Search

Application‐oriented assembly of two‐dimensional nanosheets with uniform nanochannels is critical for fabricating sophisticated, high‐performance membranes for water treatment. However, fabricating the desired membranes by a simple, fast, and effective method is a challenge as most of the previous methods are based on batch processes rather than a continuous roll‐to‐roll process. Here, a simple Meyer rod‐coating approach to continuously fabricate large‐size and flat MXene membranes at a scale up to 5 m is introduced. This study demonstrated that a high MXene concentration, above 10 mg mL−1, is critical in processability due to the desired viscosity, surface tension, and viscoelastic properties. The as‐made MXene membranes show that shearing and solutal‐Marangoni flow can considerably improve the ordering of the stacked MXene nanoflakes. Thus, the rod‐coated MXene membranes demonstrate a smaller surface roughness and interlayer distance compared to the MXene membranes fabricated by the most commonly vacuum‐assisted filtration. The rod‐costed MXene membranes show superior performance in dye and mono/divalent cation separation. The proposed roll‐to‐roll Meyer rod‐coating method can also be used to fabricate MXene‐based composites, such as MXene/carbon nanotubes and MXene/polymer, using the inks containing high concentration MXene and other desired compositions. This roll‐to‐roll method will promote an industry‐level fabrication and application of MXene‐based membranes. [ABSTRACT FROM AUTHOR]

The inherently intermittent feature of solar energy requires reliable energy conversion and storage systems for utilizing the most abundant solar energy. Phase change materials are potential solutions to store a large amount of heat produced by solar light. However, few of the phase change materials have the ability to efficiently convert solar energy into heat; additionally, phase change materials need to be encapsulated in porous substrates for enhancing their leaking resistance and photo-to-thermal performance. In this work, monolithic MXene aerogels, fabricated by Al3+ cross-linking and freeze-drying, were used as the encapsulation and photothermal materials. The composites phase change materials of MXene/polyethylene glycol can be made with a large polyethylene glycol loading above 90 wt% with the maximum of 97 wt%, owing to the large porosity of MXene aerogels. The low content of MXene has a limited impact on the phase transition temperature and enthalpy of polyethylene glycol, with an enthalpy retention rate ranging from 89.2 to 96.5% for 90–97 wt% polyethylene glycol loadings. MXene aerogels greatly improve the leaking resistance of polyethylene glycol above its melting point of 60 °C, even at 100 °C. The composites phase change materials also show outstanding cycling stability for 500 cycles of heat storage and release, retaining 97.7% of the heat storage capability. The optimized composite phase change material has a solar energy utilization of 93.5%, being superior to most of the reported results. Our strategy produces promising composite phase change materials for solar energy utilization using the MXene aerogels as the encapsulation and photothermal materials. [ABSTRACT FROM AUTHOR]

Ultrathin, transparent, and free‐standing films assembled from low‐dimensional nanomaterials (LDMs) are promising for various applications, including transparent heaters and membranes. However, the intact separation of the assembled films, especially those with controlled ultrathin thickness from deposited substrates, is a tremendous challenge, particularly for fast peeling off via self‐detaching. Herein, we propose a versatile method to rapidly peel off ultrathin assembled LDM films, including three types of carbon nanotubes, vermiculite, Ag nanowires, and carbon nanotube@graphene, by dissolving the MXene interlayer from the layer‐by‐layer filtered MXene/LDM Janus films using diluted H2O2. The MXene sacrificial interlayers play dual roles, including physical isolation of LDM films from filter membranes and the production of bubbles that buoy ultrathin LDM films, making them free‐standing. The integrality and self‐detaching rate of the LDM films are determined by the loading and reactivity of the MXene interlayers. The intact LDM films can self‐detach in 80 s by dissolving the optimized MXene interlayer and producing bubbles. The as‐made free‐standing ultrathin LDM films can be transferred to arbitrary substrates and exhibit outstanding performance as transparent heaters. This scalable method provides an efficient and versatile method to produce ultrathin, transparent, and free‐standing LDM films and finds new applications for the growing MXene family. [ABSTRACT FROM AUTHOR]

• Aerogels can be easily fabricated via cross-linking vermiculite and MXene. • The pore structures and surface compositions of aerogels can be finely tuned. • Monolithic aerogel has excellent CO 2 storing capacity by boosted hydrate formation. • Degree of water saturation plays the most vital role in hydrate formation. Gas hydrate provides an ideal way for CO 2 capture and storage using water by forming cages via an environment-friendly and energy-efficient hydrate formation process. However, the practical utilization and upscaling of hydrate-based gas storage are impeded by the slow formation kinetics of gas hydrate due to the limited multiphase interface for mass transfer and reaction. Herein, we demonstrated a simple strategy to fabricate composite aerogels assembled of natural vermiculite and MXene nanosheets as the ideal substrate for boosting CO 2 hydrate formation. The structure and surface compositions of vermiculite/MXene composite aerogels were analyzed by XRD, FT-IR, SEM, and XPS. It shows that monolithic pore structures and surface functional groups can be finely tuned by controlling the mass ratio of vermiculite and MXene, leading to an outstanding CO 2 storage capacity of 136.9 v/v (corresponding to 0.121 mol CO 2 /mol water) with enhanced hydrate formation kinetics. The degree of water saturation plays the most vital role in controlling formation kinetics and gas storage capacity. This work provides a reliable method to synthesize aerogels for boosting CO 2 storage via enhanced hydrate formation and sheds light on the structure performance relationship of porous materials for enhancing gas hydrate formation. [ABSTRACT FROM AUTHOR]

Interfacial water evaporation, powered by solar energy, holds great promise to extract freshwater from seawater on a global scale. It has the potential to address the world's water scarcity challenges using renewable energy. While the ideal design of evaporator materials is critical to the interfacial vaporization desalination, tailoring the structures and compositions of solar evaporators and figuring out the structure/composition-performance relationship of evaporators remains unexplored. Herein, 3D macroporous "brick-concrete" MXene/sodium alginate aerogel (MSA) evaporators were designed and fabricated with constant MXene content and varying polymer loading. The as-made MSAs show sodium alginate-dependent evaporating performance with an optimum evaporation rate of 3.28 kg m−2 h−1 (1 sun). This exceptional rate is attributed to several factors, including enhanced light absorption, optimized pore sizes, reduced enthalpy of evaporation and improved water transport. The water molecule states and hydrogen bonding network in the aerogels can be tuned by their compositions, resulting in the reduced evaporation enthalpy, the monolithic structures with controlled thermal conductivity facilitate the exploitation of environmental energy, leading to the high evaporation rate. Our study not only establishes design principles for achieving superior evaporation performance, but also sheds light on the relationship between structures, compositions, and performance of solar evaporators. • The "brick-concrete" structures were used to optimize the pore sizes of the 3D photothermal evaporators. • The functions of MSAs in water transport and hydrogen bond activization were systematically analyzed. • The as-prepared MSAs show excellent evaporation performance and reusability. [ABSTRACT FROM AUTHOR]