Search

The present review discusses the use of cyclodextrins and their derivatives to prepare electrospun nanofibers with specific features. Cyclodextrins, owing to their unique capability to form inclusion complexes with hydrophobic and volatile molecules, can indeed facilitate the encapsulation of bioactive compounds in electrospun nanofibers allowing fast-dissolving products for food, biomedical, and pharmaceutical purposes, filtering materials for wastewater and air purification, as well as a variety of other technological applications. Additionally, cyclodextrins can improve the processability of naturally occurring biopolymers helping the fabrication of "green" materials with a strong industrial relevance. Hence, this review provides a comprehensive state-of-the-art of different cyclodextrins-based nanofibers including those made of pure cyclodextrins, of polycyclodextrins, and those made of natural biopolymer functionalized with cyclodextrins. To this end, the advantages and disadvantages of such approaches and their possible applications are investigated along with the current limitations in the exploitation of electrospinning at the industrial level., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Alginate-based electrospun nanofibers prepared via electrospinning technique represent a class of materials with promising applications in the biomedical and pharmaceutical industries. However, to date, the effect of alginate molecular mass and block composition on the biological response of such systems remains to some extent unclear. As such, in the present work, three alginates (i.e., M.pyr, L.hyp, A.nod) with different molecular features are employed to prepare nanofibers whose ability to promote cell adhesion is explored by using both skin and bone cell lines. Initially, a preliminary investigation of the raw materials is carried out via rheological and zeta-potential measurements to determine the different grade of polyelectrolyte behaviour of the alginate samples. Specifically, both the molecular mass and block composition are found to be important factors affecting the alginate response, with long chains and a predominance of guluronic moieties leading to a marked polyelectrolyte nature (i.e., lower dependence of the solution viscosity upon the polymer concentration). Subsequently, physically crosslinked alginate nanofibrous mats are first morphologically characterized via both scanning electron and atomic force microscopy, which show a homogenous and defect-free structure, and their biological response is then evaluated. Noticeably, fibroblast and keratinocyte cell lines do not show significant differences in terms of cell adhesion on the three mats (i.e., 30-40% and 10-20% with respect to the seeded cells, respectively), with the formers presenting a greater affinity toward the alginate-based nanofibers. Conversely, both the investigated osteoblast cells are characterized by a distinct behaviour depending on the alginate type. Specifically, polysaccharide samples with an evident polyelectrolyte nature are found to better promote cell viability (i.e., cell adhesion in the range 15-36% with respect to seeded cells) compared to the ones displaying a nearly neutral behaviour (i.e., cell adhesion in the range 5-25% with respect to seeded cells). Therefore, the obtained results, despite being preliminary, suggest that the alginate type (i.e., molecular structure properties) may play a topical role in conditioning the efficiency of healing patches for bone reparation, but it has a negligible effect in the case of skin regeneration., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Composite chitosan–collagen nanofibrous mats embedded with curcumin were prepared via a single-step electrospinning procedure and explored as wound-healing patches with superior biological activity. A mild crosslinking protocol consisting of a short exposure to ammonia vapor and UV radiation was developed to ensure proper stability in physiological-like conditions without affecting the intrinsic biocompatibility of chitosan and collagen. The fabricated composite patches displayed a highly porous, homogeneous nanostructure consisting of fibers with an average diameter of 200 nm, thermal stability up to 200 °C, mechanical features able to ensure protection and support to the new tissues, and water-related properties in the ideal range to allow exudate removal and gas exchange. The release kinetic studies carried out in a simulated physiological environment demonstrated that curcumin release was sustained for 72 h when the mats are crosslinked hence providing prolonged bioactivity reflected by the displayed antioxidant properties. Remarkably, combining chitosan and collagen not only ensures prolonged stability and optimal physical–chemical properties but also allows for better-promoting cell adhesion and proliferation and enhanced anti-bacteriostatic capabilities with the addition of curcumin, owing to its beneficial anti-inflammatory effect, ameliorating the attachment and survival/proliferation rates of keratinocytes and fibroblasts to the fabricated patches. [ABSTRACT FROM AUTHOR]

This review covers recent developments and progress in polymer and biopolymer blending and material preparation by electrospinning. Electrospinning is a technique that is used to produce nanofibers to improve the quality of membranes. Electrospun nanofibers are highly applicable in biomedical sciences, supercapacitors, and in water treatment following metal ion adsorption. The key affecting factors of electrospinning have been checked in the literature to obtain optimal conditions of the electrospinning process. Future research directions and outlooks have been suggested to think about innovative ideas for research in this field. [ABSTRACT FROM AUTHOR]

Alginate is a naturally occurring polysaccharide commonly derived from brown algae cell walls which possesses unique features that make it extremely promising for several biomedical and pharmaceutical purposes. Alginate biomaterials are indeed nowadays gaining increasing interest in drug delivery and tissue engineering applications owing to their intrinsic biocompatibility, nontoxicity, versatility, low cost, and ease of functionalization. Specifically, alginate-based nanostructures show enhanced capabilities with respect to alginate bulk materials in the targeted delivery of drugs and chemotherapies, as well as in helping tissue reparation and regeneration. Hence, it is not surprising that the number of scientific reports related to this topic have rapidly grown in the last decade. With these premises, the present review aims to provide a comprehensive state-of-the-art of the most recent advances in the preparation of alginate-based nanoparticles and electrospun nanofibers for drug delivery, cancer therapy, and tissue engineering purposes. After a short introduction concerning the general properties and uses of alginate and the concept of nanotechnology, the recent literature is then critically presented to highlight the main advantages of alginate-based nanostructures. Finally, the current limitations and the future perspectives and objectives are discussed in detail. [ABSTRACT FROM AUTHOR]

ABSTRACT: The methodology to create alginate and alginate/hyaluronic acid membranes, which involves wet conditions electrospinning, is presented in this paper. The wet conditions allow simultaneously to work in water solutions avoiding the toxic solvents and to obtain crosslinked alginate. An accurate rheological characterization of all solutions examined is performed. By optimizing the electrospinning parameters, it is possible to obtain alginate membranes with homogeneous nanofibers and a narrow diameter distribution (i.e., around 100 nm) as well as alginate/hyaluronic acid membranes characterized by a network of bimodal distribution of the dimensions, namely nanofibers with a diameter comparable to the ones of the alginate membrane, in which are blocked microfibers with a ribbon like appearance, as observed in the SEM images. In order to facilitate the electrospinning process, poly(ethylene oxide) is added to the solutions and then removed after membranes preparation, as demonstrated by the differential scanning calorimetry results, obtaining membranes made up only biopolymers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46390. [ABSTRACT FROM AUTHOR]

Poly(vinyl alcohol) nanofibrous mats containing ad hoc synthesized gold nanostructures were prepared via a single-step electrospinning procedure and investigated as a novel composite platform with several potential applications. Specifically, the effect of differently shaped and sized gold nanostructures on the resulting mat physical-chemical properties was investigated. In detail, nearly spherical nanoparticles and nanorods were first synthesized through a chemical reduction of gold precursors in water by using (hexadecyl)trimethylammonium bromide as the stabilizing agent. These nanostructures were then dispersed in poly(vinyl alcohol) aqueous solutions to prepare nanofibrous mats, which were then stabilized via a humble thermal treatment able to enhance their thermal stability and water resistance. Remarkably, the nanostructure type was proven to influence the mesh morphology, with the small spherical nanoparticles and the large nanorods leading to thinner well defined or bigger defect-rich nanofibers, respectively. Finally, the good mechanical properties shown by the prepared composite mats suggest their ease of handleability thereby opening new perspective applications. [ABSTRACT FROM AUTHOR]

Chitosan nanofibrous membranes are prepared via an electrospinning technique and explored as potential wound healing patches. In particular, the effect of a physical or chemical crosslinking treatment on the mat morphological, mechanical, water-related, and biological properties is deeply evaluated. The use of phosphate ions (i.e., physical crosslinking) allows us to obtain smooth and highly homogenous nanofibers with an average size of 190 nm, whereas the use of ethylene glycol diglycidyl ether (i.e., chemical crosslinking) leads to rougher, partially coalesced, and bigger nanofibers with an average dimension of 270 nm. Additionally, the physically crosslinked mats show enhanced mechanical performances, as well as greater water vapour permeability and hydrophilicity, with respect to the chemically crosslinked ones. Above all, cell adhesion and cytotoxicity experiments demonstrate that the use of phosphate ions as crosslinkers significantly improves the capability of chitosan mats to promote cell viability owing to their higher biocompatibility. Moreover, tuneable drug delivery properties are achieved for the physically crosslinked mats by a simple post-processing impregnation methodology, thereby indicating the possibility to enrich the prepared membranes with unique features. The results prove that the proposed approach may lead to the preparation of cheap, biocompatible, and efficient chitosan-based nanofibers for biomedical and pharmaceutical applications. [ABSTRACT FROM AUTHOR]

Polyvinylpyrrolidone electrospun membranes characterized by randomly, partially, or almost completely oriented nanofibers are prepared using a drum collector in static (i.e., 0 rpm) or rotating (i.e., 250 rpm or 500 rpm) configuration. Besides a progressive alignment alongside the tangential speed direction, the nanofibers show a dimension increasing with the collector rotating speed in the range 410–570 nm. A novel design of experiment approach based on a face-centred central composite design is employed to describe membrane mechanical properties using the computation of mathematical models and their visualization via response surface methodology. The results demonstrate the anisotropic nature of the fibre-oriented membranes with Young's modulus values of 165 MPa and 71 MPa parallelly and perpendicularly to the alignment direction, respectively. Above all, the proposed approach is proved to be a promising tool from an industrial point of view to prepare electrospun membranes with a tailored mechanical response by simply controlling the collector speed. [ABSTRACT FROM AUTHOR]