic conditions (hip stiffness, knee stiffness and frozen shoulder, p = ≤0.002) even after taking age into account. No association was found between TJR and telomere length. Conclusion: These findings suggest that defects in telomere repair contribute to joint fibrosis, and that fibrosis shares a common mechanistic pathway in different organs. Therapeutic strategies to combat telomere shortening may offer novel treatments for fibrotic joint disease. [ABSTRACT FROM AUTHOR]

Iatrogenic nerve injury during fracture surgery of the upper arm is a well-known complication. Prevention of this type of injuries would be of great value. The literature describes several methods to reduce this type of injury, but no perfect solution is at hand. In this study we introduce a new radiographic evaluation of the course and variation of the radial nerve in the distal part of the humerus in relation to bony landmarks as observed on a plain (trauma) radiographs. Aim of this new approach is to reduce the chance of iatrogenic nerve injury by defining of a danger zone in the distal upper arm regarding the radial nerve and hence give an advise for future implant fabrication. Methods and findings: Measurements were done on both arms of ten specially embalmed specimens. Arms were dissected and radiopaque wires attached to the radial nerve in the distal part of the upper arm. Digital radiographs were obtained to determine the course of the radial nerve in the distal 20 cm of the humerus in relation to bony landmarks; medial epicondyle and capitellum-trochlea projection (CCT). Analysis was done with ImageJ and Microsoft Excel software. We also compared humeral nail specifications from different companies with the course of the radial nerve to predict possible radial nerve damage. Results: The distance from the medial epicondyle to point where the radial nerve bends from posterior to lateral was 142 mm on AP radiographs and 152 mm measured on the lateral radiographs. The average distance from the medial epicondyle to point where the radial nerve bends from lateral to anterior on AP radiographs was 66 mm. On the lateral radiographs where the nerve moves away from the anterior cortex 83 mm to the center of capitellum and trochlea (CCT). The distance from the bifurcation of the radial nerve into the posterior interosseous nerve (PIN) and superficial radial nerve was 21 mm on AP radiographs and 42 mm on the lateral radiographs (CCT). Conclusions: The course of the radial nerve in the distal part of the upper arm has great variety. Lateral fixation is relatively safe in a zone between the center of capitellum-trochlea and 48 mm proximal to this point. The danger zone in lateral fixation is in-between 48–122 mm proximal from CCT. In anteroposterior direction; distal fixation is dangerous between 21–101 mm measured from the medial epicondyle. The more distal, the more medial the nerve courses making it more valuable to iatrogenic damage. The IMN we compared with our data all show potential risk in case of (blind) distal locking, especially from lateral to medial direction. [ABSTRACT FROM AUTHOR]

One of the most important factors in successful upper limb prostheses is the socket design. Sockets must be individually fabricated to arrive at a geometry that suits the user’s morphology and appropriately distributes the pressures associated with prosthetic use across the residual limb. In higher levels of amputation, such as transhumeral, this challenge is amplified as prosthetic weight and the physical demands placed on the residual limb are heightened. Yet, in the upper limb, socket fabrication is largely driven by heuristic practices. An analytical understanding of the interactions between the socket and residual limb is absent in literature. This work describes techniques, adapted from lower limb prosthetic research, to empirically characterize the pressure distribution occurring between the residual limb and well-fit transhumeral prosthetic sockets. A case series analyzing the result of four participants with transhumeral amputation is presented. A Tekscan VersaTek pressure measurement system and FaroArm Edge coordinate measurement machine were employed to capture socket-residual limb interface pressures and geometrically register these values to the anatomy of participants. Participants performed two static poses with their prosthesis under two separate loading conditions. Surface pressure maps were constructed from the data, highlighting pressure distribution patterns, anatomical locations bearing maximum pressure, and the relative pressure magnitudes. Pressure distribution patterns demonstrated unique characteristics across the four participants that could be traced to individual socket design considerations. This work presents a technique that implements commercially available tools to quantitatively characterize upper limb socket-residual limb interactions. This is a fundamental first step toward improved socket designs developed through informed, analytically-based design tools. [ABSTRACT FROM AUTHOR]

Objectives: To evaluate and compare surface doses of a cone beam computed tomography (CBCT) and a multidetector computed tomography (MDCT) device in pediatric ankle and wrist phantoms. Methods: Thermoluminescent dosimeters (TLD) were used to measure and compare surface doses between CBCT and MDCT in a left ankle and a right wrist pediatric phantom. In both modalities adapted pediatric dose protocols were utilized to achieve realistic imaging conditions. All measurements were repeated three times to prove test-retest reliability. Additionally, objective and subjective image quality parameters were assessed. Results: Average surface doses were 3.8 ±2.1 mGy for the ankle, and 2.2 ±1.3 mGy for the wrist in CBCT. The corresponding surface doses in optimized MDCT were 4.5 ±1.3 mGy for the ankle, and 3.4 ±0.7 mGy for the wrist. Overall, mean surface dose was significantly lower in CBCT (3.0 ±1.9 mGy vs. 3.9 ±1.2 mGy, p<0.001). Subjectively rated general image quality was not significantly different between the study protocols (p = 0.421), whereas objectively measured image quality parameters were in favor of CBCT (p<0.001). Conclusions: Adapted extremity CBCT imaging protocols have the potential to fall below optimized pediatric ankle and wrist MDCT doses at comparable image qualities. These possible dose savings warrant further development and research in pediatric extremity CBCT applications. [ABSTRACT FROM AUTHOR]

The article presents two case studies of a previously healthy 41-year-old man and A 21-year-old Eritrean migrant presented with progressive pain and swelling on forefoot. Topics include suffering from neglected tropical disease, Eumycetoma characterized by chronic progressive local inflammation of subcutaneous tissues with purulent discharge and sinus formation, resected mass surrounded by a pseudocapsule and Madurella mycetomatis (M. mycetomatis) as most prevalent causative agent.

Objective: In this study, an Inca bundle was examined using computed tomography (CT). The primary aim was to determine the preservation status of bony and soft tissues, the sex, the age at the time of death, possible indicators for disease or even the cause of death, as well as the kind of mummification. A secondary aim was to obtain a brief overview of the wrapping in order to gain additional information on the cultural background. Materials and methods: The bundle belongs to the Museum of Cultures in Basel, Switzerland, and was bought in Munich, Germany, in 1921. Radiocarbon dating of the superficial textile yielded a calibrated age between 1480 and 1650 AD. The mummy was investigated using multi-slice CT with slice thickness of 0.75 mm and 110 kilovolt. For standardized assessment of soft tissue preservation, a recently developed checklist was applied. Results: CT revealed the mummy of a seven to nine year old boy with superior preservation of bony and soft tissues allowing detailed assessment. Indicators of neurofibromatosis type 1 (paravertebral and cutaneous neurofibromas, a breast neurofibroma, sphenoid wing dysplasia), Chagas disease (dilatation of the esophagus, stomach, rectum, and large amounts of feces), and lung infection (pleural adherence, calcifications), probably due to tuberculosis, were found. Furthermore, signs of peri-mortem violence (transection of the chest and a defect in the abdominal wall) were detected. CT images revealed a carefully performed wrapping. Conclusion: CT examination of the Inca bundle proved to be an important non-destructive examination method. Standardized assessment, especially of the soft tissue structures, allowed for diagnoses of several diseases, indicating a multi-morbid child at the time of death. The careful wrapping pointed to a ceremonial burial. Within the cultural background, the signs of fatal violence were discussed as a possible result of war, murder, accident, or human sacrifice. [ABSTRACT FROM AUTHOR]

Here we present a new species of placoderm fish, Africanaspis edmountaini sp. nov., and redescribe Africanaspis doryssa on the basis of new material collected from the type locality of Africanaspis. The new material includes the first head shields of Africanaspis doryssa in addition to soft anatomy for both taxa. Hitherto Africanaspis was entirely described from trunk armour and no record of body and fin outlines had been recorded. In addition the first record of embryonic and juvenile specimens of Africanaspis doryssa is presented and provides a growth series from presumed hatchlings to presumed adults. The presence of a greater number of juveniles compared to adults indicates that the Waterloo Farm fossil site in South Africa represents the first nursery site of arthrodire placoderms known from a cold water environment. The preservation of an ontogenetic series demonstrates that variation within the earlier known sample, initially considered to have resulted from ontogenetic change, instead indicates the presence of a second, less common species Africanaspis edmountaini sp. nov. There is some faunal overlap between the Waterloo Farm fossil site and faunas described from Strud in Belgium and Red Hill, Pennsylvania, in north America, supporting the concept of a more cosmopolitan vertebrate fauna in the Famennian than earlier in the Devonian. [ABSTRACT FROM AUTHOR]

Computed tomography (CT) has become more readily available for post-mortem examination, offering an alternative to cetacean cranial measurements obtained manually. Measurement error may result in possible variation in cranial morphometric analysis. This study aimed to evaluate the accuracy and reliability of cetacean cranial measurements obtained by CT three-dimensional volume rendered images (3DVRI). CT scans of 9 stranded cetaceans were performed. The acquired images were reconstructed using bone reconstruction algorithms. The reconstructed crania obtained by 3DVRI were visualized after excluding other body structures. Accuracy of cranial measurements obtained by CT 3DVRI was evaluated by comparing with that obtained by manual approach as standard of reference. Reproducibility and repeatability of cranial measurements obtained by CT 3DVRI were evaluated using intraclass correlation coefficient (ICC). The results demonstrated that cranial measurements obtained by CT 3DVRI yielded high accuracy (88.05%– 99.64%). High reproducibility (ICC ranged from 0.897 to 1.000) and repeatability (ICC ranged from 0.919 to 1.000 for operator 1 and ICC range from 0.768 to 1.000 for operator 2) were observed in cranial measurements obtained by CT 3DVRI. Therefore, cranial measurements obtained by CT 3DVRI could be considered as virtual alternative to conventional manual approach. This may help the development of a normative reference for current cranial maturity and discriminant analysis studies in cetaceans. [ABSTRACT FROM AUTHOR]

Objectives: To assess feasibility of the harmonic Osteovue blade (HOB) for use in the soft tissue approach for dogs undergoing hemilaminectomy and to compare outcomes between dogs undergoing HOB or traditional approach (TRAD). Methods: A prospective randomized clinical trial was performed using 20 client-owned dogs with thoracolumbar intervertebral disk extrusion requiring hemilaminectomy. Dogs were randomly assigned to HOB or TRAD. Neurologic function and pain scores were assessed pre-operatively. Intraoperative blood loss and surgical approach time as well as postoperative pain and wound healing scores were recorded. Additionally, neurologic recovery and owner perceived quality of life were recorded at day 10 and 30 postoperative. Results: There was no significant difference in sex distribution, weight, age, preoperative neurological grade and pain score, and perioperative outcome measures between groups. Intraoperative total blood loss was minimal for HOB and TRAD (median: 0 ml (range 0–9) and 2.2 ml (range 0–6.8), respectively; p = 0.165) and approach times were similar (median: 7 min (range 5–12) and 8 min (range 5–13), respectively; p = 0.315). While changes in wound healing scores were similar, changes in postoperative pain scores and neurological function were significantly improved in the HOB compared to the TRAD group. Postoperative complications in the HOB group consisted of automutilation of part of the incision and development of a small soft, non-painful subcutaneous swelling in 1 dog each. Conclusions: The HOB is a safe and effective tool for the soft tissue approach for routine spinal surgery in dogs and is associated with decreased pain and increased neurological function post-surgery. [ABSTRACT FROM AUTHOR]

Background: Arthrodesis of the medial column (navicular, cuneiform I and metatarsal I) is performed for reasons such as Charcot arthropathy, arthritis, posttraumatic reconstruction or severe pes planus. However, the complication rate is still high and mainly resulting from inadequate fixation. Special plates, designed for medial column arthrodesis, seem to offer potential to reduce the complication rate. The aim of this study was to investigate biomechanically plantar and dorsomedial fusion of the medial column using two new plating systems. Methods: Eight matched pairs of human cadaveric lower legs were randomized in two groups and medial column fusion was performed using either plantar or dorsomedial variable-angle locking compression plates. The specimens were biomechanically tested under cyclic progressively increasing axial loading with physiological profile of each cycle. In addition to the machine data, mediolateral x-rays were taken every 250 cycles and motion tracking was performed to determine movements at the arthrodesis site. Statistical analysis of the parameters of interest was performed at a level of significance p = 0.05. Results: Displacement of the talo-navicular joint after 1000, 2000 and 4000 cycles was significantly lower for plantar plating (p≤0.039) while there was significantly less movement in the naviculo-cuneiform I joint for dorsal plating post these cycle numbers (p<0.001). Displacements in all three joints of the medial column, as well as angular and torsional deformations between the navicular and metatarsal I increased significantly for each plating technique between 1000, 2000 and 4000 cycles (p≤0.021). The two plating systems did not differ significantly with regard to stiffness and cycles to failure (p≥0.171). Conclusion: From biomechanical point of view, although dorsomedial plating showed less movement than plantar plating in the current setup under dynamic loading, there was no significant difference between the two plating systems with regard to stiffness and cycles to failure. Both tested techniques for dorsomedial and plantar plating appear to be applicable for arthrodesis of the medial column of the foot and other considerations, such as access morbidity, associated deformities or surgeon's preference, may also guide the choice of plating pattern. Further clinical studies are necessary before definitive recommendations can be given. [ABSTRACT FROM AUTHOR]

Purpose: Facial crestal bone level and dimension determine function and esthetics of dentition and dental implants. We have previously demonstrated that ultrasound can identify bony and soft tissue structures in the oral cavity. The aim of this study is to evaluate the accuracy of using ultrasound to measure facial crestal bone level and thickness. Materials and methods: A commercially available medical ultrasound scanner, paired with a 14 MHz imaging probe was used to scan dental and periodontal tissues at the mid-facial site of each tooth on 6 fresh cadavers. The alveolar crest level in relation to the cemento-enamel junction and its thickness on ultrasound images were measured and compared to those on cone-beam computed tomography (CBCT) scans and/or direct measurements on a total of 144 teeth. Results: The mean crestal bone level measured by means of ultrasound, CBCT and direct measures was 2.66 ± 0.86 mm, 2.51 ± 0.82 mm, and 2.71 ± 1.04 mm, respectively. The mean crestal bone thickness was 0.71 ± 0.44 mm and 0.74 ± 0.34 mm, measured by means of ultrasound and CBCT, respectively. The correlations of the ultrasound readings to the other two methods were between 0.78 and 0.88. The mean absolute differences in crestal bone height and thickness between ultrasound and CBCT were 0.09 mm (-1.20 to 1.00 mm, p = 0.06) and 0.03 mm (-0.48 to 0.54 mm, p = 0.03), respectively. Conclusion: Ultrasound was as accurate in determining alveolar bone level and its thickness as CBCT and direct measurements. Clinical trials will be required to further validate this non-ionizing and non-invasive method for determining facial crestal bone position and dimension. [ABSTRACT FROM AUTHOR]

This study examined the validity of a practical evaluation method for pitting edema by comparing it to other methods, including circumference measurements and ultrasound image measurements. Fifty-one patients (102 legs) from a convalescent ward in Maruyama Hospital were recruited for study 1, and 47 patients (94 legs) from a convalescent ward in Morinaga Hospital were recruited for study 2. The relationship between the depth of the surface imprint and circumferential measurements, as well as the relationship between the depth of the surface imprint and the thickness of the subcutaneous soft tissue on an ultrasonogram, were analyzed using a Spearman correlation coefficient by rank. There was no significant relationship between the surface imprint depth and circumferential measurements. However, there was a significant relationship between the depth of the surface imprint and the thickness of the subcutaneous soft tissue as measured on an ultrasonogram (correlation coefficient 0.736). Our findings suggest that our novel evaluation method for pitting edema, based on a measurement of the surface imprint depth, is both valid and useful. [ABSTRACT FROM AUTHOR]

In this paper we report the discovery of non-plumage soft tissues in Confuciusornis, a basal beaked bird from the Early Cretaceous Jehol Biota in northeastern China. Various soft tissues are visualized and interpreted through the use of laser-stimulated fluorescence, providing much novel anatomical information about this early bird, specifically reticulate scales covering the feet, and the well-developed and robust pro- and postpatagium. We also include a direct comparison between the forelimb soft tissues of Confuciusornis and modern avian patagia. Furthermore, apparently large, fleshy phalangeal pads are preserved on the feet. The reticulate scales, robust phalangeal pads as well as the highly recurved pedal claws strongly support Confuciusornis as an arboreal bird. Reticulate scales are more rounded than scutate scales and do not overlap, thus allowing for more flexibility in the toe. The extent of the pro- and postpatagium and the robust primary feather rachises are evidence that Confuciusornis was capable of powered flight, contrary to previous reports suggesting otherwise. A unique avian wing shape is also reconstructed based on plumage preserved. These soft tissues combined indicate an arboreal bird with the capacity for short-term (non-migratory) flight, and suggest that, although primitive, Confuciusornis already possessed many relatively advanced avian anatomical characteristics. [ABSTRACT FROM AUTHOR]

Objective: The purpose of this study is to determine the correlation between non-technical risk factors and the perioperative flap survival rate and to evaluate the choice of skin flap for the reconstruction of foot and ankle. Methods: This was a clinical retrospective study. Nine variables were identified. The Kaplan-Meier method coupled with a log-rank test and a Cox regression model was used to predict the risk factors that influence the perioperative flap survival rate. The relationship between postoperative wound infection and risk factors was also analyzed using a logistic regression model. Results: The overall flap survival rate was 85.42%. The necrosis rates of free flaps and pedicled flaps were 5.26% and 20.69%, respectively. According to the Cox regression model, flap type (hazard ratio [HR] = 2.592; 95% confidence interval [CI] (1.606, 4.184); P < 0.001) and postoperative wound infection (HR = 0.266; 95% CI (0.134, 0.529); P < 0.001) were found to be statistically significant risk factors associated with flap necrosis. Based on the logistic regression model, preoperative wound bed inflammation (odds ratio [OR] = 11.371,95% CI (3.117, 41.478), P < 0.001) was a statistically significant risk factor for postoperative wound infection. Conclusion: Flap type and postoperative wound infection were both independent risk factors influencing the flap survival rate in the foot and ankle. However, postoperative wound infection was a risk factor for the pedicled flap but not for the free flap. Microvascular anastomosis is a major cause of free flap necrosis. To reconstruct complex or wide soft tissue defects of the foot or ankle, free flaps are safer and more reliable than pedicled flaps and should thus be the primary choice. [ABSTRACT FROM AUTHOR]

Queen Nefertari, the favourite Royal Consort of Pharaoh Ramses II (Ancient Egypt, New Kingdom, 19th Dynasty c. 1250 BC) is famous for her beautifully decorated tomb in the Valley of the Queens. Her burial was plundered in ancient times yet still many objects were found broken in the debris when the tomb was excavated. Amongst the found objects was a pair of mummified legs. They came to the Egyptian Museum in Turin and are henceforth regarded as the remains of this famous Queen, although they were never scientifically investigated. The following multidisciplinary investigation is the first ever performed on those remains. The results (radiocarbon dating, anthropology, paleopathology, genetics, chemistry and Egyptology) all strongly speak in favour of an identification of the remains as Nefertari’s, although different explanations—albeit less likely—are considered and discussed. The legs probably belong to a lady, a fully adult individual, of about 40 years of age. The materials used for embalming are consistent with Ramesside mummification traditions and indeed all objects within the tomb robustly support the burial as of Queen Nefertari. [ABSTRACT FROM AUTHOR]

Background: The primary stability of the acetabular cup (AC) implant is an important determinant for the long term success of cementless hip surgery. However, it remains difficult to assess the AC implant stability due to the complex nature of the bone-implant interface. A compromise should be found when inserting the AC implant in order to obtain a sufficient implant stability without risking bone fracture. The aim of this study is to evaluate the potential of impact signals analyses to assess the primary stability of AC implants inserted in cadaveric specimens. Methods: AC implants with various sizes were inserted in 12 cadaveric hips following the same protocol as the one employed in the clinic, leading to 86 different configurations. A hammer instrumented with a piezoelectric force sensor was then used to measure the variation of the force as a function of time produced during the impact between the hammer and the ancillary. Then, an indicator I was determined for each impact based on the impact momentum. For each configuration, twelve impacts were realized with the hammer, the value of the maximum amplitude being comprised between 2500 and 4500 N, which allows to determine an averaged value IM of the indicator for each configuration. The pull-out force F was measured using a tangential pull-out biomechanical test. Results: A significant correlation (R2 = 0.69) was found between IM and F when pooling all data, which indicates that information related to the AC implant biomechanical stability can be retrieved from the analysis of impact signals obtained in cadavers. Conclusion: These results open new paths in the development of a medical device that could be used in the future in the operative room to help orthopedic surgeons adapt the surgical protocol in a patient specific manner. [ABSTRACT FROM AUTHOR]

Background: The posterior cruciate ligament (PCL) is the strongest ligament of the knee, serving as one of the major passive stabilizers of the tibio-femoral joint. However, despite a number of experimental and modelling approaches to understand the kinematics and kinetics of the ligament, the normal loading conditions of the PCL and its functional bundles are still controversially discussed. Objectives: This study aimed to generate science-based evidence for understanding the functional loading of the PCL, including the anterolateral and posteromedial bundles, in the healthy knee joint through systematic review and statistical analysis of the literature. Data sources: MEDLINE, EMBASE and CENTRAL Eligibility criteria for selecting studies: Databases were searched for articles containing any numerical strain or force data on the healthy PCL and its functional bundles. Studied activities were as follows: passive flexion, flexion under 100N and 134N posterior tibial load, walking, stair ascent and descent, body-weight squatting and forward lunge. Method: Statistical analysis was performed on the reported load data, which was weighted according to the number of knees tested to extract average strain and force trends of the PCL and identify deviations from the norms. Results: From the 3577 articles retrieved by the initial electronic search, only 66 met all inclusion criteria. The results obtained by aggregating data reported in the eligible studies indicate that the loading patterns of the PCL vary with activity type, knee flexion angle, but importantly also the technique used for assessment. Moreover, different fibres of the PCL exhibit different strain patterns during knee flexion, with higher strain magnitudes reported in the anterolateral bundle. While during passive flexion the posteromedial bundle is either lax or very slightly elongated, it experiences higher strain levels during forward lunge and has a synergetic relationship with the anterolateral bundle. The strain patterns obtained for virtual fibres that connect the origin and insertion of the bundles in a straight line show similar trends to those of the real bundles but with different magnitudes. Conclusion: This review represents what is now the best available understanding of the biomechanics of the PCL, and may help to improve programs for injury prevention, diagnosis methods as well as reconstruction and rehabilitation techniques. [ABSTRACT FROM AUTHOR]