Search

In this study industrial grade Multi-walled carbon nanotubes (MWCNTs) nanoparticles dispersed in distilled water (DW) are investigated to evaluate its impact on the thermal behavior of linear Fresnel solar reflector technology. The stability and thermophysical properties of the MWCNTs/DW nanofluids are obtained experimentally. Stable nanofluids that showed higher thermal conductivity compared to DW were obtained. Thermal conductivity (TC) of the nanofluids increased by 3%, 6% and 7% for the volume fractions of 0.05%, 0.1% and 0.3% at 25 °C, respectively. TC also increased with the increase in temperature (i.e. 11% for 0.3% volume fraction at 70 °C). A one-dimensional model is developed to evaluate the transient behavior of the nanofluid within the linear solar reflector. Matlab code based on the finite difference method is developed to solve the energy balance equations at the different components of the studied solar collector. The numerical model is then validated with experimental results, where a maximum experimental thermal efficiency of 29.205% at 14:00 is achieved. MWCNTs/DW nanofluid with 0.3% volume fraction has the highest thermal efficiency of 33.81% and the highest PEC value as well as the lowest entropy generation. • Small linear Fresnel reflector has been manufactured and experimentally tested. • The maximum experimental thermal efficiency of DW is equal to 29.205%. • Stability and thermophysical properties of the MWCNTs/DW nanofluids are obtained. • Thermal conductivity of the nanofluids increased with the increasing volume fractions. • Highest thermal efficiency of 33.81% was obtained for MWCNTs/DW nanofluid. [ABSTRACT FROM AUTHOR]