Search

Graphical abstract Highlights • Mesoporous NiO/GNS composites were fabricated by in-situ thermal deposition. • Graphene matrix serves as an efficient conductive network for supercapacitor electrodes. • Graphene matrix offered accessible electroactive sites for electrochemical reactions. • The nanocomposites exhibited high performance as supercapacitor electrodes. Abstract Scholars have attached increasing attention to Graphene nanosheet (hereinafter referred to as GNS)-loaded transition metal oxide composites owing to the ability of attaching inorganic nanoparticles with better capacity and capacitance and better capacity than GNS of conductive polymer materials. A novel mesoporous structure of NiO nanoplates encapsulated in graphene matrix was synthesized and designed rationally. The composite composed of GNS and mesoporous NiO nanoplates can expand the approximate specific surface area of electrolyte. It has various advantages, such as good charge transport and short ion diffusion path. In addition, the interconnected graphene conducting network, as an adhesive, can maintain structural stability and promote charge transport by encapsulating mesoporous NiO nanoplates. The specific capacity is increased to 1050 F g−1 through the improved optimized NiO/GNS hybrid electrodes. This study provides a new idea for the design and manufacture of high performance transition metal oxide energy storage devices. [ABSTRACT FROM AUTHOR]

Graphical abstract Using graphene as a conductive matrix, the homogeneous distribution of Co 3 O 4 nanoparticles was accomplished and volume changes in the nanoplates during charge–discharge process were effectively accommodated, resulting in the excellent electrochemical performance of the composites. The mesoporous structure of the Co 3 O 4 nanoparticles was suitable for the transfer of Ionic electrolyte by the electrochemical reaction. Co 3 O 4 /graphene nanocomposites are a candidate material for high-capacity, low-cost, and nontoxic electrode for supercapacitors. Highlights • Co 3 O 4 /graphene composites were prepared via an in situ thermal deposition method. • Graphene serves as an efficient conductive network for electrochemical reactions. • The nanocomposites exhibited high performance as supercapacitor electrodes. Abstract In situ synthesis of mesoporous Co 3 O 4 nanoparticles embedded in reduced graphene oxide nanosheets (GNSs) was implemented through coprecipitation method and pyrolytic process. In the charge-discharge process, electrolyte ions can fill with three-dimensional GNS matrix with connected pore network structures and mesoporous Co 3 O 4 nanoparticles with uniform nanoscale structures as double ion buffer reservoirs. The capacitance value of Co 3 O 4 /GNS nanocomposites is 1085.6 F g−1 at the current density of 2 A g−1 in 2 M KOH solution. The composite has good cyclic stability, and the maximum capacitance loss is only 17.3% in 10,000 successive cycles. [ABSTRACT FROM AUTHOR]

Abstract: Co3O4/graphene nanosheet (GNS) composites were synthesized via the in situ growth of mesoporous Co3O4 nanoparticles on graphene. The as-prepared Co3O4/GNS composites exhibited superior Li-ion battery performance and showed a large reversible capacity, excellent cycling, and good rate capability when used as an anode material in lithium ion batteries (LIBs). The uniform coating of Co3O4 around the graphene surface ensured tight electrical contact, resulting in a material with higher specific capacity and enhanced cycling performance compared with pure Co3O4 electrodes. The composites delivered a reversible capacity of 900mAhg−1 at a discharge current density of 100mAg−1 with good cycling ability. Moreover, the composites showed exceptional high-current charge–discharge performance, achieving 650mAhg−1 at a current density of 1000mAg−1. [Copyright &y& Elsevier]

Abstract: CuO nanoparticles are directly formed on graphene nanosheets through the in situ chemical decomposition of Cu(NO3)2·3H2O and are anchored tightly on the graphene surface. The lithiation-induced strain is naturally accommodated, owing to the constraint effect of the graphene matrix. Electrochemical characterization shows that CuO nanoparticles anchored on graphene sample exhibits a high capacity of about 660mAh/g at a discharge current density of 100mA/g and a good cycling ability. During the charge–discharge process, graphene nanosheets not only served as a three-dimensional conductive network for CuO nanoparticles, but also improve the detachment and agglomeration of CuO nanoparticles. This CuO/graphene nanocomposite displays superior Li-battery performance with large reversible capacity, excellent cyclic performance, and good rate capability. [Copyright &y& Elsevier]

Abstract: A MnO nanoparticle/graphene composite was prepared via in situ carbothermal reduction of Mn3O4 on the surface of graphene nanosheets. The formed MnO nanoparticles with diameters ranging from 20nm to 250nm integrated tightly with the graphene nanosheets. As anode material for lithium-ion batteries, the nanocomposite showed a high specific capacity of approximately 700mAhg−1 at 100mAg−1, excellent cyclic stability, and good rate capability. During the charge-discharge process, graphene nanosheets served as a three-dimensional conductive network for MnO nanoparticles. Furthermore, the detachment and agglomeration of MnO nanoparticles were effectively prevented due to the tight combination of MnO nanoparticles and graphene. [Copyright &y& Elsevier]