Search

Membranes are important in the pharmaceutical industry for the separation of antibiotics and salts. However, its widespread adoption has been hindered by limited control of the membrane microstructure (pore architecture and free‐volume elements), separation threshold, scalability, and operational stability. In this study, 4,4′,4′′,4′′′‐methanetetrayltetrakis(benzene‐1,2‐diamine) (MTLB) as prepared as a molecular building block for fabricating thin‐film composite membranes (TFCMs) via interfacial polymerization. The relatively large molecular size and rigid molecular structure of MTLB, along with its non‐coplanar and distorted conformation, produced thin and defect‐free selective layers (~27 nm) with ideal microporosities for antibiotic desalination. These structural advantages yielded an unprecedented high performance with a water permeance of 45.2 L m−2 h−1 bar−1 and efficient antibiotic desalination (NaCl/adriamycin selectivity of 422). We demonstrated the feasibility of the industrial scaling of the membrane into a spiral‐wound module (with an effective area of 2.0 m2). This module exhibited long‐term stability and performance that surpassed those of state‐of‐the‐art membranes used for antibiotic desalination. This study provides a scientific reference for the development of high‐performance TFCMs for water purification and desalination in the pharmaceutical industry. [ABSTRACT FROM AUTHOR]

In this study, we focused on the effective disposal of radioactive wastewater through the development of nanofiltration membranes using biomass materials. We developed functionalized nanofilms using a bio-derived polymer for the decontamination of nuclear wastewater. The synthesis involved a straightforward interfacial polymerization (IP) process, followed by post-functionalization with polyethyleneimine (PEI). We investigated the impact of curdlan self-assembly on membrane separation performance, both pre- and post-IP reaction. Simultaneous self-assembly of curdlan and PEI grafting led to membranes exhibiting superior separation performance. By manipulating PEI molecular weights, we optimized the membranes' physicochemical properties, leading to superior separation efficiency. As a result, exceptional rejections of Co2+, Sr2+, and Cs+ ions were achieved, with rejection rates reaching 95.5 %, 93.7 %, and 92.54 %, respectively. Furthermore, long-term stability experiments validated the membrane's potential for purifying nuclear wastewater. These findings hold promise for the application of biomaterial-based membranes in the treatment of radioactive nuclear wastewater. [Display omitted] • Curdlan with self-assembly properties was applied as an aqueous phase to regulate the interfacial polymerization process. • Polyethyleneimine (PEI) post-functionalization were introduced to tune the surface charge and pore size of the TFC membranes. • The novel positively-charged TFC membranes exhibited excellent nuclear wastewater sieving ability. [ABSTRACT FROM AUTHOR]